Floods are increasingly occurring around the world more often, this implies analysing the risks connected to both human health and the environment, and to infrastructure and properties. The objective is to establish areas susceptible to flooding and their impact on the population through the effects on the unit of analysis "housing". To simulate the floods and map the affected areas, the FluBiDi 2D model was used. Two conditions for one urban zone analysed within the Mexico Valley were compared: (a) with the current hydraulic infrastructure and (b) with the application of rectification of channels. The available information was the discharge getting into the catchment and the total of homes in 2015. Projections for 20-year and 50-year planning horizon were considered, and for the 50 years, an evaluation of a non-structural measure was applied. Results show that under the current infrastructure, the flood simulated had a flow depth of 20 cm, decreasing to 5 cm average with rectification of channels, and a decrement of 45% of the cost of housing risk. Applying the both structural and non-structural measures, the cost of vulnerable housing was reduced until 94%, thus, this a trustworthy tool for decision-making in urban developments.
RESUMENEl análisis de datos numéricos en ingeniería demanda el empleo o desarrollo de herramientas que permitan, entre otros cálculos, la elaboración de gráficas donde se presenten una o más funciones. En este artículo se presenta paso a paso el uso de Visual Basic 6® y el control PictureBox® para dibujar una o más series en un mismo gráfico y que pueden ser de igual o distinta longitud o cantidad de datos, para su comparación. Se ejemplifica su aplicación con éxito en el caso del manejo de datos de precipitación de estaciones pluviográficas. La metodología presentada puede utilizarse con Visual Basic 6®, pero el proceso puede codificarse en otros lenguajes de programación comúnmente aplicados como herramientas en la solución de diversos problemas de ingeniería que tienen que ver con la revisión rápida de procesos de generación de datos.Palabras clave: Gráficos, PictureBox®, serie de datos, Visual Basic 6®, estadística. ABSTRACTNumerical analysis data in engineering needs the use or development of software that allows creating the graphical representation of functions, among other calculations. In this article a step by step use of Visual Basic 6® and the control PictureBox® are presented as helping tools to draw one or more series in the same graphic, with the same or different length or data quantity for their comparison. The management of rainfall data from a pluviographic station is presented as an example of this successful application. The methodology here presented can be used with Visual Basic 6®, but the process can be codified in other computing languages commonly applied as tools to solve several engineering problems related to the quick inspection of data generation processes.
Se propone el diseño de una red de drenaje pluvial urbana con un método de optimación que consta de dos partes, en una se plantea la conexión de los pozos de visita de manera que se tenga poco recorrido del agua en sus tuberías y en la otra, se basa en un algoritmo genético para encontrar el menor costo de adquisición de las tuberías y de la excavación necesaria para su instalación cumpliendo con varias restricciones hidráulicas y constructivas recomendadas en manuales de construcción de redes de este tipo. El procedimiento descrito se hace el enlace de las tuberías que conforman la red (trazo de la red) procurando que se obtenga la menor suma de las longitudes ellas. Se considera que los conductos son de sección circular donde sus diámetros solo toman valores comerciales. Se calcula la pendiente de cada tubería de la red tratando que la profundidad hidráulica del flujo del agua (tirante) sea del 80% del diámetro, para aproximarse a la capacidad de conducción de flujo del líquido en su interior. Finalmente, se muestra su aplicación a un caso real y se revisa el funcionamiento hidráulico de la red diseñada simulando con el modelo EPA-SWMM 5.1.015 el flujo a superficie libre no permanente en la red para asegurarse que se cumplieron las restricciones hidráulicas y las hipótesis plantadas con flujo permanente.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.