Iradiasi sinar gamma merupakan salah satu cara untuk mendapatkan varietas tanaman krisan melalui mekanisme mutasi genetic dengan cepat. Teknik dan dosis iradiasi menentukan kualitas hasil mutasi. Telah dilakukan penelitian di Kebun percobaan, Batan, Cipanas mengenai Pengaruh Iradiasi Sinar Sinar gamma Terhadap Pertumbuhan Krisan dengan Menggunakan Teknik Iradiasi Tunggal dan Berulang. Berdasarkan hasil pengamatan, iradiasi sinar sinar gamma 10 Gy dapat merangsang pertumbuhan tinggi tanaman krisan dengan rata-rata 21,10 cm, percepatan munculnya calon bunga pertama dengan presentase 100% dan perlakuan iradiasi dengan taraf dosis 10 Gy dan 20 Gy menginduksi warna bunga bermutasi menjadi warna kuning dengan presentase 20% dan 17,04%. Perlakuan iradiasi 30 Gy dan 40 Gy menyebabkan tanaman krisan Kusumasakti tidak dapat berbunga. Taraf dosis 10 Gy berpengaruh nyata terhadap pertumbuhan krisan sehingga pada umur 6 MST persentase bunga pertama yang tumbuh mencapai 86,67% dengan menggunakan teknik iradiasi tunggal dan 83,33% dengan menggunakan teknik iradiasi berulang. Total 57 tanaman mutan positif yang potensial untuk dikembangkan lebih lanjut sebagai bahan pemulian tanaman.
PENGARUH TEMPERATUR DAN KOMPOSISI Nb TERHADAP INTERDIFUSI PADUAN U-Zr-Nb. Telah dilakukan simulasi percobaan intermik bahan bakar U-Zr-Nb dengan pelat aluminium. Mula-mula dibuat ingot paduan U-6Zr-2Nb, U-6Zr-5Nb, dan U-6Zr-8Nb menggunakan tungku peleburan busur listrik. Ingot yang diperoleh dipotong-potong menjadi berukuran ketebalan 2-3 mm dan diameter sekitar 5-6 mm selanjutnya ditutup menggunakan pelat Al pada salah satu sisinya serta dipress. Setelah dipress, ingot paduan U-6Zr-2Nb, U-6Zr-5Nb, dan U-6Zr-8Nb dipanaskan pada temperature 350 dan 450 °C selama 1 jam. Setelah dipanaskan ingot dikenai beberapa pengujian yaitu mikrostruktur menggunakan mikroskop optik dan Scanning Electron Microscope (SEM) yang dilengkapi dengan Energy Dispersive Spectrometer (EDS), kekerasan menggunakan uji kekerasan mikro, dan fasa dengan alat X-ray diffractometer (XRD). Hasil pemeriksaan mikrostruktur menunjukkan masih terlihat dengan jelas batas antara lapisan (interface) U-6Zr-2Nb, U-6Zr-5Nb, dan U-6Zr-8Nb dengan lapisan Al. Semakin tinggi kandungan Nb semakin rapat rapat interface antara kedua lapisan. Pada pengujian kekerasan mikro terlihat bahwa kekerasan pada interface sulit diukur sedangkan pada daerah U-Zr-Nb menunjukkan kenaikan kekerasan pada pemanasan dari 350 menjadi 450 °C, sedangkan pada bagian Al terjadi penurunan kekerasan pada kenaikan temperatur pemanasan dari 350 menjadi 450 °C. Terbentuk senyawa UO3 pada semua sampel uji sedangkan fasa γ-U terbentuk pada sampel U-6Zr-2Nb baik yang dipanaskan pada temperatur 350 maupun 450 °C.Kata kunci: Intermik, paduan U-Zr-Nb, aluminium, mikrostruktur, kekerasan, fasa.
PENGARUH PENAMBAHAN LARUTAN H3BO3 DAN LiOH TERHADAP PERILAKU KOROSI MATERIAL KELONGSONG ZIRCALOY-2 DALAM MEDIA AIR BEBAS MINERAL. Pendingin primer pada reaktor tipe PHWR dikendalikan secara kimia dengan penambahan asam borat dan LiOH untuk mengantisipasi korosi pada kelongsong bahan bakar yang menggunakan material zircaloy-2 (Zr-2.) Penelitian ini bertujuan untuk menganalisis pengaruh penambahan larutan H3BO3 dan LiOH terhadap jenis dan laju korosi material kelongsong bahan bakar Zr-2 dalam media air bebas mineral. Penambahan bahan H3BO3 dan LiOH pada pendingin reaktor PHWR adalah untuk pengendalian secara kimia. Uji korosi dilakukan pada temperatur kamar untuk menghilangkan pengaruh temperatur tinggi dan tekanan pada proses elektrokimia. Pada penelitian ini dilakukan pengamatan laju korosi material Zr-2 di dalam media air bebas mineral dengan penambahan H3BO3 dan LiOH dengan variasi konsentrasi. Hasil pengamatan, laju korosi Zr-2 menggunakan metode Tafel pada dalam media air bebas mineral dengan penambahan H3BO3 pada konsentrasi 10 ppm, 100 ppm, 500 ppm, 1000 ppm dan 2000 ppm diperoleh laju korosi masing masing 17,29 x 10-3 mpy, 18,51 x 10-3 mpy, 20,82 x 10-3 mpy, 22,71 x 10-3 mpy dan 23,29 x 10-3 mpy. Setelah air bebas mineral, kemudian ditambahkan H3BO3 sebesar 2000 ppm dan LiOH dengan konsentrasi 1 ppm, 2 ppm, 3 ppm, 4 ppm. Hasil analisis menunjukkan bahwa dengan penambahan H3BO3 dan LiOH diperoleh laju korosi semakin menurun secara berurutan yaitu 22,71 x 10-3 mpy, 21,88 x 10-3 mpy, 21.41 x 10-3 mpy, 21,39 x 10-3 mpy, dan penambahan LiOH 5 ppm menyebabkan laju korosi meningkat menjadi 21,45 x 10-3 mpy. Hasil penelitian ini dapat disimpulkan bahwa penambahan LiOH dan H3BO3 berpengaruh terhadap laju korosi material zircaloy-2 dalam media air bebas mineral. Semakin tinggi konsentrasi H3BO3 yang ditambahkan menyebabkan laju korosi semakin meningkat, sedangkan dengan penambahan LiOH menyebabkan laju korosi semakin menurun hingga konsentrasi 4 ppm Namun dengan penambahan LiOH pada konsentrasi 5 ppm menyebabkan laju korosi meningkat sehingga dapat disimpulkan bahwa konsentrasi optimum penambahan LiOH adalah 4 ppm.Kata kunci: zircaloy-2, laju korosi, H3BO3, LiOH, kelongsong
This study aims to make a catalyst from biomass waste in the form of coconut coir and apply it to the transesterification process of cocodiesel. The raw material for cocodiesel in this study was a coconut-based cooking oil that was also a waste and could pollute the environment. The research method includes cooking oil analysis, the catalyst’s preparation, and the catalyst’s characterization with Brunauer-Emmet-Teller (BET), X-ray fluorescence (XRF), X-ray diffraction (XRD), and Scanning electron microscope (SEM) analysis. The next step was the application of the catalyst in the transesterification reaction. The results showed interesting information, in which the addition of the calcination process increased the catalyst’s surface area and crystallinity ratio. Applying a catalyst in converting used cooking oil to cocodiesel gave 48.5% and 51% yields with densities close to the biodiesel standard.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.