The morphology and dimension of the conductive filament formed in a memristive device are strongly influenced by the thickness of its switching medium layer. Aggressive scaling of this active layer thickness is critical toward reducing the operating current, voltage, and energy consumption in filamentary-type memristors. Previously, the thickness of this filament layer has been limited to above a few nanometers due to processing constraints, making it challenging to further suppress the on-state current and the switching voltage. Here, the formation of conductive filaments in a material medium with sub-nanometer thickness formed through the oxidation of atomically thin two-dimensional boron nitride is studied. The resulting memristive device exhibits sub-nanometer filamentary switching with sub-pA operation current and femtojoule per bit energy consumption. Furthermore, by confining the filament to the atomic scale, current switching characteristics are observed that are distinct from that in thicker medium due to the profoundly different atomic kinetics. The filament morphology in such an aggressively scaled memristive device is also theoretically explored. These ultralow energy devices are promising for realizing femtojoule and sub-femtojoule electronic computation, which can be attractive for applications in a wide range of electronics systems that desire ultralow power operation.

No abstract

We have demonstrated that by coating with a thin dielectric layer of tetrahedral amorphous carbon (ta-C), a biocompatible and optical transparent material in the visible range, the Ag nanoparticle-based substrate becomes extremely suitable for surface-enhanced Raman spectroscopy (SERS). Our measurements show that a 10 Å or thicker ta-C layer becomes efficient to protect the oxygen-free Ag in air and prevent Ag ionizing in aqueous solutions. Furthermore, the Ag nanoparticles substrate coated with a 10 Å ta-C film shows a higher enhancement of Raman signals than the uncoated substrate. These observations are further supported by our numerical simulations. We suggest that biomolecule detections in analytic assays could be easily realized using ta-C-coated Ag-based substrate for SERS especially in the visible range. The coated substrate also has higher mechanical stability, chemical inertness, and technological compliance, and may be useful, for example, to enhance TiO2 photocatalysis and solar-cell efficiency by the surface plasmons.

The exact knowledge of helical carbon nanotube (HCNT) growth mechanism has not yet been completely clarified, and effective synthesis of high-purity helical carbon nanotubes in high yield still remains a tremendous challenge. In this study, HCNTs were synthesized via a catalytic chemical vapor deposition method using Fe nanoparticles as catalysts. We performed systematic experiments to investigate the specific effect of catalytic particle size (CPS) on the selective growth of HCNTs, such as on the morphology, yield, mobility of carbon atoms, and HCNT purity of carbon products. Our study showed that the CPS plays a key role in the selectivity to HCNTs, yield, and morphology of the carbon products, and a small catalytic particle is favorable to HCNT formation. We hope that this result may give a beneficial suggestion to obtain highly pure HCNTs. A CPS-dependent growth mechanism for HCNTs was finally proposed. Magnetic measurements demonstrated that the HCNTs are ferromagnetic properties and show high magnetization at room temperature.