SummaryDue to the rising global environment protection awareness, recycling strategies that comply with the circular economy principles are needed. Polyesters are among the most used materials in the textile industry; therefore, achieving a complete poly(ethylene terephthalate) (PET) hydrolysis in an environmentally friendly way is a current challenge. In this work, a chemo‐enzymatic treatment was developed to recover the PET building blocks, namely terephthalic acid (TA) and ethylene glycol. To monitor the monomer and oligomer content in solid samples, a Fourier‐transformed Raman method was successfully developed. A shift of the free carboxylic groups (1632 cm−1) of TA into the deprotonated state (1604 and 1398 cm−1) was observed and bands at 1728 and 1398 cm−1 were used to assess purity of TA after the chemo‐enzymatic PET hydrolysis. The chemical treatment, performed under neutral conditions (T = 250 °C, P = 40 bar), led to conversion of PET into 85% TA and small oligomers. The latter were hydrolysed in a second step using the Humicola insolens cutinase (HiC) yielding 97% pure TA, therefore comparable with the commercial synthesis‐grade TA (98%).
Poly(ethylene 2,5-furanoate) (PEF) is arousing great interest as a biobased alternative to plastics like poly(ethylene terephthalate) (PET) due to its wide range of potential applications, such as food and beverage packaging, clothing, and in the car industry. In the present study, the hydrolysis of PEF powders of different molecular masses (M n = 55, M w = 104 kg/mol and M n = 18, M w = 29 kg/mol) and various particle sizes (180 < d and 180 < d < 425 µm) using cutinase 1 from Thermobifida cellulosilytica (Thc_cut1) was studied. Thereby, the effects of molecular mass, particle size and crystallinity on enzymatic hydrolysis were investigated. The results show that particles with lower molecular mass are hydrolyzed faster than those with higher masses, and that the higher the molecular mass, the lower the influence of the particle size on the hydrolysis. Furthermore, cutinases from Humicola insolens (HiC) and Thc_cut1 were compared with regard to their hydrolytic activity on amorphous PEF films (measured as release of 2,5-furandicarboxylic acid (FDCA) and weight loss) in different reaction media (1 M KPO pH 8, 0.1 M Tris-HCl pH 7) and at different temperatures (50 • C and 65 • C). A 100% hydrolysis of the PEF films was achieved after only 72 h of incubation with a HiC in 1 M KPO pH 8 at 65 • C. Moreover, the hydrolysis reaction was monitored by LC/TOF-MS analysis of the released reaction products and by Scanning Electron Microscopy (SEM) examination of the polymer surfaces. Enzymatic hydrolysis of PEF with Thc_cut1 and HiC has potential for use in surface functionalization and recycling purposes.
Certain α/β hydrolases have the ability to hydrolyze synthetic polyesters. While their partial hydrolysis has a potential for surface functionalization, complete hydrolysis allows recycling of valuable building blocks. Although knowledge about biodegradation of these materials is important regarding their fate in the environment, it is currently limited to aerobic organisms. A lipase from the anaerobic groundwater organism Pelosinus fermentans DSM 17108(PfL1) was cloned and expressed in Escherichia coli BL21-Gold (DE3) and purified from the cell extract. Biochemical characterization with small substrates showed thermoalkalophilic properties (Topt=50 °C, pHopt=7.5) and higher activity towards para-nitrophenyl octanoate (12.7 U mg(-1)) compared to longer and shorter chain lengths (C14 0.7 U mg(-1) and C2 4.3 U mg(-1), respectively). Crystallization and determination of the 3-D structure displayed the presence of a lid structure and a zinc ion surrounded by an extra domain. These properties classify the enzyme into the I.5 lipase family. PfL1 is able to hydrolyze poly(1,4-butylene adipate-co-terephthalate) (PBAT) polymeric substrates. The hydrolysis of PBAT showed the release of small building blocks as detected by liquid chromatography mass spectrometry (LC-MS). Protein dynamics seem to be involved with lid opening for the hydrolysis of PBAT by PfL1.
Interfacing the surface of an organic semiconductor with biological elements is a central quest when it comes to the development of efficient organic bioelectronic devices. Here, we present the first example of “clickable” organic electrochemical transistors (OECTs). The synthesis and characterization of an azide-derivatized EDOT monomer (azidomethyl-EDOT, EDOT-N3) are reported, as well as its deposition on Au-interdigitated electrodes through electropolymerization to yield PEDOT-N3-OECTs. The electropolymerization protocol allows for a straightforward and reliable tuning of the characteristics of the OECTs, yielding transistors with lower threshold voltages than PEDOT-based state-of-the-art devices and maximum transconductance voltage values close to 0 V, a key feature for the development of efficient organic bioelectronic devices. Subsequently, the azide moieties are employed to click alkyne-bearing molecules such as redox probes and biorecognition elements. The clicking of an alkyne-modified PEG4-biotin allows for the use of the avidin–biotin interactions to efficiently generate bioconstructs with proteins and enzymes. In addition, a dibenzocyclooctyne-modified thrombin-specific HD22 aptamer is clicked on the PEDOT-N3-OECTs, showing the application of the devices toward the development of organic transistors-based biosensors. Finally, the clicked OECTs preserve their electronic features after the different clicking procedures, demonstrating the stability and robustness of the fabricated transistors.
In Europe, most of the discarded and un-wearable textiles are incinerated or landfilled. In this study, we present an enzyme-based strategy for the recovery of valuable building blocks from mixed textile waste and blends as a circular economy concept. Therefore, model and real textile waste were sequentially incubated with (1) protease for the extraction of amino acids from wool components (95% efficiency) and (2) cellulases for the recovery of glucose from cotton and rayon constituents (85% efficiency). The purity of the remaining poly(ethylene terephthalate) (PET) unaltered by the enzymatic treatments was assessed via Fourier-transformed infrared spectroscopy. Amino acids recovered from wool were characterized via elementary and molecular size analysis, while the glucose resulting from the cotton hydrolysis was successfully converted into ethanol by fermentation with Saccharomyces cerevisiae. This work demonstrated that the step-wise application of enzymes can be used for the recovery of pure building blocks (glucose) and their further reuse in fermentative processes.
The growing pollution of the environment with plastic debris is a global threat which urgently requires biotechnological solutions. Enzymatic recycling not only prevents pollution but also would allow recovery of valuable building blocks. Therefore, we explored the existence of microbial polyesterases in microbial communities associated with the Sphagnum magellanicum moss, a key species within unexploited bog ecosystems. This resulted in the identification of six novel esterases, which were isolated, cloned, and heterologously expressed in Escherichia coli. The esterases were found to hydrolyze the copolyester poly(butylene adipate-co-butylene terephthalate) (PBAT) and the oligomeric model substrate bis[4-(benzoyloxy)butyl] terephthalate (BaBTaBBa). Two promising polyesterase candidates, EstB3 and EstC7, which clustered in family VIII of bacterial lipolytic enzymes, were purified and characterized using the soluble esterase substrate p-nitrophenyl butyrate (K m values of 46.5 and 3.4 M, temperature optima of 48°C and 50°C, and pH optima of 7.0 and 8.5, respectively). In particular, EstC7 showed outstanding activity and a strong preference for hydrolysis of the aromatic ester bond in PBAT. Our study highlights the potential of plant-associated microbiomes from extreme natural ecosystems as a source for novel hydrolytic enzymes hydrolyzing polymeric compounds.IMPORTANCE In this study, we describe the discovery and analysis of new enzymes from microbial communities associated with plants (moss). The recovered enzymes show the ability to hydrolyze not only common esterase substrates but also the synthetic polyester poly(butylene adipate-co-butylene terephthalate), which is a common material employed in biodegradable plastics. The widespread use of such synthetic polyesters in industry and society requires the development of new sustainable technological solutions for their recycling. The discovered enzymes have the potential to be used as catalysts for selective recovery of valuable building blocks from this material.
For many years, lipase B from Candida antarctica (CaLB) was the primary biocatalyst used for enzymatic esterification and polycondensation reactions. More recently, the need for novel biocatalysts with different selectivity has arisen in the biotechnology and biocatalysis fields. The present work describes how the catalytic potential of Thermobifida cellulosilytica cutinase 1 (Thc_Cut1) was exploited for polyester synthesis. In a first step, Thc_Cut1 was immobilized on three different carriers, namely Opal, Coral, and Amber, using a novel non-toxic His-tag method based on chelated Fe(III) ions (>99% protein bounded). In a second step, the biocatalyzed synthesis of an array of aliphatic polyesters was conducted. A selectivity chain study in a solvent-free reaction environment showed how, in contrast to CaLB, Thc_Cut1 presents a certain preference for C -C ester-diol combinations reaching monomer conversions up to 78% and M of 878 g mol when the Amber immobilized Thc_Cut1 was used. The synthetic potential of this cutinase was also tested in organic solvents, showing a marked activity decrease in polar media like that observed for CaLB. Finally, recyclability studies were performed, which showed an excellent stability of the immobilized Thc_Cut1 (retained activity >94%) over 24 h reaction cycles when a solvent-free workup was used. Concerning a practical application of the biocatalyst's preparation, the production of oligomers with M values below 10 kDa is usually desired for the production of nanoparticles and for the synthesis of functional pre-polymers for coating applications that can be crosslinked in a second reaction step.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.