Abstrak Kapal tradisional yang berada pada jalur pelayaran di Maluku, khusus pada jalur pelayaran Ambon-Manipa memiliki peran penting sebagai salah satu moda transportasi di Maluku. Kapal-kapal kayu ini dibangun tanpa melalui kajian ilmiah, tetapi hanya berdasarkan pengalaman turun- temurun dalam menentukan panjang kapal, bentuk lambung, daya muat serta ukuran lainnya. Hal ini sangat berpengaruh terhadap hambatan kapal sebab jika nilai hambatannya besar, sangat mempengaruhi operasional kapal dan dapat merugikan pemilik kapal itu sendiri. Itulah sebabnya tujuan penelitian ini adalah untuk mengaji ulang secara ilmiah dengan menggambar model kapal yakni lines plan dari kapal yang terpilih dengan kecepatan yang ada, hambatan sekecil mungkin dengan daya muat sebesar mungkin. Metode AHP( Analytic Hierarchy Proces) adalah metode yang digunakkan untuk pemilihan kapal dari lima buah kapal yang ada pada jalur pelayaran Ambon- Manipa. Berdasarkan hasil survey di lapangan dan pengolahan data, terpilih KM Cahaya Rahma. Hasil yang diperoleh menggunakan aplikasi Maxsurf adalah perhitungan hidrostatik untuk mengetahui displasemen kapal atau berat kapal total saat garis air penuh sebesar 25.67 ton. Nilai hambatan dan daya kapal adalah 4.96 kN dan 23.004 kW pada saat kecepat an kapal 9 knot.
Tanah liat adalah bahan dasar membuat bata merah yang sumber daya alamnya melimpah di maluku, sedangkan serat sabut kelapa adalah merupakan potensi limbah alam yang sampai sekarang belum dikaji secara ilmiah dan dimanfaatkan untuk suatu tipe material. Sedangkan pati sagu dalam penelitian ini digunakan sebagai perekat yang nantinya dipakai pada saat pembuatan bata merah. Penelitian ini menggunakan metode Hand Lay Up, dalam pembuatan komposit serat tunggal dengan variasi fraksi volume tanah liat : serat sabut kelapa : matrik pati sagu yaitu, 50%:10%:40%, 50%:20%:30%, 50%:30%:20%, dan 50%:40%:10%. Komposisi komposit dibuat sesuai variasi fraksi volume yang sudah ditentukan, dan dicetakan dengan cara manual. Setelah itu specimen di keringkan pada suhu 130⁰C, selama 1 jam, kemudian dilakukan uji impak. Hasil penelitian adalah terjadi kenaikan kekuatan impak seiring penambahan fraksi volume, dimana energi impak tertinggi untuk fraksi volume 50% : 40%:10%, sebesar 2.38 J, dan energi impak terendah pada fraksi volume 50% : 10%:40%, sebesar 1.67 J. dan harga impak tertinggi untuk fraksi volume 50% : 40%:10%, sebesar 0.030 J/mm2, dan energi impak terendah pada fraksi volume 50% :10%:40%, sebesar 0.021 J/mm2. Sehingga dapat disimpulkan bahwa kekuatan impak komposit serat sabut kelapa dan tanah liat yang diperkuat pati sagu mengalami peningkatan seiring dengan bertambahnya fraksi volume serat.
Durian rind fiber composite as a reinforcement is one of the interesting research areas. Some of the advantages associated with using natural fibers due to reinforcement in polymers are their non-abrasive properties and low-cost consumption. Durian rind when processed further can be made into cellulose fiber which can be used as a natural filler in unsaturated polyester composites. Among various types of natural fibers, durian skin fiber is an alternative polymer composite filler. Durian skin can be obtained easily because it is a family waste that has not been used. To get a new composite material made from durian skin waste, and to help the community and government in handling durian skin waste. The purpose of this study was to determine the maximum value of the variation of the volume fraction of durian skin fiber on the impact strength and hardness strength according to the desired application. This study uses the Hand Lay Up method, in the manufacture of single fiber composites with variations in volume fraction of durian skin fiber: polyester matrix, namely, 10%: 90%, 20%: 80%, 30%: 70%, 40%: 60% and 50 %:50%. The results showed that there was an increase in the impact strength and hardness strength with the addition of the volume fraction, where the highest impact energy for the volume fraction of durian skin fiber was 50%: 50%, 0.7738 J, and the highest impact value was 0.0096725 J/mm² and energy the lowest impact is 10%: 90%, 0.461 J. and the lowest impact price is 0.0057685 J/mm². So it can be concluded that the impact strength and hardness of the durian skin fiber composite increased with the increase in the volume fraction of the fiber.
<p><strong>Abstrak</strong></p><p><strong> </strong></p><p>Supercharger dan resonator merupakan salah satu komponen penting menyangkut tekanan udara pada langkah pembakaran dalam motor diesel 4 tak. Penelitian ini bertujuan untuk mengetahui pengaruh diameter tabung Ear Resonator terhadap tekanan aliran udara Supercharging pada Inlet Manifold. Metode eksperimental digunakan dalam penelitian dengan memvariasikan diameter tabung sebanyak 5 buah Ear Resonator yaitu ½”, ¾”, 1”, 11/4”, dan 1½” yang dipasang secara horizontal. Hasil olahan selisih rata-rata tekanan input dan output menyatakan bahwa variasi diameter tabung Ear Resonator berpengaruh terhadap tekanan yaitu: Variasi ke-2 merupakan tekanan output tertinggi dengan nilai sebesar 101359.90 N/m2 atau dengan beda tekanan output dan input dengan nilai sebesar -64.92 N/m2 atau sebesar -0.06 %. Variasi ke-5 merupakan salah satu tekanan output terendah dengan nilai sebesar 101325.04 N/m2 atau dengan beda tekanan output dan input tertinggi dengan nilai sebesar 23.31 N/m2 atau sebesar 0.02 %.</p>
Es balok sebagai salah satu media pendingin ikan sering digunakan oleh nelayan tradisional untuk menyimpan ikan di dalam palka, akan tetapi penggunaannya dinilai kurang efektif karena dapat menyebabkan kerugian bagi nelayan. Sehingga, harus dibuat sistem pendingin aktif sebagai pengganti es balok, salah satu bagian dari sistem pendingin aktif adalah evaporator. Penelitian ini bertujuan untuk mengetahui beban panas yang harus dienyahkan oleh evaporator serta mendesain evaporator untuk kapal ikan 3 GT. Penelitian ini dilakukan dengan metode observasi lapangan, wawancara, dan studi literature kemudian dilakukan pengolahan data dan analisis data. Dari hasil perhitungan panas yang harus dienyahkan oleh evaporator sebesar 6,410270319 kJ/hr, serta desain evaporator adalah sebagai berikut, diameter pipa evaporator sebesar 9,53mm, jenis pipa yaitu pipa tembaga jenis K, panjang keseluruhan pipa sebesar 21,70667314 m, tipe evaporator bare, serta sistim refrigrasi yang digunakan adalah sistim refrigerasi kering. COP yang didapat sebesar 90 %.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.