The use of a helical optics to drill micro holes in fuel injectors and spinning nozzles has already demonstrated great advantages like high precision and flexibility. Due to the laser beam rotation on a helical path, the hole-geometry is almost independent from the beam shape. By slightly manipulating the beam path inside the optics, positive and negative tapered as well as straight cylindrical holes can be achieved. If the work-piece is moved relatively to the helical-optics, a helical-cutting process is performed. Compared to direct cutting technologies, helical-cutting can meet higher requirements in terms of roughness and taper of the kerf. By using a helical optics with ultra-short laser pulses, micro cutting experiments on metal and sapphire sheets were performed. As a result of the laser beam helical movement, the roughness of the cutting kerf in metal is below 1 µm, and a taper less than 1 degree could be achieved with a cutting speed 10 mm/min. Recast layer and heat affected zone around the exits are negligible.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.