During the production process, turbine blades are subjected to a solubilization heat treatment, followed by tempering treatment, in order to obtain better mechanical properties. It is observed that, in some cases, permanent distortion can occur during the high temperature treatment (austenitising temperature). In this work, a high temperature creep resisting steel blade with a simplified geometry is considered. A finite element model is developed considering: the material properties depending on temperature, phase transformation and viscoplasticity (Nabarro-Herring and bilinear kinematic models). A nonlinear transient thermo-mechanical analysis is performed to simulate a standard thermal cycle. Material properties are partially calibrated based on dilatometric tests and partially from data available in literature. Adopting a laser scanner system, the blades geometry is measured before and after the heat treatment to calculate the permanent deflection. Comparing numerical results with experiments, it has been observed that the distortion phenomenon is mainly affected by the low-stress diffusional creep. This effect is due to the fact that, during the heat treatment, the blade is held at high temperature for a relatively long time according to a particular supporting lay-out. To minimize the permanent distortion, the numerical model permits an appropriate supporting system to be set-up, whose validity has been confirmed experimentally.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.