No abstract

A fast and large-area-compatible two-step deposition method for perovskite is developed to achieve over 18% for MAPbI3.

Recent progress in highly efficient perovskite solar cells (PSCs) has been made by virtue of interfacial engineering on 3D perovskite surfaces for their defect control, however, the structural stability of the modified interface against external stimuli still remains unresolved. Herein, 4‐dimethylaminopyridine (DMAP) is introduced to develop a facile technique for selectively passivating the grain boundary (GB) and controlling the topographical boundary of the perovskite surface near the GB. Through the surface treatment of DMAP, strongly bound DMAP crystals are selectively formed at the GB, which serves two functions: nonradiative recombination at GB is effectively reduced by healing the uncoordinated Pb2+ while adhesion strength between the perovskite and the poly(triaryl amine) (PTAA) polymer is significantly enhanced by a mechanical interlock effect. A planar PSC with DMAP treatment exhibits a champion power conversion efficiency of 22.4%, which is not only much higher than the 20.04% observed for a nontreated control device, but also the highest among the planar PSCs using PTAA polymers as a hole transport material. Furthermore, the use of DMAP leads to a substantial improvement in the device stability under damp‐heat test and light irradiation.

In state-of-the-art n-i-p structured perovskite solar cells (PSCs), a dopant for doping hole transporting materials (HTMs) is a crucial component, which not only affects the electrical property of HTMs, but...

The important but remained issue to be addressed to achieve the mass production of perovskite solar modules include a large-area fabrication of high-quality perovskite film with eco-friendly, viable production methods. Although several efforts are made to achieve large-area fabrication of perovskite, the development of eco-friendly solvent system, which is precisely designed to be fit to scale-up methods are still challenging. Herein, this work develops the eco-friendly solvent/co-solvent system to produce a high-quality perovskite layer with a bathing in eco-friendly antisolvent. The new co-solvent/additive, methylsulfonylmethane (MSM), efficiently improves the overall solubility and has a suitable binding strength to the perovskite precursor, resulting in a high-quality perovskite film with antisolvent bathing method in large area. The resultant perovskite solar cells showed high power conversion efficiency of over 24% (in reverse scan), with a good long-term stability under continuous light illumination or damp-heat condition. MSM is also beneficial to produce a perovskite layer at low-temperature or high-humidity. MSM-based solvent system is finally applied to large-area, resulting in highly efficiency perovskite solar modules with PCE of 19.9% (by aperture) or 21.2% (by active area) in reverse scan. These findings contribute to step forward to a mass production of perovskite solar modules with eco-friendly way.