The potential of using of millimeter wave (mmWave) frequency for future wireless cellular communication systems has motivated the study of large-scale antenna arrays for achieving highly directional beamforming. However, the conventional fully digital beamforming methods which require one radio frequency (RF) chain per antenna element is not viable for large-scale antenna arrays due to the high cost and high power consumption of RF chain components in high frequencies.To address the challenge of this hardware limitation, this paper considers a hybrid beamforming architecture in which the overall beamformer consists of a low-dimensional digital beamformer followed by an RF beamformer implemented using analog phase shifters. Our aim is to show that such an architecture can approach the performance of a fully digital scheme with much fewer number of RF chains. Specifically, this paper establishes that if the number of RF chains is twice the total number of data streams, the hybrid beamforming structure can realize any fully digital beamformer exactly, regardless of the number of antenna elements. For cases with fewer number of RF chains, this paper further considers the hybrid beamforming design problem for both the transmission scenario of a point-to-point multipleinput multiple-output (MIMO) system and a downlink multiuser multiple-input single-output (MU-MISO) system. For each scenario, we propose a heuristic hybrid beamforming design that achieves a performance close to the performance of the fully digital beamforming baseline. Finally, the proposed algorithms are modified for the more practical setting in which only finite resolution phase shifters are available. Numerical simulations show that the proposed schemes are effective even when phase shifters with very low resolution are used.Index Terms-Millimeter wave, large-scale antenna arrays, multiple-input multiple-output (MIMO), multi-user multipleinput single-output (MU-MISO), massive MIMO, linear beamforming, precoding, combining, finite resolution phase shifters.
This paper considers the massive connectivity application in which a large number of potential devices communicate with a base-station (BS) in a sporadic fashion. The detection of device activity pattern together with the estimation of the channel are central problems in such a scenario. Due to the large number of potential devices in the network, the devices need to be assigned non-orthogonal signature sequences. The main objective of this paper is to show that by using random signature sequences and by exploiting sparsity in the user activity pattern, the joint user detection and channel estimation problem can be formulated as a compressed sensing single measurement vector (SMV) problem or multiple measurement vector (MMV) problem, depending on whether the BS has a single antenna or multiple antennas, and be efficiently solved using an approximate message passing (AMP) algorithm. This paper proposes an AMP algorithm design that exploits the statistics of the wireless channel and provides an analytical characterization of the probabilities of false alarm and missed detection by using the state evolution. We consider two cases depending on whether the large-scale component of the channel fading is known at the BS and design the minimum mean squared error (MMSE) denoiser for AMP according to the channel statistics. Simulation results demonstrate the substantial advantage of exploiting the statistical channel information in AMP design; however, knowing the large-scale fading component does not offer tangible benefits. For the multiple-antenna case, we employ two different AMP algorithms, namely the AMP with vector denoiser and the parallel AMP-MMV, and quantify the benefit of deploying multiple antennas at the BS.
Hybrid analog and digital beamforming is a promising candidate for large-scale millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems because of its ability to significantly reduce the hardware complexity of the conventional fully-digital beamforming schemes while being capable of approaching the performance of fully-digital schemes. Most of the prior work on hybrid beamforming considers narrowband channels. However, broadband systems such as mmWave systems are frequency-selective. In broadband systems, it is desirable to design common analog beamformer for the entire band while employing different digital (baseband) beamformers in different frequency sub-bands. This paper considers the hybrid beamforming design for systems with orthogonal frequency division multiplexing (OFDM) modulation. First, for a single-user MIMO (SU-MIMO) system where the hybrid beamforming architecture is employed at both transmitter and receiver, we show that hybrid beamforming with a small number of radio frequency (RF) chains can asymptotically approach the performance of fully-digital beamforming for a sufficiently large number of transceiver antennas due to the sparse nature of the mmWave channels. For systems with a practical number of antennas, we then propose a unified heuristic design for two different hybrid beamforming structures, the fully-connected and the partiallyconnected structures, to maximize the overall spectral efficiency of a mmWave MIMO system. Numerical results are provided to show that the proposed algorithm outperforms the existing hybrid beamforming methods and for the fully-connected architecture the proposed algorithm can achieve spectral efficiency very close to that of the optimal fully-digital beamforming but with much fewer RF chains. Second, for the multiuser multiple-input singleoutput (MU-MISO) case, we propose a heuristic hybrid percoding design to maximize the weighted sum rate in the downlink and show numerically that the proposed algorithm with practical number of RF chains can already approach the performance of fully-digital beamforming.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.