No abstract

No abstract

This article describes for the first time the elaboration of a cationic exchange membrane (CEM) from an end-of-life reverse osmosis (RO) membrane. The cationic exchange membrane has been prepared in two successive steps: (i) chlorine attack and (ii) filtration/adsorption of a polystyrene sulfonic acid (PSS) electrolyte solution. Physicochemical characterizations have been undertaken including (Na + ) transference number (t(Na + )), diffusion flux measurements (J s ), cationic exchange capacity (CEC) determinations, as the properties encountered for a classical cationic exchange membrane. The hydraulic permeability (Lp) was also determined to characterize the molecular weight cutoff. This novel membrane denoted as ANIMMAX has also been characterized by ATR-FTIR and SEM/AFM tools. We have utilized an old brackish water membrane denoted BW30 (stocked in bisulfite 1% for 10 years) to develop a new sulfonated UF membrane with a molecular cutoff of 55 kDa. We have observed that the roughness was divided by 2 (295 to 144nm) showing a lower propensity to fouling/biofouling of the novel membrane elaborated. As for the application, the newly synthesized membrane has been tested during 4 days of experiments in a fungal microbial fuel cell laboratory set-up vs Nafion© 117 the usual cationic membrane in MFC technology. We observed a lower external resistance with a value of 8 kOhm vs 37 kOhm for ANIMMAX vs Nafion ® 117, respectively.

No abstract

No abstract