Wearable and stretchable electronics including various conductors and sensors are featured with their lightweight, high flexibility, and easy integration into functional devices or textiles. However, most flexible electronic materials are still unsatisfactory due to their poor recoverability under large strain. Herein, we fabricated a carbon nanotubes (CNTs) and polyurethane (PU) nanofibers composite helical yarn with electrical conductivity, ultrastretchability, and high stretch sensitivity. The synergy of elastic PU molecules and springlike microgeometry enable the helical yarn excellent stretchability, while CNTs are stably winding-locked into the yarn through a simple twisting strategy, making good conductivity. By virtue of the interlaced conductive network of CNTs in microlevel and the helical structure in macrolevel, the CNTs/PU helical yarn achieves good recoverability within 900% and maximum tensile elongation up to 1700%. With these features, it can be used as a superelastic and highly stable conductive wire. Moreover, it also can monitor the human motion as a rapid-response strain sensor by adjusting the content of the CNTs simply. This general and low-cost strategy is of great promise for ultrastretchable wearable electronics and multifunctional devices.

Smart regulation of substance permeability through porous membranes is highly desirable for membrane applications. Inspired by the stomatal closure feature of plant leaves at relatively high temperature, here we report a nano-gating membrane with a negative temperature-response coefficient that is capable of tunable water gating and precise small molecule separation. The membrane is composed of poly(N-isopropylacrylamide) covalently bound to graphene oxide via free-radical polymerization. By virtue of the temperature tunable lamellar spaces of the graphene oxide nanosheets, the water permeance of the membrane could be reversibly regulated with a high gating ratio. Moreover, the space tunability endows the membrane with the capability of gradually separating multiple molecules of different sizes. This nano-gating membrane expands the scope of temperature-responsive membranes and has great potential applications in smart gating systems and molecular separation.

The separation of organic liquid mixtures is achieved by Cu(OH) nanoneedle-covered copper mesh based on the difference of the liquid surface tension. The as-prepared membrane allows the penetration of organic liquid with smaller surface tension and blocks the higher. Thus, the effective separation of these two organic liquids can be achieved.

A superhydrophobic/superhydrophilic dual-membrane separation system has been designed based on an opposite and complementary combination to achieve a high-flux, high-efficiency, continuous oil/water separation.

A bio-inspired three-layer vascular graft with strong mechanical properties and good cell biocompatibility was fabricated by electrospinning. It will play an important role in vessel remodeling and regeneration.

Highly efficient, high-flux emulsion separation by using a Co3O4 nano-needle mesh not only for neutral emulsions but also for strong alkali and high-concentration salt emulsions.

Development of microtissues that possess mechanical properties mimicking those of native stretchable tissues, such as muscle and tendon, is in high demand for tissue engineering and regenerative medicine. However, regardless of the significant advances in synthetic biomaterials, it remains challenging to fabricate living microtissue with high stretchability because application of large strains to microtissues can damage the cells by rupturing their structures. Inspired by the hierarchical helical structure of native fibrous tissues and its behavior of nonaffine deformation, we develop a highly stretchable and tough microtissue fiber made up of a hierarchical helix yarn scaffold, scaling from nanometers to millimeters, that can overcome this limitation. This microtissue can be stretched up to 15 times its initial length and has a toughness of 57 GJ m−3. More importantly, cells grown on this scaffold maintain high viability, even under severe cyclic strains (up to 600%) that can be attributed to the nonaffine deformation under large strains, mimicking native biopolymer scaffolds. Furthermore, as proof of principle, we demonstrate that the nanotopography of the helical nanofiber yarn is able to induce cytoskeletal alignment and nuclear elongation, which promote myogenic differentiation of mesenchymal stem cells by triggering nuclear translocation of transcriptional coactivator with PDZ-binding motif (TAZ). The highly stretchable microtissues we develop here will facilitate a variety of tissue engineering applications and the development of engineered living systems.

Cells are trapped: The 3D fibrous interfaces, including microfibers, nanofibers, and nanofibers/microbeads composite interfaces, are fabricated by electrospinning. After coated with anti-EpCAM, these 3D fibrous interfaces allow cancer cells to be firmly trapped into the networks that show the outstanding capability for cancer cell capture from real blood.