Nodular cast irons are widely adopted in off-highway vehicles, since they allow to obtain components with complex shapes as well as good mechanical properties. However, the fatigue strength of such components is a major issue, which is typically addressed by adopting the strain-life approach, since it considers the local strains at stress concentrators where fatigue cracks are prone to initiate. In the fatigue design of off-highway components, the detrimental effect of casting skin, due to both surface and subsurface features, must be accounted for in all cases where machining is not needed. Moreover, the local strain ratio at stress raisers can be different from the nominal one due to forward plasticity. In this paper, static tensile as well as strain-controlled fatigue tests have been executed on specimens taken from real EN-GJS-450-10 off-highway axles. Static tensile tests have been performed on specimens with machined surfaces, while fatigue tests at a strain ratio equal to −1 have been carried out on specimens with surfaces in both machined and as-cast conditions. In addition, machined specimens have been tested at strain ratios equal to 0.1 and 0.5 to investigate the material sensitivity to the mean strain. Finally, the high-cycle downgrading effect of the casting skin has been evaluated, and experimental data of machined specimens tested at different strain ratios have been summarized by using the Smith–Watson–Topper expression.
In the framework of the fatigue assessment of welded components, several methods are available in design standards such as the nominal stress, hot-spot stress, notch stress and linear elastic fracture mechanics approaches. The present paper aims at comparing two advanced local approaches for the fatigue strength assessment of different welded joints made of steel. The first one is IBESS which is based on short crack fracture mechanics. The second one is the PSM which instead involves the strain energy density approach. Both methods will be briefly presented, and the fatigue life prediction results discussed. The results obtained for the joint geometries considered in this work show advantages and drawbacks of the approaches, which are thoroughly analysed as well.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.