1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 2 angle and the mean interfacial shear strength. The contributions of the matrix, the subcritical and the supercritical fibers to the tensile strength of the composite material were also computed.

No abstract

No abstract

Most of the decisions taken during the early design and development steps of a new product compromise a large part of its cost, including its environmental footprint and energy consumption. This is of special interest for the automotive industry that has made an effort to increase its sustainability. Adjectives like bio-based, recyclable or biodegradable are commonly used as synonyms of greener; nonetheless, such materials must achieve the requirements of the industry. This paper researches the use of alternative materials instead of glass fiber reinforced polypropylene, a commodity material. The authors propose using a wood fiber reinforced polyamide 11 composite as replacement. The research discussed the mechanical properties of such composites, obtaining values similar to the currently used materials. Moreover, a case study was performed to assess the behavior of the composites when used to manufacture a door car handle. The materials with reinforcement contents ranging from 40 to 60% showed its ability to replace the commodity materials. Furthermore, a preliminary LCA analysis was performed to evaluate the environmental footprint of the researched materials. In was found, that, in terms of energy and carbon footprint, the PA11 composites were penalized by the energy cost of the PA11 monomer production.

No abstract

Packaging consumes around 40% of the total plastic production. One of the most important fields with high requirements is food packaging. Food packaging products have been commonly produced with petrol polymers, but due to environmental concerns, the market is being moved to biopolymers. Poly (lactic acid) (PLA) is the most promising biopolymer, as it is bio-based and biodegradable, and it is well established in the market. Nonetheless, its barrier properties need to be enhanced to be competitive with other polymers such as polyethylene terephthalate (PET). Nanoclays improve the barrier properties of polymeric materials if correct dispersion and exfoliation are obtained. Thus, it marks a milestone to obtain an appropriate dispersion. A predispersed methodology is proposed as a compounding process to improve the dispersion of these composites instead of common melt procedures. Afterwards, the effect of the polarity of the matrix was analyzing using polar and surface modified nanoclays with contents ranging from 2 to 8% w/w. The results showed the suitability of the predispersed and concentrated compound, technically named masterbatch, to obtain intercalated structures and the higher dispersion of polar nanoclays. Finally, the mechanical performance and sustainability of the prepared materials were simulated in a food tray, showing the best assessment of these materials and their lower fingerprint.

a This paper deals with the product design, engineering, and material selection intended for the manufacturing of an eco-friendly chair. The final product is expected to combine design attributes with technical and legal feasibility with the implementation of new bio-based materials. Considering the industrial design, a range of objectives and trends were determined after setting the market requirements, and the final concept was proposed and modeled. The product geometry, production technology, and legal specifications were the input data for product engineering. The material selection was based on the technical requirements. Polypropylene (PP) composite materials based on coupled-fiberglass, sized-fiberglass, and coupled-stone ground wood reinforcements were prepared and characterized. Final formulations based on these PP composites are proposed and justified.

No abstract