Electronic materials and devices that can mimic biological systems featured with elasticity, toughness, self-healing, degradability, and environmental friendliness drive the technological developments in fields spanning from bioelectronics, biomedical diagnosis and therapy, electronic skin, and soft robotics to Internetof-Things with "green" electronics. Among them, ionic devices based on gel electrolytes have emerged as attractive candidates for biomimetic systems. Herein, we presented a straightforward approach to demonstrate soft ionic microdevices based on a versatile organohydrogel platform acting as both a free-standing, stretchable, adhesive, healable, and entirely degradable support and a highly conductive, dehydration-and freezing-tolerant electrolyte. This is achieved by forming a gelatin/ferric-ion-cross-linked polyacrylic acid (GEL/PAA) dual dynamic supramolecular network followed by soaking into a NaCl glycerol/water solution to further toughen the gelatin network via solvent displacement, thus obtaining a high toughness of 1.34 MJ•cm −3 and a high ionic conductivity (>7 mS•cm −1 ). Highly stretchable and multifunctional ionic microdevices are then fabricated based on the organohydrogel electrolytes by simple transfer printing of carbon-based microelectrodes onto the prestretched gel surface. Proof-of-concept microdevices including resistive strain sensors and microsupercapacitors are demonstrated, which displayed outstanding stretchability to 300% strain, resistance to dehydration for >6 months, autonomous self-healing, and rapid room-temperature degradation within hours. The present material design and fabrication approach for the organohydrogel-based ionic microdevices will provide promising scope for life-like and sustainable electronic systems.
Double-network tough hydrogels have raised increasing interest in stretchable electronic applications as well as electronic skin (e-skin) owing to their excellent mechanical properties and functionalities. While hydrogels have been extensively explored as solid-state electrolytes, stretchable energy storage devices based on tough hydrogel electrolytes are still limited despite their high stretchability and strength. A key challenge remains in the robust electrode/electrolyte interface under large mechanical strains. Inspired by the skin structure that involves the microstructured interface for the tight connection between the dermis and epidermis, we demonstrated that a surface-microstructured tough hydrogel electrolyte composed of agar/polyacrylamide/LiCl (AG/PAAm/LiCl) could be exploited to allow stretchable supercapacitors with enhanced mechanical and electrochemical performance. The prestretched tough hydrogel electrolyte was treated to generate surface microstructures with a roughness of tens of micrometers simply via mechanical rubbing followed by the attachment of activated carbon electrodes on both sides to realize the fabrication of the stretchable supercapacitor. Through investigating the properties of the tough hydrogel electrolyte and the electrochemical performance of the as-fabricated supercapacitors under varied strains, the surface-microstructured hydrogel electrolyte was shown to enable robust adhesion to electrodes, improving electrochemical behavior and capacitance, as well as having better performance retention under repeated stretching cycles, which surpassed the pristine hydrogel with smooth surfaces. Our approach could provide an alternative and general strategy to improve the interfacial properties between the electrode and the hydrogel electrolyte, driving new directions for functional stretchable devices based on tough hydrogels.
Organic electrochemical transistors (OECTs) have emerged as versatile platforms for broad applications spanning from flexible and wearable integrated circuits to biomedical monitoring to neuromorphic computing. A variety of materials and tailored micro/nanostructures have recently been developed to realized stretchable OECTs, however, a solid-state OECT with high elasticity has not been demonstrated to date. Herein, we present a general platform developed for the facile generation of highly elastic all-polymer OECTs with high transconductance (up to 12.7 mS), long-term mechanical and environmental durability, and sustainability. Rapid prototyping of these devices was achieved simply by transfer printing lithium bis(trifluoromethane)sulfonimide doped poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS/LiTFSI) microstructures onto a resilient gelatin-based gel electrolyte, in which both depletion-mode and enhancement-mode OECTs were produced using various active channels. Remarkably, the elaborate 3D architectures of the PEDOT:PSS were engineered, and an imprinted 3D-microstructured channel/electrolyte interface combined with wrinkled electrodes provided performance that was retained (> 70%) through biaxial stretching of 100% strain and after 1000 repeated cycles of 80% strain. Furthermore, the anti-drying and degradable gelatin and the self-crosslinked PEDOT:PSS/LiTFSI jointly enabled stability during > 4 months of storage and on-demand disposal and recycling. This work thus represents a straightforward approach towards high-performance stretchable organic electronics for wearable/implantable/neuromorphic/sustainable applications.
Chinese Cordyceps is a well-known medicinal larva-fungus symbiote distributed in the Qinghai-Tibetan Plateau and adjacent areas. Previous studies have involved its artificial cultivation but commercial cultivation is difficult to perform because the crucial factors triggering the occurrence of Chinese Cordyceps are not quite clear. The occurrence of Chinese Cordyceps is greatly affected by the soil environment, including the soil’s physicochemical and microecological properties. In this study, the effects of these soil properties on the occurrence of Chinese Cordyceps were investigated. The results show that the physicochemical properties, including easily oxidizable organic carbon (EOC), soil organic carbon (SOC), humic acid carbon (HAC), humin carbon (HMC), and pH, might be negatively related to the occurrence of Chinese Cordyceps, and soil water content (SWC) might be positively related. Several soil physicochemical parameters (pH, SOC, HMC, HAC, available potassium (APO), available phosphorus (APH), microbial biomass carbon (MBC), and the ratio of NH4+ to NO3− (NH4+/NO3−)) and microbial properties interact and mix together, which might affect the occurrence of Chinese Cordyceps. Soil microbial community structure was also a possible factor, and a low level of bacterial and fungal diversity was suitable for the occurrence of Chinese Cordyceps. The intra-kingdom network revealed that a closer correlation of the bacterial community might help the occurrence of Chinese Cordyceps, while a closer correlation of the fungal community might suppress it. The inter-kingdom network revealed that the occurrence rate of Chinese Cordyceps might be negatively correlated with the stability of the correlation state of the soil habitat. In conclusion, this study shows that soil physicochemical properties and microbial communities could be greatly related with the occurrence of Chinese Cordyceps. In addition, soil physicochemical properties, the level of bacterial and fungal diversity, and correlations of bacterial and fungal communities should be controlled to a certain level to increase the production of Chinese Cordyceps in artificial cultivation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.