A student-prepared silver−silver chloride reference electrode is described. The chemical deposition of AgCl(s) onto Ag(s) is accomplished in 30−50 s by placement of a Ag(s) wire in laundry bleach. An autopipettor tip with an agarose gel plug serves as the electrode housing; the agarose gel contains predissolved KNO 3 . Reference electrode preparation is completed in about 10 min, allowing enough time for laboratory exercises that utilize the electrode. Preparation and operation of the electrode and recovery of the Ag(s) are designed to teach a number of important chemistry principles.
The applicability of a gold-plated iridium Nano-Band array ultramicroelectrode (6 microm by 0.2 microm, 64-microm interspacing, 100 electrode bands) in the analysis of mercury using a portable system is demonstrated by anodic stripping voltammetry in real-life samples. Optimized measurement parameters, 0.1 M HCl electrolyte, plating potential of 0 mV, and staircase scan mode were identified. The dynamic linear range is 10-180 ppb at 5-s deposition time with 1.5 microC of gold plated. The experimental detection limit for Hg2+ in 0.1 M HCl was 0.5 ppb at a deposition time of 4 min and a scan rate of 10 V/s. Real-life samples, such as flue gas exposed samples from flue gas simulators could be analyzed within 5 min using the method of standard additions. We identified a field-portable extraction procedure for soil samples using 1:1 concentrated HNO3/30% H2O2 mixture, compatible with ASV and the iridium electrode. The detection limit for soils is 1 ppm. The results obtained using ASV are in good agreement with reference values using cold vapor atomic absorption for the sample matrixes studied here. To our knowledge, this is the first mercury application using a reusable iridium array ultramicroelectrode. The portable potentiostat is less than 500 g, and together with the portable digestion method, makes the Nano-Band Explorer system field applicable.
The catalyzed H 2 O 2 decomposition reaction is 2H 2 O 2 ðaqÞ sf catalyst 2H 2 OðlÞ þ O 2 ðgÞ (1Þ A procedure to determine the kinetics of the iodide-catalyzed H 2 O 2 decomposition reaction based on water displacement from a wash bottle has been reported by Teggins and Mahaffy (1). In this procedure, the H 2 O 2 and KI reagents totaling 300 mL are mixed and transferred to a wash bottle. As O 2 (g) is generated, some of the reaction solution is displaced. The initial rate of reaction is determined by measuring the time to displace specific volumes. By comparing the initial rates for different runs, the orders of reaction were both found to be 1. Compared to conventional water displacement schemes (2, 3), this approach is attractive because it is easily performed. We have reported a wash bottle water displacement scheme to determine the % NaHCO 3 in an Alka-Seltzer tablet, the molar mass of CO 2 , and the ideal gas constant R (4). Encouraged by the quality of results obtained by students, we have examined the Teggins and Mahaffy (1) wash bottle water displacement scheme and found the following changes to be helpful: (i) Reagents are added to a test tube placed in a water-filled wash bottle so that water is displaced instead of the reaction H 2 O 2 -KI solution. (ii) Small volumes of reagents totaling 5 mL are used. Theory Initial Rate Measurement Based on Volume of O 2 (g)The initial rate is defined asis the volume of the reaction solution in liters (L), and Δt is the displaced water collection time in seconds (s). Considering the equationwhere k is the rate constant, h is the order with respect to H 2 O 2 , and i is the order with respect to I -, the rate constant will have units ofIt is essential to include V(solution) in the definition of initial rate in eq 2 so that the rate constant in eq 4 is applicable to any volume of reaction solution. Initial Rate Measurement Based on Concentration of H 2 O 2Based on H 2 O 2 concentration, the initial rate isThe temperature of the gas in the wash bottle and the room atmospheric pressure (P(atm) = P(O 2 (g)) are measured so that the V(O 2 (g)) can be converted to mol O 2 (g) according to the ideal gas law. Considering the equation initial rate -Δ½H 2 O 2 2Δt ¼ k½H 2 O 2 h ½I -i (7Þ the rate constant will have units of rate constant units ¼ M ð1 -h -iÞ s -1 (8Þ The rate constant for the H 2 O 2 decomposition is conventionally expressed according to eq 8. Order of Reaction with Respect to H 2 O 2 With [I -] fixed and the [H 2 O 2 ] varied from one run to another initial rate ¼ -Δ½H 2 O 2 2Δt ¼ k½I -i ½H 2 O 2 h ¼ k 0 ½H 2 O 2 h (9Þ where k 0 ¼ k½I -i (10Þ The order of the reaction with respect to [H 2 O 2 ] can be
The acid ionization constant, K a , of acetic acid and the base ionization constant, K b , of ammonia are determined easily and rapidly using a datalogger, a pH sensor, and a conductivity sensor. To decrease sample preparation time and to minimize waste, sequential aliquots of a concentrated standard are added to a known volume of water and measurements are made after each addition. In this laboratory exercise, students show that K a and K b are constants, compare and contrast pH and conductivity approaches, and evaluate how solution components (weak acid alone and weak acid plus conjugate base) affect the results.
Using a conductivity sensor, a temperature sensor, and a datalogger, fundamental factors that affect conductivity are explored. These factors are (i) concentration, (ii) temperature, (iii) ion charge, and (iv) size and or mass of anion. In addition, the conductivities of a number of other solutions are measured. This lab has been designed to provide students opportunities to construct knowledge.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.