Nitrogen-doped graphene films from chemical vapor deposition of pyridine: influence of process parameters on the electrical and optical properties

Abstract

SummaryGraphene films were produced by chemical vapor deposition (CVD) of pyridine on copper substrates. Pyridine-CVD is expected to lead to doped graphene by the insertion of nitrogen atoms in the growing sp2 carbon lattice, possibly improving the properties of graphene as a transparent conductive film. We here report on the influence that the CVD parameters (i.e., temperature and gas flow) have on the morphology, transmittance, and electrical conductivity of the graphene films grown with pyridine. A temperature range between 930 and 1070 °C was explored and the results were compared to those of pristine graphene grown by ethanol-CVD under the same process conditions. The films were characterized by atomic force microscopy, Raman and X-ray photoemission spectroscopy. The optical transmittance and electrical conductivity of the films were measured to evaluate their performance as transparent conductive electrodes. Graphene films grown by pyridine reached an electrical conductivity of 14.3 × 105 S/m. Such a high conductivity seems to be associated with the electronic doping induced by substitutional nitrogen atoms. In particular, at 930 °C the nitrogen/carbon ratio of pyridine-grown graphene reaches 3%, and its electrical conductivity is 40% higher than that of pristine graphene grown from ethanol-CVD.

Carbon Dots Dispersed on Graphene/SiO2/Si: A Morphological Study

“…Graphene is the archetypal two‐dimensional (2D) material attracting a constant interest because of its stability, combined with excellent electrical, mechanical, and optical properties . Among the graphene synthesis methods, the chemical vapor deposition (CVD) on metal foils is a promising technique to deliver large‐area films with controlled properties for many applications . Perhaps more than the growth process itself, the transfer of atom‐thick CVD‐Gr sheets from the growth substrate to the target substrate is a crucial aspect of the fabrication of any graphene‐based device.…”

Efficient Gelation of Graphene Oxide Aqueous Dispersion Induced by Sonication‐Promoted Leuckart Reaction

“…Interestingly, the relative nitrogen content in the GO hydrogel is higher than in the GO+NH 4 OH (Entry 3, Table ), despite the dilution of N proportion by adding GO+HCOOH during the preparation of the GO hydrogel. The N 1s spectrum of the GO hydrogel (Figure f) can be fitted to two components, one at 399 eV being the pyridine/imine present also in the N 1s spectrum of the GO+NH 4 OH (Figure e), and a component at 401.9 eV which is absent in the GO+NH 4 OH attributed to amine/ammonium in a graphene environment …”

The Role of Graphene‐Based Derivative as Interfacial Layer in Graphene/n‐Si Schottky Barrier Solar Cells

“…Doping treatment can induce modification in the graphene lattice, resulting in an effect on the vibrational modes probed by Raman spectroscopy . It is possible to obtain information about carriers concentration and strain by evaluating the G and 2D bands frequency .…”

“…In the present work, we report on the use of a GBD made by chemical vapor deposition (CVD) to be used in a SBSC as interfacial layer between few‐layer graphene (FLG, acting as transparent conductive electrode) and n‐Si (the absorber). Specifically, this GBD is grown by ethanol‐CVD at ≈800° C (i.e., a temperature 200° C lower than the standard one used to grow graphene) and as a result its lattice is less crystalline on the long range than pristine graphene and contains heterogeneous groups composed of a mixed phase of sp 2 /sp 3 ‐hybridized carbon atoms such as hydrogenated (CH), carboxyl (COH), or epoxide (COC) bonds . These features reflects in a higher sheet resistance than graphene's, as well as modified UV–vis absorbance and work function (Wf) .…”