Bu çalışma, Türkiye’nin Doğu Anadolu Bölgesi’nde bulunan Tunceli ilinin aynı adı taşıyan şehir yerleşmesinin kuruluşu, mekânsal ve zamansal gelişiminde jeomorfolojik özelliklerin etkilerinin belirlenebilmesi amacıyla hazırlanmıştır. Bu amaç doğrultusunda şehir yerleşim alanının mekânsal gelişimine etki eden jeomorfolojik faktörler (jeolojik birimler, eğim, yükselti, bakı) değerlendirilmiş ve haritalandırılmıştır. Daha sonra 1984, 2000 ve 2020 yıllarına ait şehir yerleşim alanı ile faktör haritaları çakıştırılmış, elde edilen sonuçlar zonal, korelasyon ve regresyon analizine tabi tutularak aralarındaki ilişki açıklanmıştır. Zonal analiz ile şehir yerleşmesinin jeomorfolojik faktörlerin alt kriterlerine göre dağılışı tespit edilmiş ve sınırları belirgin olarak çizilmiştir. Korelasyon analizi ile şehir yerleşim alanı ve jeomorfolojik faktörler arasındaki ilişkinin yönü ve şiddeti tespit edilmiştir. Son olarak regresyon analizi ile her bir jeomorfolojik faktörün şehir yerleşmesinin dağılışı üzerindeki etki oranı ve yıllar içerisindeki değişimi belirlenmiştir. Sonuç olarak, şehir yerleşim alanı 1984 yılında 950,01-1000 m yükselti basamağında, 0-10⁰ eğim grubunda, GD yöne bakan alçak plato alanlarında yoğunlaşmıştır. 2000 yılında 900,01-950 m yükselti basamağında, 0-10⁰ eğim grubunda, GD yöne bakan alçak plato alanlarında yoğunlaşmıştır. 2020 yılında ise 900,01-950 m yükselti basamağında, 0-10⁰ eğim grubunda, GD yöne bakan taraçalarda yoğunlaşmıştır. Her üç analiz sonucuna göre: Tunceli şehir yerleşim alanı ile eğim arasında çok kuvvetli, jeomorfolojik birimler ile kuvvetli, bakı ile orta, yükselti ile zayıf bir ilişki tespit edilmiştir. Şehirde bundan sonra yapılacak kentsel arazi kullanım plan ve projelerinin tamamında jeomorfolojik faktörlerin neden olduğu kısıtların dikkate alınması önem arz etmektedir.
Karadeniz Bölgesi’nin Batı Karadeniz Bölümü’nde yer alan Ayancık Çayı Havzası’nda, bölge genelinde olduğu gibi taşkın olayları sıklıkla görülmektedir. Ayancık Çayı Havzası’ndaki taşkın olaylarını drenaj havzası morfometrisine bağlı olarak değerlendirmeyi amaçlayan bu çalışmada, morfometrik indisler kullanarak havzanın taşkın potansiyeli belirlenmeye çalışılmıştır. Bu amaç doğrultusunda havzada alanı 0.4-175.3 km2 arasında değişen 24 alt havzaya çizgisel, alan ve rölyef morfometri parametrelerine bağlı 20 farklı morfometrik indis uygulanarak her bir alt havzanın taşkın potansiyeli tespit edilmiş ve açıklanmıştır. Belirlenen bu alt havzaların, olası taşkın oluşturma potansiyelleri iki farklı yöntem ile açıklanmaya çalışılmıştır. Morfometrik analiz ve temel bileşen analizi (TBA) esas alınarak alt havzaların öncelik sıralaması yüksek, orta ve düşük öncelik olarak 3 sınıfta değerlendirilmiştir. Morfometrik analiz sonucuna göre: 11 adet alt havza yüksek, 7 alt havza orta, 6 alt havza da düşük önceliğe sahiptir. Temel bileşen analizine göre ise 6 alt havza yüksek, 11 alt havza orta, 7 alt havza düşük önceliğe sahiptir. Bununla birlikte her iki yöntemin benzer sonuçları değerlendirildiğinde, yüksek önceliğe sahip 6 alt havza, orta önceliğe sahip 5 alt havza, düşük önceliğe sahip 4 alt havzanın olduğu belirlenmiştir. Ayancık Çayı Havzası’ndaki alt havzaların havza morfometrisine bağlı olarak değerlendirilmesi sonucunda, alt havzaların drenaj, geometrik ve topografik özelliklerinin taşkın olasılıklarının anlaşılmasında önemli rol oynadığı görülmüştür.
Araştırma alanının sınırı, Bingöl Ovası'nın kuzey kesimlerinde yerleşmelerin yoğun olarak bulunduğu ve bu yerleşmelerin gelişim yönlerinin bir sorun oluşturduğu saha dikkate alınarak çizilmiştir. Bahsi geçen alanda, ilin az ve kıymetli olan ovadaki tarım toprakları yerleşim alanları tarafından hızla tüketilmektedir. Bu nedenle araştırma alanında yerleşmelerin mekânsal gelişimi için uygun alanların tespit edilmesi büyük önem taşımaktadır. Bu çalışmada Uzaktan Algılama (UA) ve Coğrafi Bilgi Sistemleri (CBS) teknolojileri ile AHS tekniği kullanılarak, mevcut arazinin coğrafi potansiyeli doğrultusunda kentsel gelişim için uygunluğu analiz edilmiştir. Uygunluk analizine göre 181 km²'lik çalışma alanının, % 36,5'ü (66 km²) yerleşmelerin gelişimi için en uygun, % 35,9'u (65 km²) yerleşmelerin gelişimi için orta derecede uygun, % 27,6'sı (50 km²) az uygun ve 0.02 km²'lik alan (% 0,01) da yerleşmelerin gelişimi için uygun değildir. Araştırma alanında doğru bir mekânsal gelişim planlaması yapıldığı takdirde yerleşmeler için en uygun alanlar, sadece önümüzdeki 17 yıl boyunca genişleme ihtiyacını karşılayabilecek yeterliliktedir.
Bu çalışmada Elbistan Havzası’nın jeomorfolojik gelişimine etki eden yapısal özellikler jeomorfometrik indislerle sorgulanmıştır. Sorgulamada, Elbistan Havzası’na ait 25 alt havzanın jeomorfolojik özelliklerini kazanmasında jeolojik yapı ve tektoniğin etkisi kantitatif verilerle açıklanmaya çalışılmıştır. Bu amaç doğrultusunda her bir alt havzaya drenaj havza asimetrisi (Af), transvers topografik simetri faktörü (T), havza rölyefi (Bh), rölyef oranı (Rh), havza şekli indeksi (Bs), hipsometrik eğri (Hc) ve hipsometrik integral (Hi) gibi jeomorfometrik indisler uygulanmıştır. Uygulama esnasında 10x10 metre çözünürlüklü Sayısal Yükseklik Modeli, jeoloji verisi, aktif fay verisi ile Coğrafi Bilgi Sistemi yazılımlarından ArcGIS 10.7 paket programı kullanılmıştır. Havzaya uygulanan indislerden (Af, T, Bh, Rh, Bs, Hc ve Hi) elde edilen kantitatif veriler birbirleri ile tutarlı sonuçlar vermiştir. Yani alt havzalarda tektoniğin etki derecesine göre yapılan sınıflandırmalar esas alındığında genellikle aynı alt havzaların aynı grupta yer aldığı görülür. Bununla birlikte yakın lokasyonda yer alan alt havzalar da çoğunlukla aynı sınıflarda yer almıştır. Dolayısıyla jeomorfometrik indislerden elde edilen verilerin tamamı fayların geçtikleri alanlardaki alt havzaların formlarına farklı derecelerde etki ettiğini destekler niteliktedir. Elbistan Havzasın’da alt havzaların farklı özellikte olmasında aktif tektonik ve litoloji önemli rol oynamıştır.
Bu çalışmanın amacı, Berit Dağları'nda litolojik ve jeomorfolojik faktörlerin bitki örtüsünün dağılışına etkisini açıklamaktır. Bu amaçla litolojik ve jeomorfolojik faktörlere ait alt kriterler ile bitki örtüsü katman haritaları oluşturulmuştur. Oluşturulan katman haritaları, Coğrafi Bilgi Sistemleri (CBS) teknikleriyle, ArcGIS 10.7 yazılımı kullanılarak çakıştırılmıştır. Çakıştırma işlemi sonunda her bir jeomorfolojik faktörün alt kriterinde bulunan bitki türü ve alanı tespit edilmiştir. Buna göre, Berit Dağları'nda 1600,01-1800 m yükseltileri arasındaki yüksek plato ve yamaçlarda şist anakayası üzerinde 45,01º> eğimli alanlarda kuzeydoğu, doğu ve güneydoğu yönlerde bitki çeşitliliği ve yoğunluğu fazladır. Buna karşılık 2400 m'den yüksek alanlardaki zirve düzlükleri üzerinde, ofiyolitik melanj ve 0-15ºeğimli güney ve güneybatı yönlü alanlarda bitki tür çeşitliliği ve yoğunluğu azdır. Çalışma sonucunda, Berit Dağları'nda litoloji, yerşekilleri, yükselti, eğim ve bakı gibi jeomorfolojik faktörlerin bitki örtüsü çeşitliliğini ve dağılışını etkileyen önemli unsurlar olduğu anlaşılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.