Bifacial monolithic perovskite/silicon tandem solar cells exploit albedo-the diffuse reflected light from the environment-to increase their performance above that of monofacial perovskite/silicon tandems. Here we report bifacial tandems with certified power conversion efficiencies >25% under monofacial AM1.5G 1 sun illumination that reach power-generation densities as high as ~26 mW cm -2 under outdoor testing. We investigated the perovskite bandgap required to attain optimized current matching under a variety of realistic illumination and albedo conditions. We then compared the properties of these bifacial tandems exposed to different albedos and provide energy yield calculations for two locations with different environmental conditions. Finally, we present a comparison of outdoor test fields of monofacial and bifacial perovskite/silicon tandems to demonstrate the added value of tandem bifaciality for locations with albedos of practical relevance.

Monolithic two-terminal (2T) perovskite/CuInSe 2 (CIS) tandem solar cells (TSCs) combine the promise of an efficient tandem photovoltaic (PV) technology with the simplicity of an all-thin-film device architecture that is compatible with flexible and lightweight PV. In this work, we present the first-ever 2T perovskite/CIS TSC with a power conversion efficiency (PCE) approaching 25% (23.5% certified, area 0.5 cm 2 ). The relatively planar surface profile and narrow band gap (∼1.03 eV) of our CIS bottom cell allow us to exploit the optoelectronic properties and photostability of a low-Br-containing perovskite top cell as revealed by advanced characterization techniques. Current matching was attained by proper tuning of the thickness and bandgap of the perovskite, along with the optimization of an antireflective coating for improved light in-coupling. Our study sets the baseline for fabricating efficient perovskite/CIS TSCs, paving the way for future developments that might push the efficiencies to over 30%.

No abstract

No abstract

Recent advances in solution processing of micrometer-thick perovskite solar cells over textured silicon bottom solar cells allowed a new promising approach for the fabrication of 2T perovskite/silicon tandem photovoltaics, combining optimal light management in the textured bottom cell with the ease of solution processing. Detailed simulations are needed to assess the performances of this morphology configuration (thick perovskite configuration). In this work, in-depth optical and energy yield (EY) simulations are performed to compare the thick perovskite configuration with other relevant morphology configurations for 2T perovskite/silicon tandem photovoltaics. Under standard test conditions, the total photogenerated current of the thick perovskite configuration is 1.3 mA cm−2 lower (−3.4% relative) than the one of the conformal perovskite on textured silicon configuration for non-encapsulated cells and only 0.8 mA cm−2 (−2.1% relative) for encapsulated cells. Under realistic outdoor conditions, EY modelling for a wide range of locations shows that, while conformal perovskite on textured silicon configuration remains the optimal configuration, thick perovskite configuration exhibits a mere ∼2.5% lower annual EY. Finally, intermediate scenarios are investigated with the angle of the perovskite front-side texture differing from the silicon texture and critical angles for efficient light management in these configurations are identified.