No abstract

Two assumptions have been made based on by this proposed theory, which come from recently developed exponential–trigonometric shape function for transverse shear deformation effect and a simple higher order shear deformation theory for plate, based on a constraint between two rotational displacements of axis parallel to the plate midplane, about the axes x, y Cartesian coordinates system, which caused fewer unknown number. For the application of this method, a displacement field extended as only bending membrane for transverse displacement is used, a governing equations of motion as a result are determined according to Hamilton’s principle, and simplified using Navier analytical solutions, as well as the transverse shear stresses effect that satisfied the stress-free boundary conditions on the simply supported plate free faces as a parabolic variation along the thickness are taken into account. A functionally graded materials plates are chosen for the parametric study, where the plates are functionally graded continuously in materials through the plate thickness as a function of power law or exponential form. The aim of this study is to analyze the bending, free vibration as well as the buckling mechanical behaviors, where the results are more focused on the investigation of different parameters such as the volume fraction index, geometric ratios, frequency modes, in-plane compressive load parameters and material properties effects on the deflection, stresses, natural frequencies, and critical buckling load, which are validated in terms of accuracy and efficiency with other plate theories results found in the literature.

No abstract

This paper presents an analytical solution to the free vibration analysis of functionally graded beams by using a refined hyperbolic shear deformation theory in which the stretching effect is included. The modulus of elasticity of beams is assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. Equations of motion are derived from Hamilton's principle and Navier-type analytical solutions for simply supported beams are compared with the existing solutions to verify the validity of the developed theory. Numerical results are obtained to investigate the effects of the power-law index and sideto-thickness ratio on the natural frequencies. It can be concluded that the present theories are not only accurate but also simple in predicting the free vibration responses of FG beams.

No abstract

This paper presents the flexural analysis of functionally graded plates resting on elastic foundations using new two-dimensional (2D) and quasi-three-dimensional (quasi-3D) higher order shear deformation theories. The main interesting feature of this theory is that it proposes a new displacement field with undetermined integral variables which involves only five unknown functions, unlike other shear and normal deformation theories, hence making it easier to use. A parabolic transverse shear deformation shape function satisfying the zero shear stress conditions on the plate outer surfaces is considered. The elastic foundation follows the Pasternak mathematical model. The material properties change continuously across the thickness of the FG plate using different distributions: power law, exponential, and Mori–Tanaka models. The governing equations of FG plates subjected to sinusoidal and uniformly distributed loads are established through the principle of virtual works and then solved via Navier’s procedure. In this work, a detailed discussion on the influence of material composition, geometric parameters, stretching effect, and foundation parameters on the deflection, axial displacements, and stresses is given, and the obtained results are compared with those published in previous works to demonstrate the accuracy and the simplicity of the present formulations. The different obtained results were found to be in good agreement with the available solutions of other higher-order theories. The proposed model is able to represent the cross section warping in the deformed shape and to demonstrate the validity and efficiency of the approach, the findings reported herein prove that this theory is capable of predicting displacements and stresses more accurately than other theories, as its results are closer when compared to numerical methods reported in other literatures.

No abstract

This study presents a hyperbolic shear deformation theory for free vibration of functionally graded plates on elastic foundations. The field of displacements is chosen based on the assumptions that axial and transverse displacements consist of components due to bending and shear. The components of the axial shear displacements give rise to the parabolic variation in the shear strain through the thickness, such that the shear stresses vanish on the plate boundaries. Therefore, the shear correction factor is not necessary. The material properties of the functionally graded plate are assumed to vary through the thickness according to the power law of the volume fraction of the constituents. The elastic foundation is modeled as a Pasternak foundation. The equations of motion are derived using Hamilton’s principle. The analytical solutions were established from Navier’s approach, and the results obtained are found to be in good agreement with the solutions of three-dimensional elasticity and with the solutions of the various plate theories. The effects of the power law index, the thickness ratio, and the foundation parameters on the natural frequency of the plates were also evaluated.