The huge plastic production and plastic pollution are considered important global issues due to environmental aspects. One practical and efficient way to address them is to replace fossil-based plastics with natural-based materials, such as cellulose. The applications of different cellulose products have recently received increasing attention because of their desirable properties, such as biodegradability and sustainability. In this regard, the current study initially reviews cellulose products’ properties in three categories, including biopolymers based on the cellulose-derived monomer, cellulose fibers and their derivatives, and nanocellulose. The available life cycle assessments (LCA) for cellulose were comprehensively reviewed and classified at all the stages, including extraction of cellulose in various forms, manufacturing, usage, and disposal. Finally, due to the development of low-carbon materials in recent years and the importance of greenhouse gases (GHG) emissions, the proposed solutions to make cellulose a low carbon material were made. The optimization of the cellulose production process, such as the recovery of excessive solvents and using by-products as inputs for other processes, seem to be the most important step toward making it a low carbon material.

Polyethylene (PE) is one the most used plastics worldwide for a wide range of applications due to its good mechanical and chemical resistance, low density, cost efficiency, ease of processability, non-reactivity, low toxicity, good electric insulation, and good functionality. However, its high flammability and rapid flame spread pose dangers for certain applications. Therefore, different flame-retardant (FR) additives are incorporated into PE to increase its flame retardancy. In this review article, research papers from the past 10 years on the flame retardancy of PE systems are comprehensively reviewed and classified based on the additive sources. The FR additives are classified in well-known FR families, including phosphorous, melamine, nitrogen, inorganic hydroxides, boron, and silicon. The mechanism of fire retardance in each family is pinpointed. In addition to the efficiency of each FR in increasing the flame retardancy, its impact on the mechanical properties of the PE system is also discussed. Most of the FRs can decrease the heat release rate (HRR) of the PE products and simultaneously maintains the mechanical properties in appropriate ratios. Based on the literature, inorganic hydroxide seems to be used more in PE systems compared to other families. Finally, the role of nanotechnology for more efficient FR-PE systems is discussed and recommendations are given on implementing strategies that could help incorporate flame retardancy in the circular economy model.

Nonlinear elastoplastic behavior of the nanocomposites based on the styreneacrylonitrile/carboxylated acrylonitrile butadiene rubber (SAN/XNBR) blend was investigated using experimental and theoretical analysis. Graphene, graphene oxide nanoparticles, and glycidyl methacrylate-grafted-XNBR (XNBR-g-GMA) as a compatibilizer were incorporated in the SAN/XNBR blends. In this regard, the focus of this study is on modeling of the stress-strain behavior of these nanocomposites, considering the effect of the interfacial interactions made by compatibilizer. For this purpose, field emission scanning electron microscopy (FESEM) and transmission electron microscope (TEM) techniques were used to investigate the relationship between microstructure and mechanical properties of nanocomposites. In addition, FESEM and TEM images showed that the presence of a compatibilizer could influence the dispersion and localization of the nanoparticles. According to the tensile test results, the presence of the compatibilizer increased the mechanical properties of the nanocomposites, specifically elongation at break. Considering the nanocomposite containing compatibilizer and graphene oxide, the elongation at break increased about 570% compared with the nanocomposite without compatibilizer. Better dispersion of graphene oxide and the creation of chemical interaction among components in the presence of the XNBR-g-GMA compatibilizer could be the reasons for these improvements, as confirmed by TEM. The usage of the Bergstrom-Boyce model for analyzing the nonlinear elastoplastic behavior of the nanocomposites illustrated proper conformity with the experimental data in the elastic region. However, there are some deviations in the viscoplastic region, particularly close to the breaking elongation region.