We report on highly efficient, bioresponsive, controlled-release antibacterial coatings constructed by direct assembly of tannic acid (TA) with one of several cationic antibiotics (tobromycin, gentamicin, and polymyxin B) using the layer-by-layer (LbL) technique. These films exhibit a distinct “self-defense” behavior triggered by acidification of the immediate environment by pathogenic bacteria, such as Staphylococcus epidermidis (S. epidermidis) or Escherichia coli (E. coli). Films assembled using spin-assisted and dip-assisted techniques show drastically different morphology, thickness and pH-/bacteria-triggered antibiotic release characteristics. While dip-deposited films have rough surfaces with island-like, granular structures regardless of the film thickness, spin-assisted LbL assemblies demonstrate a transition from linear deposition of uniform 2D films to a highly developed 3D morphology for films thicker than ∼45 nm. Ellipsometry, UV–vis and mass spectrometry confirm that all coatings do not release antibiotics in phosphate buffered saline at pH 7.4 for as long as one month in the absence of bacteria and therefore do not contribute to the development of antibiotic resistance. These films do, however, release antibiotics upon pH lowering. The rate of triggered release can be controlled through the choice of assembled antibiotic and the assembly technique (spin- vs dip-deposition) and by the spinning rate used during deposition, which all affect the strength of TA–antibiotic binding. TA/antibiotic coatings as thin as 40 nm strongly inhibit S. epidermidis and E. coli bacterial growth both at surfaces and in surrounding medium, but support adhesion and proliferation of murine osteoblast cells. These coatings thus present a promising way to incorporate antibacterial agents at surfaces to prevent bacterial colonization of implanted biomedical devices.
Electron ionization (EI) mass spectra are not very helpful for characterizing ortho, meta, and para isomers of underivatized haloanilines since their spectra are virtually identical. In contrast, when the amino group of chloro-, bromo-, or iodoanilines is transformed to an N-formyl, N-acetyl, or N-benzoyl derivative, the spectra of the derivatives reveal a highly dramatic loss of a halogen radical, instead of an HX elimination usually expected from an "ortho effect." For example, the spectra of N-formyl, N-acetyl, and N-benzoyl derivatives of ortho isomers of chloro-, bromo-, and iodoanilines show a very prominent peak at m/z 120, 134, and 196, respectively, for the loss of the corresponding halogen atom.
In addition to the well-known SO2 loss, there are several additional fragmentation pathways that gas-phase anions derived from N-phenyl benzenesulfonamides and its derivatives undergo upon collisional activation. For example, N-phenyl benzenesulfonamide fragments to form an anilide anion (m/z 92) by a mechanism in which a hydrogen atom from the ortho position of the benzenesulfonamide moiety is specifically transferred to the charge center. Moreover, after the initial SO2 elimination, the product ion formed undergoes primarily, an inter-annular H2 loss to form a carbazolide anion (m/z 166) because the competing intra-annular H2 loss is significantly less energetically favorable. Results from tandem mass spectrometric experiments conducted with deuterium-labeled compounds confirmed that the inter-ring mechanism is the preferred pathway. Furthermore, N-phenyl benzenesulfonamide and its derivatives also undergo a phenyl radical loss to form a radical ion with a mass-to-charge ratio of 155, which is in violation of the so-called "even-electron rule."
In the negative-ion collision-induced dissociation mass spectra of most organic sulfonates, the base peak is observed at m/z 80 for the sulfur trioxide radical anion (SO(3) (-·) ). In contrast, the product-ion spectra of a few sulfonates, such as cysteic acid, aminomethanesulfonate, and 2-phenylethanesulfonate, show the base peak at m/z 81 for the bisulfite anion (HSO(3) (-) ). An investigation with an extensive variety of sulfonates revealed that the presence of a hydrogen atom at the β-position relative to the sulfur atom is a prerequisite for the formation of the bisulfite anion. The formation of HSO(3) (-) is highly favored when the atom at the β-position is nitrogen, or the leaving neutral species is a highly conjugated molecule such as styrene or acrylic acid. Deuterium-exchange experiments with aminomethanesulfonate demonstrated that the hydrogen for HSO(3) (-) formation is transferred from the β-position. The presence of a peak at m/z 80 in the spectrum of 2-sulfoacetic acid, in contrast to a peak at m/z 81 in that of 3-sulfopropanoic acid, corroborated the proposed hydrogen transfer mechanism. For diacidic compounds, such as 4-sulfobutanoic acid and cysteic acid, the m/z 81 ion can be formed by an alternative mechanism, in which the negative charge of the carboxylate moiety attacks the α-carbon relative to the sulfur atom. Experiments conducted with deuterium-exchanged and deuterium-labeled analogs of sulfocarboxylic acids demonstrated that the formation of the bisulfite anion resulted either from a hydrogen transfer from the β-carbon, or from a direct attack by the carboxylate moiety on the α-carbon.
We describe a diagnostic ion that enables rapid semiquantitative evaluation of the degree of oxygen contamination in the collision gases used in tandem mass spectrometers. Upon collision-induced dissociation (CID), the m/z 359 positive ion generated from the analgesic etoricoxib undergoes a facile loss of a methyl sulfone radical [(•)SO(2)(CH(3)); 79-Da] to produce a distonic radical cation of m/z 280. The product-ion spectrum of this m/z 280 ion, recorded under low-energy activation on tandem-in-space QqQ or QqTof mass spectrometers using nitrogen from a generator as the collision gas, or tandem-in-time ion-trap (LCQ, LTQ) mass spectrometers using purified helium as the buffer gas, showed two unexpected peaks at m/z 312 and 295. This enigmatic m/z 312 ion, which bears a mass-to-charge ratio higher than that of the precursor ion, represented an addition of molecular oxygen (O(2)) to the precursor ion. The exceptional affinity of the m/z 280 radical cation towards oxygen was deployed to develop a method to determine the oxygen content in collision gases.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.