No abstract

In view of enhanced oil recovery, the adsorption behavior of surfactants is usually monitored on smooth model rock surfaces using quartz crystal microbalance with dissipation (QCM-D). However, this is an impractical situation as the effect of the surface roughness of reservoir rocks and its role in surfactant adsorption processes are not yet completely understood. The coupling of electrochemical techniques and QCM-D in one analysis setup (EQCM-D) provides a new methodology to explore complex surfactant adsorption processes. In this work, a uniform, rough, and well-covered model CaCO 3 surface was obtained on gold and platinum sensors to model carbonate rocks. This was achieved by the electrochemically formed hydroxide ions in the presence of bicarbonate and calcium ions, by which the controlled deposition of CaCO 3 resulted in sensor surface coverages in the range 35− 40%. Before using the deposited CaCO 3 surfaces, the adsorption of anionic surfactant alcohol alkoxy sulfate (AAS) on a smooth commercially available CaCO 3 surface was studied with varying CaCl 2 concentrations. For the first time, the structure and characteristics of the formed AAS layer were quantitatively described, indicating the formation of an incomplete bilayer. Compared to the smooth CaCO 3 surface, an increase in the frequency shift from 5 to 15 times was observed in sensors covered with rough CaCO 3 deposit. This observation was primarily attributed to the rougher surfaces that possess more adsorption sites for AAS binding and also to the effect of liquid trapping, inducing additional frequency shifts. The obtained results show that surfactant adsorption on rough surfaces was vastly different from that on smooth surfaces, and they provide a better understanding of the adsorption behavior of surfactants to mineral surfaces.

No abstract

Development of high-performance materials for the capture and separation of CO2 from the gas mixture is significant to alleviate carbon emission and mitigate the greenhouse effect. In this work, a novel structure of C9N7 slit was developed to explore its CO2 adsorption capacity and selectivity using Grand Canonical Monte Carlo (GCMC) and Density Functional Theory (DFT) calculations. Among varying slit widths, C9N7 with the slit width of 0.7 nm exhibited remarkable CO2 uptake with superior CO2/N2 and CO2/CH4 selectivity. At 1 bar and 298 K, a maximum CO2 adsorption capacity can be obtained as high as 7.06 mmol/g, and the selectivity of CO2/N2 and CO2/CH4 was 41.43 and 18.67, respectively. In the presence of H2O, the CO2 uptake of C9N7 slit decreased slightly as the water content increased, showing better water tolerance. Furthermore, the underlying mechanism of highly selective CO2 adsorption and separation on the C9N7 surface was revealed. The closer the adsorption distance, the stronger the interaction energy between the gas molecule and the C9N7 surface. The strong interaction between the C9N7 nanosheet and the CO2 molecule contributes to its impressive CO2 uptake and selectivity performance, suggesting that the C9N7 slit could be a promising candidate for CO2 capture and separation.

No abstract