No abstract

No abstract

No abstract

In this work, the adsorption of ciprofloxacin onto yam peel biosorbent was studied by batch method. The equilibrium isotherm analysis of the adsorption process was evaluated to provide insight into the removal mechanism. A decrease in the percentage removal (75.0 – 60.8%) and an increase in adsorption capacity (6.0 – 24.3 mg/g) with an increase in ciprofloxacin concentration from 20 – 100 mg/L was obtained. The isotherm was analyzed by the Langmuir, Temkin, Freundlich, and Scatchard models, and the best fit was obtained for the Freundlich model with a R2 of 0.9918. The separation factor in the range of 0.238 – 0.609 and the Freundlich adsorption intensity of 1.492 indicated a favorable adsorption of ciprofloxacin on yam peel. A monolayer adsorption capacity of 42.81 mg/g was obtained for yam peel which was higher than other efficient adsorbents. The Scatchard model gave a linear fit to the uptake data with R2 of 0.9653 and sum square error of 0.008. The isotherm analysis revealed complex adsorption involving multi mechanisms in the overall process. The results of this investigation showed that yam peel could be utilized as an efficient agricultural waste for the adsorption of ciprofloxacin from wastewater.

The utility of Nru clay for industrial application, which was taken from the Nsukka local government area in Enugu State, Nigeria, is assessed in this study for its physical and chemical properties. The clay was investigated chemically which showed SiO 2 51.2%, Al 2 O 3 18.3% as the predominant constituents while other metallic oxides such as Fe 2 O 3 5.3%, MgO 2.2%, Na 2 O 1.8%, CaO 1.4%, K 2 O 1.3% and MnO 0.7% were present in considerable proportion. The physical and mechanical analysis acknowledged a range in the linear shrinkage (4.17 - 6.25%), total shrinkage (7.8 - 10.2%), apparent porosity (36.92 – 26.58%), apparent density (2.59 - 2.37 g/cm3), bulk density (1.63 - 1.74 g/cm3), water absorption (22.64 – 15.33%) and modulus of rupture (6.70 – 9.15 kg/cm2) with an increase in firing temperature from 900°C to 1200°C. Nru clay can withstand heat without melting or deforming at temperature up to 1200 °C and exhibited reasonable plasticity with a modulus of plasticity of 1.42. We can infer from our investigation that Nru clay is a potential raw material for industries in the production of ceramics, high melting clays, fired bricks, and paints. Alternatively, the clays’ properties can be tailored to achieve superior physical and mechanical properties by enhancing them with additives. Therefore, it can be employed to cushion the exorbitant cost of importing clay minerals from other nations.