Commercially available and laboratory-prepared multi-walled carbon nanotubes (MWCNTs) are systematically investigated by the use of micro-Raman spectroscopy (MRS), thermogravimetric analysis (TGA) and complementary techniques (scanning electron microscopy (SEM) and transmission electron microscopy (TEM)) with the aim of establishing a standardised postgrowth diagnostic protocol for the assessment of their overall crystalline quality. By studying a set of 'reference' samples, clear correlations are evidenced between the Raman graphitisation indexes (D/G, G /G and G /D intensity ratios) commonly adopted to describe the crystalline arrangement of nanotubes, and their reactivity towards oxygen, as measured by the apparent activation energy needed for their oxidation, inferred from the kinetic analysis in quasi-isothermal conditions. The higher the crystalline perfection degree, the higher the energy needed for oxidising them. The efficacy of the found correlations in indirectly assessing the reactivity of nanotubes prepared under different conditions is successfully demonstrated by the use of a second set of samples. The physical meaning and range of validity of the shown correlations are further discussed. Copyright

Chemical vapor deposition (CVD) is widely utilized to synthesize graphene with controlled properties for many applications, especially when continuous films over large areas are required. Although hydrocarbons such as methane are quite efficient precursors for CVD at high temperature (∼1000 °C), finding less explosive and safer carbon sources is considered beneficial for the transition to large-scale production. In this work, we investigated the CVD growth of graphene using ethanol, which is a harmless and readily processable carbon feedstock that is expected to provide favorable kinetics. We tested a wide range of synthesis conditions (i.e., temperature, time, gas ratios), and on the basis of systematic analysis by Raman spectroscopy, we identified the optimal parameters for producing highly crystalline graphene with different numbers of layers. Our results demonstrate the importance of high temperature (1070 °C) for ethanol CVD and emphasize the significant effects that hydrogen and water vapor, coming from the thermal decomposition of ethanol, have on the crystal quality of the synthesized graphene.

Liquid phase functionalisation of carbon nanotubes is carried out via a H 2 SO 4 + HNO 3 mixture, and the effect of the sulphuric to nitric acid volume ratio (1:3-3:1) is systematically investigated by means of complementary techniques, observing the expected progressive downgrade of the crystalline quality, along with the increase of oxygenated functionality concentration. In addition, in contrast with common expectations, the results obtained demonstrate that the concentration of carboxylic groups (acids and anhydrides) never exceeds that of all other functionalities (lactones, phenols, quinones/carbonyls and sulphonic groups) introduced by chemical oxidation. Only by using equal volumes of sulphuric and nitric acids the concentrations of carboxylic and non-carboxylic groups become comparable. Raman analysis reveals that a change in the sample homogeneity accompanies the variations of the relative proportions of the various oxygenated groups, by the typology of which the vibration modes of carbon pairs and carbon rings appear to be affected to different extents.

No abstract

SummaryGraphene films were produced by chemical vapor deposition (CVD) of pyridine on copper substrates. Pyridine-CVD is expected to lead to doped graphene by the insertion of nitrogen atoms in the growing sp2 carbon lattice, possibly improving the properties of graphene as a transparent conductive film. We here report on the influence that the CVD parameters (i.e., temperature and gas flow) have on the morphology, transmittance, and electrical conductivity of the graphene films grown with pyridine. A temperature range between 930 and 1070 °C was explored and the results were compared to those of pristine graphene grown by ethanol-CVD under the same process conditions. The films were characterized by atomic force microscopy, Raman and X-ray photoemission spectroscopy. The optical transmittance and electrical conductivity of the films were measured to evaluate their performance as transparent conductive electrodes. Graphene films grown by pyridine reached an electrical conductivity of 14.3 × 105 S/m. Such a high conductivity seems to be associated with the electronic doping induced by substitutional nitrogen atoms. In particular, at 930 °C the nitrogen/carbon ratio of pyridine-grown graphene reaches 3%, and its electrical conductivity is 40% higher than that of pristine graphene grown from ethanol-CVD.