In the last decade, research on the synthesis and characterization of nanosized ferrites has highly increased and a wide range of new applications for these materials have been identified. The ability to tailor the structure, chemical, optical, magnetic, and electrical properties of ferrites by selecting the synthesis parameters further enhanced their widespread use. The paper reviews the synthesis methods and applications of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) nanoparticles, with emphasis on the advantages and disadvantages of each synthesis route and main applications. Along with the conventional methods like sol-gel, thermal decomposition, combustion, co-precipitation, hydrothermal, and solid-state synthesis, several unconventional methods, like sonochemical, microwave assisted combustion, spray pyrolysis, spray drying, laser pyrolysis, microemulsion, reverse micelle, and biosynthesis, are also presented. MFe2O4 (M = Co, Cu, Mn, Ni, Zn) nanosized ferrites present good magnetic (high coercivity, high anisotropy, high Curie temperature, moderate saturation magnetization), electrical (high electrical resistance, low eddy current losses), mechanical (significant mechanical hardness), and chemical (chemical stability, rich redox chemistry) properties that make them suitable for potential applications in the field of magnetic and dielectric materials, photoluminescence, catalysis, photocatalysis, water decontamination, pigments, corrosion protection, sensors, antimicrobial agents, and biomedicine.

This paper presents the synthesis of metal doped Co ferrites, M0.2Co0.8Fe2O4 (M = Cu2+, Ni2+, and Zn2+) embedded in SiO2 matrix by an innovative sol-gel route. The structural and morphological characterization provided information about the crystalline phases, crystallite size, and the shape of the prepared ferrites. The thermal study depicted the thermal decomposition and stability of the obtained ferrites. X-ray diffraction indicated nanocrystalline ferrites with spinel structure and the lack of crystalline phase impurities, while Fourier transform infrared spectroscopy revealed the presence of functional groups in precursors and ferrite powders. The lattice parameters showed a gradual increase indicating a uniform distribution of divalent metal ions in the Co ferrite lattice. The crystallite size, magnetic moment, super-exchange and deflection of magnetic domain were influenced by the dopant metal ion. The room temperature magnetization indicated a ferromagnetic behavior of the ferrites annealed at 1000 °C and a superparamagnetic behavior of the ferrites annealed at 700 °C.

The effect of SiO2 embedding on the obtaining of single-phase ferrites, as well as on the structure, morphology and magnetic properties of (Zn0.6Mn0.4Fe2O4)δ(SiO2)100−δ (δ = 0–100%) nanoparticles (NPs) synthesized by sol-gel method was assessed. The phase composition and crystallite size were investigated by X-ray diffraction (XRD), the chemical transformations were monitored by Fourier transform infrared (FT-IR) spectroscopy, while the morphology of the NPs by transmission electron microscopy (TEM). The average crystallite size was 5.3–27.0 nm at 400 °C, 13.7–31.1 nm at 700 °C and 33.4–49.1 nm at 1100 °C. The evolution of the saturation magnetization, coercivity and magnetic anisotropy as a function of the crystallite sizes were studied by vibrating sample magnetometry (VSM) technique. As expected, the SiO2 matrix shows diamagnetic behavior accompanied by the accidentally contribution of a small percent of ferromagnetic impurities. The Zn0.6Mn0.4Fe2O4 embedded in SiO2 exhibits superparamagnetic-like behavior, whereas the unembedded Zn0.6Mn0.4Fe2O4 behaves like a high-quality ferrimagnet. The preparation route has a significant effect on the particle sizes, which strongly influences the magnetic behavior of the NPs.

No abstract

In rural areas without centralized water supply systems, inhabitants often use groundwater of unknown quality as drinking water, without understanding the possible negative consequences on their health. Karstic spring waters from Dobrogea region in Romania were assessed for their potential to be used as drinking water source, according to their quality and seasonal variation. The physico-chemical parameters of waters were compared with the guideline values for drinking water established by the World Health Organization and the Directive 98/83/EC. The nitrate and Cr concentrations exceeded the guideline value in the springs from Southern Dobrogea, but met the quality criteria in those from Northern Dobrogea, thus, to be used as drinking water, the karstic springs located in Southern Dobrogea require treatment for nitrates removal. Heavy metals pollution indices showed low to medium cumulative heavy metal pollution in all springs, while the human health risk assessment by oral exposure indicated possible noncarcinogenic risks of nitrates, both for adults and children in springs from South Dobrogea. A rigorous monitoring of the water quality before human consumption is recommended for all four studied water sources.