BackgroundDue to the increased emergence of antimicrobial resistance, alternatives to minimize the usage of antibiotics become attractive solutions. Biophysical manipulation of material surface topography to prevent bacterial adhesion is one promising approach. To this end, it is essential to understand the relationship between surface topographical features and bactericidal properties in order to develop antibacterial surfaces.ResultsIn this work a systematic study of topographical effects on bactericidal activity of nanostructured surfaces is presented. Nanostructured Ormostamp polymer surfaces are fabricated by nano-replication technology using nanoporous templates resulting in 80-nm diameter nanopillars. Six Ormostamp surfaces with nanopillar arrays of various nanopillar densities and heights are obtained by modifying the nanoporous template. The surface roughness ranges from 3.1 to 39.1 nm for the different pillar area parameters. A Gram-positive bacterium, Staphylococcus aureus, is used as the model bacterial strain. An average pillar density at ~ 40 pillars μm−2 with surface roughness of 39.1 nm possesses the highest bactericidal efficiency being close to 100% compared with 20% of the flat control samples. High density structures at ~ 70 pillars μm−2 and low density structures at < 20 pillars μm−2 with surface roughness smaller than 20 nm reduce the bactericidal efficiency to almost the level of the control samples.ConclusionThe results obtained here suggests that the topographical effects including pillar density and pillar height inhomogeneity may have significant impacts on adhering pattern and stretching degree of bacterial cell membrane. A biophysical model is prepared to interpret the morphological changes of bacteria on these nanostructures.Electronic supplementary materialThe online version of this article (10.1186/s12951-018-0347-0) contains supplementary material, which is available to authorized users.

We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was <1% of that from flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.

Hospital-acquired infections can cause serious complications and are a severe problem because of the increased emergence of antibiotic-resistant bacteria. Biophysical modification of the material surfaces to prevent or reduce bacteria adhesion is an attractive alternative to antibiotic treatment. Since stainless steel is a widely used material for implants and in hospital settings, in this work, we used stainless steel to investigate the effect of the material surface topographies on bacterial adhesion and early biofilm formation. Stainless steel samples with different surface roughnesses Rq in a range of 217.9–56.6 nm (Ra in a range of 172.5–45.2 nm) were fabricated via electropolishing and compared for adhesion of bacterial pathogens Pseudomonas aeruginosa and Staphylococcus aureus. It was found that the number of viable cells on the untreated rough surface was at least 10-fold lower than those on the electropolished surfaces after 4 h of incubation time for P. aeruginosa and 15-fold lower for S. aureus. Fluorescence images and scanning electron microscopy images revealed that the bacterial cells tend to adhere individually as single cells on untreated rough surfaces. In contrast, clusters of the bacterial cells (microcolonies) were observed on electropolished smooth surfaces. Our study demonstrates that nanoscale surface roughness can play an important role in restraining bacterial adhesion and formation of microcolonies.

Antimicrobial resistance in microorganisms will cause millions of deaths and pose a vast burden on health systems; therefore, alternatives to existing small-molecule antibiotics have to be developed. Lysozyme is an antimicrobial enzyme and has broad-spectrum antimicrobial activity in different aggregated forms. Here, we propose a reductive pathway to obtain colloidally stable amyloidlike worm-shaped lysozyme nanoparticles (worms) from hen egg white lysozyme (HEWL) and compare them to amyloid fibrils made in an acid hydrolysis pathway. The aggregation of HEWL into worms follows strongly pH-dependent kinetics and induces a structural transition from α-helices to β-sheets. Both HEWL worms and amyloid fibrils show broad-spectrum antimicrobial activity against the bacteria Staphylococcus aureus (Gram-positive), Escherichia coli (Gram-negative), and the fungus Candida albicans. The colloidal stability of the worms allows the determination of minimum inhibitory concentrations, which are lower than that for native HEWL in the case of S. aureus. Overall, amyloid fibrils have the strongest antimicrobial effect, likely due to the increased positive charge compared to native HEWL. The structural and functional characterizations of HEWL worms and amyloids investigated herein are critical for understanding the detailed mechanisms of antimicrobial activity and opens up new avenues for the design of broad-spectrum antimicrobial materials for use in various applications.

Progressive antibiotic resistance is a serious condition adding to the challenges associated with skin wound treatment, and antibacterial wound dressings with alternatives to antibiotics are urgently needed. Cellulose‐based membranes are increasingly considered as wound dressings, necessitating further functionalization steps. A bifunctional peptide, combining an antimicrobial peptide (AMP) and a cellulose binding peptide (CBP), is designed. AMPs affect bacteria via multiple modes of action, thereby reducing the evolutionary pressure selecting for antibiotic resistance. The bifunctional peptide is successfully immobilized on cellulose membranes of bacterial origin or electrospun fibers of plant‐derived cellulose, with tight control over peptide concentrations (0.2 ± 0.1 to 4.6 ± 1.6 µg mm−2). With this approach, new materials with antibacterial activity against Staphylococcus aureus (log4 reduction) and Pseudomonas aeruginosa (log1 reduction) are developed. Furthermore, membranes are cytocompatible in cultures of human fibroblasts. Additionally, a cell adhesive CBP‐RGD peptide is designed and immobilized on membranes, inducing a 2.2‐fold increased cell spreading compared to pristine cellulose. The versatile concept provides a toolbox for the functionalization of cellulose membranes of different origins and architectures with a broad choice in peptides. Functionalization in tris‐buffered saline avoids further purification steps, allowing for translational research and multiple applications outside the field of wound dressings.

Titanium (Ti)-based implants are broadly applied in the medical field, but their related infections can lead to implant failure. Photo-irradiation of metal materials to generate antimicrobial agents, an alternative to antibiotics, is a promising method to reduce bacterial infection and antibiotic usage. It is therefore important to understand how bacterial pathogens respond to Ti surfaces. Here, Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus, the most prevalent pathogens linked to healthcare-associated infections, were used as model strains. Two different kinds of Ti surfaces respectively stored in dry condition and 0.9 % NaCl solution were applied. Upon UV irradiation and in the absence of bacteria, both tested surfaces exhibited similar bactericidal activity, even though the surfaces stored in 0.9 % NaCl solution generated a slightly higher level of reactive oxygen species (ROS). Interestingly, P. aeruginosa and S. aureus responded to the irradiated Ti surfaces differently regarding interaction time: the number of viable P. aeruginosa was reduced up to 90 % after 30 min interaction with the treated surfaces compared to the untreated ones, but this reduction is lessened to 69 %-81 % after 240 min. By contrast, UV treatment of surfaces did not impact the viability of S. aureus after 30 min interaction, however, led to more than 99 % reduction after 240 min incubation. These results provide first experimental evidence that Gram negative and positive bacterial species respond to ROS with different inactivation kinetics. This work also demonstrated that treatment with photo-irradiation in the absence of bacteria conferred Ti surfaces with efficient bactericidal activity.

To avoid excessive usage of antibiotics and antimicrobial agents, smart wound dressings permitting controlled drug release for treatment of bacterial infections are highly desired. In search of a sensitive stimulus to activate drug release under physiological conditions, we found that the glass transition temperature (T g ) of a polymer or polymer blend can be an ideal parameter because a thermal stimulus can regulate drug release at the physiological temperature of 37 °C. A well-tuned T g for a controlled drug release from fibers at 37 °C was achieved by varying the blending ratio of Eudragit® RS 100 and poly(methyl methacrylate). Octenidine, an antimicrobial agent often used in wound treatment, was encapsulated into the polymer blend during the electrospinning process and evaluated for its controlled release based on modulation of temperature. The thermal switch of the nanofibrous membranes can be turned "on" at physiological temperature (37 °C) and "off" at room temperature (25 °C), conferring a controlled release of octenidine. It was found that octenidine can be released in an amount at least 8.5 times higher (25 mg•L −1 ) during the "on" stage compared to the "off" stage after 24 h, which was regulated by the wet T g (34.8−36.5 °C). The "on"/"off" switch for controlled drug release can moreover be repeated at least 5 times. Furthermore, the fabricated nanofibrous membranes displayed a distinctive antibacterial activity, causing a log3 reduction of the viable cells for both Gram negative and positive pathogens at 37 °C, when the thermal switch was "on". This study forms the groundwork for a treatment concept where no external stimulus is needed for the release of antimicrobials at physiological conditions, and will help reduce the overuse of antibiotics by allowing controlled drug release.

To achieve effective long-term disinfection of the root canals, we synthesized core-shell silver nanoparticles (AgNPs@SiO) and used them to develop two irrigation solutions containing sodium phytate (SP) and ethylene glycol-bis(β-aminoethyl ether)N,N,N',N'-tetraacetic acid (EGTA), respectively. Ex vivo studies with instrumented root canals revealed that the developed irrigation solutions can effectively remove the smear layer from the dentinal surfaces. Further in vitro experiments with single- and multispecies biofilms demonstrated for the first time that AgNPs@SiO-based irrigation solutions possess excellent antimicrobial activities for at least 7 days, whereas the bare AgNPs lose the activity almost immediately and do not show any antibacterial activity after 2 days. The long-term antimicrobial activity exhibited by AgNPs@SiO solutions can be attributed to the sustainable availability of soluble silver, even after 7 days. Both solutions showed lower cytotoxicity toward human gingival fibroblasts compared to the conventionally used solution (3% NaOCl and 17% EDTA). Irrigation solutions containing AgNP@SiO may therefore be highly promising for applications needing a long-term antimicrobial effect.