In this study, mass activity of naturally occurring radioactive materials were measured in twenty-three building material samples, use extensively in the area exposed to a high level of natural background radiation (Mahallat, Iran), to determine the radioactivity index and changes to the level of indoor gamma radiation. The mass activity of 232Th, 226Ra and 40K were within the ranges from 18 ± 3 to 44 ± 10 Bq/kg (average of 27 ± 6 Bq/kg), 22 ± 5 to 53 ± 14 Bq/kg (average of 34 ± 6 Bq/kg) and 82 ± 18 to 428 ± 79 Bq/kg (average of 276 ± 58 Bq/kg), respectively. The gamma dose rates for population were estimated between 48 ± 9 and 111 ± 26 nGy/h with exception of radon exhalation from building materials. Since the air kerma rate in the town varies from 0.8 to 4 μGy/h, the attenuation coefficient was calculated for buildings made of the aforementioned materials. Additionally, the annual gamma radiation doses for inhabitants were calculated based on time spent outdoors and indoors.
Impact assessment of building materials is a focused topic in the field of radioecology. A radiological survey has conducted to monitor radioactivity of most common building materials in Semnan Province, Iran, and assess the radiation risk. Activity concentrations of 226Ra, 232Th, and 40K were measured in 29 samples including nine commonly used building materials that were collected from local suppliers and manufacturers, using a high purity germanium gamma-ray detector. The activity concentrations of 226Ra, 232Th, and 40K varied from 6.7±1 to 43.6±9, 5.9±1 to 60±11, and 28.5±3 to 1085±113 Bq kg−1 with averages of 26.8±5, 22.7±4, and 322.4±4 Bq kg−1, respectively. By applying multivariate statistical approach (Pearson correlation, cluster, and principal component analyses (PCA)), the radiological health hazard parameters were analyzed to obtain similarities and correlations between the various samples. The Pearson correlation showed that the 226Ra distribution in the samples is controlled by changing the 232Th concentration. The variance of 95.58% obtained from PCA resulted that the main radiological health hazard parameters exist due to the concentration of 226Ra and 232Th. The resulting dendrogram of cluster analysis also shows a well coincidence with the correlation analysis.
In this study, samples of building material additives were analyzed for naturally occurring radioisotope activity such as uranium, radium, and radon. The radon exhalation and the annual effective doses, were also calculated. The activities of the samples, were determined using HPGe gamma spectrometry and ionization detector. The results were used to calculate dose values by using RESRAD BUILD code. The activity concentration of the samples ranges between 9–494 Bq/kg Ra-226, 1–119 Bq/kg Th-232 and 24–730 Bq/kg K-40. In conclusion the investigated samples can be used safely as building material additives as they do not pose a major risk to humans.
). The thoron emanation features were also calculated from the obtained results (2.9 to 21.2% with an average of 8.6%). The thoron exhalation and emanation properties were compared with the radon exhalation and emanation features determined in a previous study. It was found that there was no correlation between the radon and thoron emanation features, according to the obtained data. This can be explained by the different Ra-224 and Ra-226 distributions in the soil grains. As a result, the thoron emanation factor cannot be predicted from radon emanation and vice versa.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.