Metal-organic frameworks (MOFs) are crystalline nanoporous materials comprised of organic electron donors linked to metal ions by strong coordination bonds. Applications such as gas storage and separations are currently receiving considerable attention, but if the unique properties of MOFs could be extended to electronics, magnetics, and photonics, the impact on material science would greatly increase. Recently, we obtained "emergent properties," such as electronic conductivity and energy transfer, by infiltrating MOF pores with "guest" molecules that interact with the framework electronic structure. In this Perspective, we define a path to emergent properties based on the Guest@MOF concept, using zinc-carboxylate and copper-paddlewheel MOFs for illustration. Energy transfer and light harvesting are discussed for zinc carboxylate frameworks infiltrated with triplet-scavenging organometallic compounds and thiophene- and fullerene-infiltrated MOF-177. In addition, we discuss the mechanism of charge transport in TCNQ-infiltrated HKUST-1, the first MOF with electrical conductivity approaching conducting organic polymers. These examples show that guest molecules in MOF pores should be considered not merely as impurities or analytes to be sensed but also as an important aspect of rational design.

CdTe and Cd 1-x Zn x Te are the leading semiconductor compounds for both photovoltaic and radiation detection applications. The performance of these materials is sensitive to the presence of atomic-scale defects in the structures. To enable accurate studies of these defects using modern atomistic simulation technologies, we have developed a high-fidelity analytical bond-order potential for the CdTe system. This potential incorporates primary (σ) and secondary (π) bonding and the valence dependence of the heteroatom interactions. The functional forms of the potential are directly derived from quantum-mechanical tight-binding theory under the condition that the first two and first four levels of the expanded Green's function for the σ-and π-bond orders, respectively, are retained. The potential parameters are optimized using iteration cycles that include first-fitting properties of a variety of elemental and compound configurations (with coordination varying from 1 to 12) including small clusters, bulk lattices, defects, and surfaces, and then checking crystalline growth through vapor deposition simulations. It is demonstrated that this CdTe bond-order potential gives structural and property trends close to those seen in experiments and quantum-mechanical calculations and provides a good description of melting temperature, defect characteristics, and surface reconstructions of the CdTe compound. Most importantly, this potential captures the crystalline growth of the ground-state structures for Cd, Te, and CdTe phases in vapor deposition simulations.

The detection and identification of subatomic particles is an important scientific problem with implications for medical devices, radiography, biochemical analysis, particle physics, and astrophysics. In addition, the development of efficient detectors of neutrons generated by fissile material is a pressing need for nuclear nonproliferation efforts. A critical objective in the field of radiation detection is to obtain the physical insight necessary for rational design of scintillation materials. Many factors affect the quantum efficiency and timing of scintillator light output, including chemical composition, electronic structure, interchromophore interactions, crystal symmetry, and atomic density. None of the material types currently used in radiation detection, which include crystalline inorganic compounds such as LaBr 3 :Ce, organic compounds, and plastics, have the inherent synthetic versatility to exert systematic control over these factors. Therefore, it is likely that major advances in radiation detection will require the development of new materials outside the scope of traditional scintillators. Here, we propose that metal-organic frameworks (MOFs) could potentially offer the desired level of structural control, leading to an entirely new class of radiation detection materials.MOFs are crystalline materials consisting of metal clusters linked by coordinating organic groups. Yaghi, O'Keefe, and coworkers have shown that structures resulting from the selfassembly of specific metal ions and linkers can be predicted through an understanding of the geometric nets accessible to particular metal-linker combinations (''reticular chemistry''), [1][2][3]

The exemplary structural versatility and permanent porosity of Metal-Organic Frameworks (MOFs) and their consequent potential for breakthroughs in diverse applications have caused these hybrid materials to become the focus of vigorous investigation. These properties also hold significance for applications beyond those traditionally envisioned for microporous materials, such as radiation detection and other luminescence-based sensing applications. In this contribution we demonstrate that luminescence induced by ionizing radiation (also known as scintillation) is common in appropriately designed MOFs and describe how this property can be harnessed to generate novel materials useful for detecting radiation. Through a diverse selection of MOFs, we explore the structural properties of MOFs that give rise to scintillation and photoluminescence in these materials. These results enable us to define a new structure-based hierarchical system for understanding luminescent properties in MOFs. Finally, we describe some performance metrics for MOF-based scintillation counters, such as luminosity and resistance to radiation damage, and discuss how these materials relate to the current state of the art in scintillation counters.

CdTe and CdTe-based Cd(1-x)Zn(x)Te (CZT) alloys are important semiconductor compounds that are used in a variety of technologies including solar cells, radiation detectors, and medical imaging devices. Performance of such systems, however, is limited due to the propensity of nano- and micro-scale defects that form during crystal growth and manufacturing processes. Molecular dynamics simulations offer an effective approach to study the formation and interaction of atomic scale defects in these crystals, and provide insight on how to minimize their concentrations. The success of such a modeling effort relies on the accuracy and transferability of the underlying interatomic potential used in simulations. Such a potential must not only predict a correct trend of structures and energies of a variety of elemental and compound lattices, defects, and surfaces but also capture correct melting behavior and should be capable of simulating crystalline growth during vapor deposition as these processes sample a variety of local configurations. In this paper, we perform a detailed evaluation of the performance of two literature potentials for CdTe, one having the Stillinger-Weber form and the other possessing the Tersoff form. We examine simulations of structures and the corresponding energies of a variety of elemental and compound lattices, defects, and surfaces compared to those obtained from ab initio calculations and experiments. We also perform melting temperature calculations and vapor deposition simulations. Our calculations show that the Stillinger-Weber parameterization produces the correct lowest energy structure. This potential, however, is not sufficiently transferrable for defect studies. Origins of the problems of these potentials are discussed and insights leading to the development of a more transferrable potential suitable for molecular dynamics simulations of defects in CdTe crystals are provided.