With the evolution of the fifth-generation (5G) wireless network, the Internet of Things (IoT) has become a revolutionary technique that enables a diverse number of features and applications. It can able a diverse amount of devices to be connected in order to create a single communication architecture. As it has significantly expanded in recent years, it is fundamental to study this trending technology in detail and take a close look at its applications in the different domains. It represents an enabler of new communication possibilities between people and things. The main asset of this concept is its significant influence through the creation of a new world dimension. The key features required for employing a large-scale IoT are low-cost sensors, high-speed and error-tolerant data communications, smart computations, and numerous applications. This research work is presented in four main sections, including a general overview of IoT technology, a summary of previous correlated surveys, a review regarding the main IoT applications, and a section on the challenges of IoT. The purpose of this study is to fully cover the applications of IoT, including healthcare, environmental, commercial, industrial, smart cities, and infrastructural applications. This work explains the concept of IoT and defines and summarizes its main technologies and uses, offering a next-generation protocol as a solution to the challenges. IoT challenges were investigated to enhance research and development in the fields. The contribution and weaknesses of each research work cited are covered, highlighting eventual possible research questions and open matters for IoT applications to ensure a full analysis coverage of the discussed papers.
With an extensive growth in user demand for high throughput, large capacity, and low latency, the ongoing deployment of Fifth-Generation (5G) systems is continuously exposing the inherent limitations of the system, as compared with its original premises. Such limitations are encouraging researchers worldwide to focus on next-generation 6G wireless systems, which are expected to address the constraints. To meet the above demands, future radio network architecture should be effectively designed to utilize its maximum radio spectrum capacity. It must simultaneously utilize various new techniques and technologies, such as Carrier Aggregation (CA), Cognitive Radio (CR), and small cell-based Heterogeneous Networks (HetNet), high-spectrum access (mmWave), and Massive Multiple-Input-Multiple-Output (M-MIMO), to achieve the desired results. However, the concurrent operations of these techniques in current 5G cellular networks create several spectrum management issues; thus, a comprehensive overview of these emerging technologies is presented in detail in this study. Then, the problems involved in the concurrent operations of various technologies for the spectrum management of the current 5G network are highlighted. The study aims to provide a detailed review of cooperative communication among all the techniques and potential problems associated with the spectrum management that has been addressed with the possible solutions proposed by the latest researches. Future research challenges are also discussed to highlight the necessary steps that can help achieve the desired objectives for designing 6G wireless networks.
The advent of fifth-generation (5G) systems and their mechanics have introduced an unconventional frequency spectrum of high bandwidth with most falling under the millimeter wave (mmWave) spectrum. The benefit of adopting these bands of the frequency spectrum is two-fold. First, most of these bands appear to be unutilized and they are free, thus suggesting the absence of interference from other technologies. Second, the availability of a larger bandwidth offers higher data rates for all users, as there are higher numbers of users who are connected in a small geographical area, which is also stated as the Internet of Things (IoT). Nevertheless, high-frequency band poses several challenges in terms of coverage area limitations, signal attenuation, path and penetration losses, as well as scattering. Additionally, mmWave signal bands are susceptible to blockage from buildings and other structures, particularly in higher-density urban areas. Identifying the channel performance at a given frequency is indeed necessary to optimize communication efficiency between the transmitter and receiver. Therefore, this paper investigated the potential ability of mmWave path loss models, such as floating intercept (FI) and close-in (CI), based on real measurements gathered from urban microcell outdoor environments at 38 GHz conducted at the Universiti Teknologi Malaysia (UTM), Kuala Lumpur campus. The measurement data were obtained by using a narrow band mmWave channel sounder equipped with a steerable direction horn antenna. It investigated the potential of the network for outdoor scenarios of line-of-sight (LOS) and non-line-of-sight (NLOS) with both schemes of co-(vertical-vertical) and cross (vertical-horizontal) polarization. The parameters were selected to reflect the performance and the variances with other schemes, such as average users cell throughput, throughput of users that are at cell-edges, fairness index, and spectral efficiency. The outcomes were examined for various antenna configurations as well as at different channel bandwidths to prove the enhancement of overall network performance. This work showed that the CI path loss model predicted greater network performance for the LOS condition, and also estimated significant outcomes for the NLOS environment. The outputs proved that the FI path loss model, particularly for V-V antenna polarization, gave system simulation results that were unsuitable for the NLOS scenario. IntroductionIn a 5G communication network, mobile operators are forced to use a high-frequency spectrum due to the limited amount of channel bandwidth. The 5G boosts the overall performance and enhances user experience offered by the present generation mobile technologies. Some of the most hyped features include higher data-rates, lower end-to-end delays, and minimal energy consumption [1]. In order to meet a common goal, several technologies need to be implemented in a fashion that allows the smooth operation of the overall network as a singular body. Nevertheless, vast technologies and communication...
The future wireless Fifth Generation (5G) communication network required a higher bandwidth in order to achieve greater data rate. It will be largely characterized by small cell deployments, typically in the range of 200 meters of radius/cell, at most. The implementation of small size networks delivers various advantages such as high data rate and low signal delay. However, it also suffers from various issues such as inter-cell, intra-cell, and inter-user interferences. This paper discusses the issues related to interference management for 5G network from the perspective of Heterogeneous Network and Deviceto-Device communication, by using enabling techniques, such as Inter-cell Interference Coordination, Coordinated Multipoint, and Coordinated Scheduling. Furthermore, several pertinent issues have been critically reviewed focusing on their methodologies, advantages and limitations along with the future work. Future directions proposed by the 3rd Generation Partnership Project for interference mitigation has also been outlined. This review will act as a guide for the researchers to comprehend various existing and emerging enabling interference mitigation techniques for further exploration and smooth implementation of 5G wireless network.
Processes for evaluating software architecture (SA) help to investigate problems and potential risks in SA. It is derived from many studies that proposed a plethora of systematic SA evaluation methods, while industrial practitioners currently refrain from applying them since they are heavyweight. Nowadays, heterogeneous software architectures are organized based on the new infrastructure. Hardware and associated software allow different systems, such as embedded, sensor-based, modern AI, and cloud-based systems, to cooperate efficiently. It brings more complexities to SA evaluation. Alternatively, lightweight architectural evaluation methods have been proposed to satisfy the practitioner’s concerns, but practitioners still do not adopt these methods. This study employs a systematic literature review with a text analysis of SA’s definitions to propose a comparison framework for SA. It identifies lightweight features and factors to improve the architectural evaluation methods among industrial practitioners. The features are determined based on the practitioner’s concerns by analyzing the architecture’s definitions from stakeholders and reviewing architectural evaluation methods. The lightweight factors are acquired by studying the five most commonly used lightweight methods and the Architecture-based Tradeoff Analysis Method (ATAM), the most well-known heavyweight method. Subsequently, the research addresses these features and factors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.