The comparative study on preparation and characterization of modified bentonite and kaolin clay types is aimed at establishment of the ability of these clay types to adsorb pollutants. Its low cost, availability and recovery of clay give it added advantage of an effective adsorbent. The modified clay types were prepared by impregnation using various concentrations of either H 2 SO 4 or NaOH in w/v ratio of 1:2. The physicochemical and adsorptive properties were investigated using standard physicochemical methods like moisture content, bulk density, pH, iodine and methylene blue numbers. FTIR, XRD and SEM analyses were also conducted on these clay types. Unmodified kaolin clay exhibited lowest moisture content (1.12%) while unmodified bentonite clay type had highest value (3.98%). The peaks at 3435 cm −1 and 3410 cm −1 assigned N-H stretching frequency were obtained for 2 M H 2 SO 4 modified and unmodified bentonite clay types, respectively. The peaks at 912 cm −1 and 914 cm −1 that indicate the presence of Al-Al-OH deformation frequency were obtained for unmodified bentonite clay type and 2 M H 2 SO 4 modified bentonite clay, respectively. The physical surface morphology of the clay types revealed the presence of pores with irregular shapes, while their XRD analysis showed that the clay types are crystalline. The modified clay types exhibited better potential adsorbent for removal of small metallic or gas molecules as well as large organic molecules. Adsorbents could also remove cations or anions of pollutants since their surface charge could be positive or negative depending upon pH condition.
Properties of raw bentonite clay of Afuze in Edo state which are abundant and cheap bentonite mineral in Nigeria as adsorbents for the removal of atrazine in aqueous solution were investigated. The bentonite clay-types were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry and X-ray diffraction (XRD). Batch adsorption experiments were carried out to determine the equilibrium characteristics, thermodynamics and kinetics of the sorption processes. The data obtained were subjected to Langmuir, Freundlich and Temkin isotherm equations, while pseudo-first-order, pseudo-second-order rate equations, intra-particle diffusion and Elovich models were considered for kinetics and mechanism. The results showed that the adsorption processes were described by different isotherm models; they were all spontaneous (∆G ranges from − 938.34 to − 6263.58 kJ/mol) and exothermic (range of ∆H is − 252.73 to − 1057.08 kJ/mol), and with decreased randomness, ∆S (− 3.110 to − 0.581 J.mol/K). Pseudo-second-order kinetics model gave the better fit for all the sorption processes which implies physisorption process as the rate limiting step. Thus, bentonite clay-types can be used to adsorb atrazine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.