ABSTRAKSimulator SpO 2 yang mengemulasikan sinyal yang ekuivalen dengan saturasi oksigen pada manusia, dapat digunakan untuk evaluasi repeatibility pulse oximeter. Simulator ini tersedia di pasaran dengan harga yang cukup mahal di Indonesia, di kisaran 80-100 juta rupiah. Studi ini bertujuan untuk mengembangkan simulator SpO2 dengan biaya rendah, menggunakan komponen elektronika umum yang ada di pasaran. Karakteristik simulasi mengacu kepada referensi yang diambil dari simulator komersial dengan menggunakan sistem akuisisi data berbasis LabVIEW. Kadar saturasi oksigen disimulasikan dengan mengatur intensitas cahaya light emitting diode (LED), untuk meniru penyerapan cahaya oleh darah pada pembuluh arteri. Digital to analog converter digunakan sebagai LED driver, untuk mengatur besar tegangan ke LED yang berbanding lurus dengan intensitas cahaya. Sebagai pembuktian konsep, studi ini berhasil menyimulasikan kadar saturasi oksigen 80% dengan galat mencapai 11.25%, dan 80 denyut jantung per menit dengan galat 6.25%. Hasil simulasi belum bisa dibandingkan dengan simulator komersial, karena hasil yang belum stabil. Total biaya untuk komponen perangkat keras, mencapai satu juta rupiah.Kata kunci: simulator, saturasi oksigen, pulse oximeter, digital to analog converter, light emitting diode ABSTRACT SpO2 simulator, which emulates signal that equivalent to oxygen saturation level of human, can be used to evaluate repeatibility of pulse oximeter. SpO2 simulators are available in Indonesia, but the price is quite expensive, in range of 80-100 million rupiah. The study aims to develop low-cost SpO2 simulator, using common electronic components. Characteristic of simulation refer to reference data, which taken from commercial simulator using LabVIEW based data acquisition system. Level of oxygen saturation is simulated by adjusting beam intensity of light emitting diode (LED), to imitate light absorbance by arterial blood. Digital to analog converter is used as LED driver, to control voltage to LED that directly proportional to light intensity. As a proof of concept, SpO2 simulation has been successfully performed at level 80% with error reaches 11.25% deviation, and heart rate 80 beat per minute with error reaches 6.25%. The simulation result had not compared yet to a commercial simulator, due to the unstable result. Total cost for hardware components of the prototype is around one million rupiah.
ABSTRAKDalam proses evaluasi performa tensimeter otomatis, simulator tekanan darah biasa digunakan sebagai nilai referensi. Simulator akan memberikan osilasi tekanan yang merepresentasikan detak jantung pada manset tensimeter untuk menyimulasikan tekanan darah sesuai metode osilometrik. Studi ini merupakan bagian dari pengembangan simulator tekanan darah. Studi ini bertujuan untuk menganalisis karakteristik osilometrik dari sebuah simulator tekanan darah komersial, untuk kemudian digunakan sebagai data referensi untuk pengembangan simulator tekanan darah. Data osilometrik diambil dari simulator komersial dengan menggunakan sistem akuisisi data berbasis LabVIEW. Pengambilan data untuk beberapa simulasi tekanan darah orang dewasa yang tersedia pada simulator dilakukan dengan metode pengukuran deflasi. Data diperoleh dengan metode pengukuran deflasi. Titik mulai osilasi adalah 20 mmHg di atas nilai sistol dan terjadi perbedaan tingkat penurunan osilasi setelah 5 mmHg di bawa nilai diastol. Untuk detak jantung 80 detak per menit, osilasi terjadi setiap 750 milidetik. Nilai mean arterial pressure berbeda untuk tiap nilai tekanan darah.Kata kunci: karakteristik, osilometrik, simulator, tekanan darah, tensimeter.ABSTRACTIn a performance evaluation process of an automatic sphygmonamometer a blood pressure simulator is usually used as reference input. A blood pressure simulator will generates pressure oscillation which represents heart beat to simulates blood pressure as in oscillometric method. This study is part of development of low-cost blood pressure simulator. This study analyze oscillometric characteristic of a blood pressure simulator that the result is used as reference for the development of blood pressure simulator. Oscillometric data was acquired from a commercial simulator using data acquisition system that based on LabVIEW. Data was taken for a few preset blood pressure simulations with deflation measurement method. Data was gathered with deflation measurement method. Starting point of oscillation is at 20 mmHg above the sistolic value and there is different decreasing slope after 5 mmHg below the diastolic value. For pulse 80 beat per minute, the oscillation occurs every 750 milisecond. The mean arterial pressure is different for each blood pressure value.Keywords: characteristic, oscillometric, simulator, blood pressure, sphygmomanometer.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.