Penggunaan daya listrik di rumah tangga selama ini hanya dapat dilihat melalui alat ukur kWh meter yang didistribusikan oleh PLN. Penggunaan alat tersebut tidak memberikan informasi tentang berapa besar daya listrik yang digunakan secara real-time. kWh meter hanya menunjukkan jumlah daya kumulatif yang terpakai. Oleh karena itu, diperlukan alat yang dapat memperlihatkan penggunaan daya listrik secara real-time, sehingga memudahkan penggunauntuk memantau konsumsi energi listrik. Tujuan penelitian adalah memonitoring beban listrik rumah tangga menggunakan arduino NodeMCU ESP8266 secara real-time. Metode yang digunakan dalam penelitian ini terdiri dari 4 tahapan, yaitu : 1). Pemilihan peralatan software dan hardware, 2). Perancangan sistem, 3). Pembuatan program, dan 4). Pengujian alat. Hasil dari pengujian alat menggunakan beban induktif berupa lampu LED 15 Watt sebanyak 2 buah dan beban resistif berupa setrika listrik yang diset pada titik panas maksimum, alat bekerja dengan baik dan mampu membaca besaran arus dan daya yang digunakan pada saat pengkondisian ON terhadap beban induktif dan beban resistif, tingkat akurasi alat dalam membaca berkisar 96% sampai dengan 98%.
Load balancing merupakan teknik untuk mendistribusikan beban trafik pada dua atau lebih jalur koneksi secara seimbang, agar trafik dapat berjalan optimal, memaksimalkan throughput, memperkecil waktu tanggap dan menghindari overload pada salah satu jalur koneksi. Pemilihan Per Connection Clasifier (PCC) load balancing dikarenakan metode tersebut dapat meningkatkan kecepatan koneksi dan membagi kedua gateway agar tidak terjadi overload. Tujuan Penelitian untuk mengimplementasikan fitur load balancing pada mikrotik agar dapat lebih efektif dalam meratakan beban traffic pada kedua jalur koneksi internet. Metode yang digunakan dalam penelitian ini menggunakan empat tahapan 1). indentifikasi, 2). pengadaan perangkat hardware dan software,3). Perancangan atau desain jaringan, 4).pengujian jaringan. Pengujian kualitas koneksi dari masing-masing Internet Service Provider (ISP) dibagi menjadi tiga; Hasil pertama pada saat koneksi ISP 1 enable dan koneksi ISP 2 disable didapat ping 64 ms, download 0,87 Mbps dan uploud 0,93 Mbps. Hasil kedua koneksi ISP 2 enable dan koneksi ISP 1 disable didapat ping 102 ms, download 0,50 Mbps dan uploud 0,03 Mbps. dan untuk hasil ketiga koneksi ISP 1 dan koneksi ISP 2 di enable didapat ping 431 ms, download 0,73 Mbps dan uploud 0,15 Mbps
Propagation modeling is the most important part of mobile wireless network planning. Wireless network planning requires an accurate calculation of the path, which depends on different environmental conditions. It requires accurate path loss modeling of the characteristics of a specific region. The study aimed to obtain a path loss propagation model by modifying the ECC model and using linear, logarithmic regression in lowland areas. The measurement used drive test method, located in the Jakabaring area that represented the lowland area. This research used four existing path loss models, namely Okumura-Hatta, COST-Hatta, Ericsson Model, and ECC Model. It was found that the Okumura-Hatta model had the largest RMSE value, 34.90, followed by the Ericsson model, 27.07, while the ECC model had the smallest RMSE value, 8.43. The ECC model required to be modified using logarithmic, linear regression to obtain the proposed model. The results of the evaluation showed that the proposed model improved with RMSE 4.93, MAPE 2.71, and MAD 3.91, whereas the values of the existing ECC Model before modification were 8.43 for RMSE, 4.72 for MAPE and 7.09 for MAD. The proposed model provided an accurate prediction of the path loss propagation in a lowland environment. The results of the study can be used for planning engineers to plan, design, and implement the wireless communication networks in lowland area conditions.
Turbin crossflow dikelompokkan dalam jenis turbin skala mikro dengan rentang tinggi jatuh efektif aliran dibawah 30 m, dengan sudut peletakan turbin maksimal 30o. Kajian penelitian ini bertujuan untuk menganalisis karakteristik turbin crossflow kapasitas 5 kW. Metode penelitian kasus berdasarkan pengumpulan data pada objek kajian. Kesimpulan yang disarikan dari kajian penelitian tersebut berupa kecenderungan kenaikan putaran poros turbin berbanding dengan penambahan kecepatan alir fluida. Fenomena ini cukup signifikan dengan karakteristik kurva turbin crossflow. Indikasi perubahan daya terbangkitkan yang diakibatkan oleh perubahan putaran pada poros turbin yang beragam disebabkan oleh heterogenitas aliran pada saluran pembawa. Karakteristik mekanis menghasilkan putaran sebesar 256,30 rpm dan daya yang terbangkitkan pada turbin sebesar 4,88 kW.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.