No abstract

No abstract

Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements that such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. As the final contribution, we identify a number of open research challenges and outline several potential future research directions.

Practical location estimation is never ideal, and each location estimate is burdened with a certain level of error. In many use-case scenarios, knowing the magnitude of these errors can significantly improve the usability of the location estimates. The localization errors for different localization approaches are currently assessed using static performance benchmarks. These benchmarks typically provide aggregate metrics that statistically characterize the localization errors across the entire deployment environment. Due to the potentially dynamic nature and spatial heterogeneity of the environment, this characterization can be too generic to be really useful from the point of view of an individual location estimate. To address this issue for fingerprinting-based localization, we propose a regression-based procedure for estimating the individual (i.e., per-location estimate) localization errors. We use the received signal strength (RSS) values from various locations in an environment, as well as the observed localization errors in case the location estimates are generated using these RSS values, for training a number of contemporary regression models. Using the trained models, we are able to estimate the localization error of a location estimate at a new location using only RSS values collected at that location. Both by simulation and experimentally, we demonstrate the feasibility of the proposed procedure for Wi-Fi-based indoor and LoRa-and SigFoxbased outdoor fingerprinting approaches. We do that by showing that the proposed procedure can, in the best-case scenario, yield more than 50% more accurate estimation than the reference procedure based on the average localization errors derived from the static performance benchmarks.

BackgroundThe combination of an aging population and nursing staff shortages implies the need for more advanced systems in the healthcare industry. Many key enablers for the optimization of healthcare systems require provisioning of location awareness for patients (e.g. with dementia), nurses, doctors, assets, etc. Therefore, many Indoor Positioning Systems (IPSs) will be indispensable in healthcare systems. However, although many IPSs have been proposed in literature, most of these have been evaluated in non-representative environments such as office buildings rather than in a hospital.MethodsTo remedy this, the paper evaluates the performance of existing IPSs in an operational modern healthcare environment: the “Sint-Jozefs kliniek Izegem” hospital in Belgium. The evaluation (data-collecting and data-processing) is executed using a standardized methodology and evaluates the point accuracy, room accuracy and latency of multiple IPSs. To evaluate the solutions, the position of a stationary device was requested at 73 evaluation locations. By using the same evaluation locations for all IPSs the performance of all systems could objectively be compared.ResultsSeveral trends can be identified such as the fact that Wi-Fi based fingerprinting solutions have the best accuracy result (point accuracy of 1.21 m and room accuracy of 98 %) however it requires calibration before use and needs 5.43 s to estimate the location. On the other hand, proximity based solutions (based on sensor nodes) are significantly cheaper to install, do not require calibration and still obtain acceptable room accuracy results.ConclusionAs a conclusion of this paper, Wi-Fi based solutions have the most potential for an indoor positioning service in case when accuracy is the most important metric. Applying the fingerprinting approach with an anchor installed in every two rooms is the preferred solution for a hospital environment.

Widespread adoption of indoor positioning systems based on WiFi fingerprinting is at present hindered by the large efforts required for measurements collection during the offline phase. Two approaches were recently proposed to address such issue: crowdsourcing and RSS radiomap prediction, based on either interpolation or propagation channel model fitting from a small set of measurements. RSS prediction promises better positioning accuracy when compared to crowdsourcing, but no systematic analysis of the impact of system parameters on positioning accuracy is available. This paper fills this gap by introducing ViFi, an indoor positioning system that relies on RSS prediction based on Multi-Wall Multi-Floor (MWMF) propagation model to generate a discrete RSS radiomap (virtual fingerprints). Extensive experimental results, obtained in multiple independent testbeds, show that ViFi outperforms virtual fingerprinting systems adopting simpler propagation models in terms of accuracy, and allows a sevenfold reduction in the number of measurements to be collected, while achieving the same accuracy of a traditional fingerprinting system deployed in the same environment. Finally, a set of guidelines for the implementation of ViFi in a generic environment, that saves the effort of collecting additional measurements for system testing and fine tuning, is proposed.

No abstract

The experimental efforts for optimizing the performance of RF-based indoor localization algorithms for specific environments and scenarios is time consuming and costly. In this work, we address this problem by providing a publicly accessible platform for streamlined experimental evaluation of RF-based indoor localization algorithms, without the need of a physical testbed infrastructure. We also offer an extensive set of raw measurements that can be used as input data for indoor localization algorithms. The datasets are collected in multiple testbed environments, with various densities of measurement points, using different measuring devices and in various scenarios with controlled RF interference. The platform encompasses two core services: one focused on storage and management of raw data, and one focused on automated calculation of metrics for performance characterization of localization algorithms. Tools for visualization of the raw data, as well as software libraries for convenient access to the platform from MATLAB and Python, are also offered. By contrasting its fidelity and usability with respect to remote experiments on dedicated physical testbed infrastructure, we show that the virtual platform produces comparative performance results while offering significant reduction in the complexity, time and labor overheads.