No abstract

Grazing incidence X‐ray scattering (GIXS) is used to characterize the morphology of poly(3‐hexylthiophene) (P3HT)–phenyl‐C61‐butyric acid methyl ester (PCBM) thin film bulk heterojunction (BHJ) blends as a function of thermal annealing temperature, from room temperature to 220 °C. A custom‐built heating chamber for in situ GIXS studies allows for the morphological characterization of thin films at elevated temperatures. Films annealed with a thermal gradient allow for the rapid investigation of the morphology over a range of temperatures that corroborate the results of the in situ experiments. Using these techniques the following are observed: the melting points of each component; an increase in the P3HT coherence length with annealing below the P3HT melting temperature; the formation of well‐oriented P3HT crystallites with the (100) plane parallel to the substrate, when cooled from the melt; and the cold crystallization of PCBM associated with the PCBM glass transition temperature. The incorporation of these materials into BHJ blends affects the nature of these transitions as a function of blend ratio. These results provide a deeper understanding of the physics of how thermal annealing affects the morphology of polymer–fullerene BHJ blends and provides tools to manipulate the blend morphology in order to develop high‐performance organic solar cell devices.

Aligned CNT nanocomposites with variable volume fraction, up to 20%, are demonstrated. Biaxial mechanical densification of aligned CNT forests, followed by capillarity-driven wetting using unmodified aerospace-grade polymers, creates centimeter-scale specimens. Characterizations confirm CNT alignment and dispersion in the thermosets, providing a useful platform for controlled nanoscale interaction and nanocomposite property studies that emphasize anisotropy.

Templated self-assembly of block copolymer thin films can generate periodic arrays of microdomains within a sparse template, or complex patterns using 1:1 templates [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16] . However, arbitrary pattern generation directed by sparse templates remains elusive. Here, we show that an array of carefully spaced and shaped posts, prepared by electron-beam patterning of an inorganic resist, can be used to template complex patterns in a cylindrical-morphology block copolymer. We use two distinct methods: making the post spacing commensurate with the equilibrium periodicity of the polymer, which controls the orientation of the linear features, and making local changes to the shape or distribution of the posts, which direct the formation of bends, junctions and other aperiodic features in specific locations. The first of these methods permits linear patterns to be directed by a sparse template that occupies only a few percent of the area of the final self-assembled pattern, while the second method can be used to selectively and locally template complex linear patterns.Microphase separation of a block copolymer thin film can generate dense arrays of microdomains with periodicity as low as $10 nm (refs 6,16-19). Such arrays have been used as lithographic masks to pattern various functional materials, and to create devices including nanocrystal flash memory, nanowire transistors, gas sensors and patterned magnetic recording media [20][21][22][23][24][25] . Block copolymer thin film self-assembly on an unpatterned substrate leads to close-packed arrays of features such as lines or dots that lack long-range order, thus limiting their utility. As a result, both chemical and topographical substrate features have been used to template or guide block copolymer self-assembly, imposing long-range order and generating microdomain geometries not observed in untemplated films [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16] . These templates are often defined using electronbeam lithography (EBL) [3][4][5]7,8,11 , because of its ability to pattern small features of arbitrary geometry. However, the serial nature of EBL makes it clearly advantageous to minimize the density of the EBL-written features required to template a given arrangement of block copolymer microdomains. Even in a production context in which EBL is used only to write a master pattern that is to be replicated by some higher-throughput mechanism (such as nanoimprinting), the time required just to write the master can be prohibitively long. The challenge in template design is therefore to find a set of template features of minimum complexity that will deterministically program the block copolymer to form a desired final pattern, such as an interconnect level in an integrated circuit, which may contain both periodic and aperiodic features.We describe an approach to this problem that uses a sparse array of chemically functionalized topographical posts to control the self-assembly of dense linear block copolymer (BCP) stru...

We explain the evolution and termination of vertically aligned carbon nanotube (CNT) “forests” by a collective mechanism, which is verified by temporal measurements of forest mass and height, as well as quantitative spatial mapping of CNT alignment by synchrotron X-ray scattering. We propose that forest growth consists of four stages: (I) self-organization; (II) steady growth with a constant CNT number density; (III) decay with a decreasing number density; and (IV) abrupt self-termination, which is coincident with a loss of alignment at the base of the forest. The abrupt loss of CNT alignment has been observed experimentally in many systems, yet termination of forest growth has previously been explained using models for individual CNTs, which do not consider the evolution of the CNT population. We propose that abrupt termination of CNT forest growth is caused by loss of the self-supporting structure, which is essential for formation of a CNT forest in the first place, and that this event is triggered by accumulating growth termination of individual CNTs. A finite element model accurately predicts the critical CNT number density at which forest growth terminates and demonstrates the essential role of mechanical contact in maintaining growth of self-assembled films of filamentary nanostructures.

The fastest growth pattern of layer-by-layer (LBL) assembled films is exponential LBL (e-LBL), which has both fundamental and practical importance. It is associated with "in-and-out" diffusion of flexible polymers and thus was considered to be impossible for films containing clay sheets with strong barrier function, preventing diffusion. Here, we demonstrate that e-LBL for inorganic sheets is possible in a complex tricomponent film of poly(ethyleneimine) (PEI), poly(acrylic acid) (PAA), and Na(+)-montmorillonite (MTM). This system displayed clear e-LBL patterns in terms of both initial accumulation of materials and unusually thick individual bilayers later in the deposition process with film thicknesses reaching 200 microm for films composed of 200 pairs of layers. Successful incorporation of MTM layers was observed by scanning electron microscopy and thermo-gravimetric analysis. Surprisingly, the growth rate was found to be nearly identical in films with and without clay layers, which suggests fast permeation/reptation of polyelectrolytes between the nanosheets during the "in-and-out" diffusion of polymer. In considering these findings, e-LBL growth property is expected for a wide array of available inorganic nanoscale components and have a potential to greatly expand the e-LBL field and LBL field altogether. The large thickness and rapid growth of the films affords fast preparation of nanostructured materials which is essential for multiple practical applications ranging from optical devices to ultrastrong composites.

Using grazing incidence X-ray scattering, we observe the effects of solvent vapors upon the morphology of poly(3-hexylthiophene)−phenyl-C 61 -butyric acid methyl ester (P3HT−PCBM) bulk heterojunction thin film blends in real time; allowing us to observe morphological rearrangements that occur during this process as a function of solvent. We detail the swelling of the P3HT crystallites upon the introduction of solvent and the resulting changes in the P3HT crystallite morphology. We also demonstrate the ability for tetrahydrofuran vapor to induce crystallinity in PCBM domains. Additionally, we measure the nanoscale phase segregated domain size as a function of solvent vapor annealing and correlate this to the changes observed in the crystallite morphology of each component. Finally, we discuss the implications of the morphological changes induced by solvent vapor annealing on the device properties of BHJ solar cells.

We study synthesis of vertically aligned carbon nanotube (CNT) "forests" by a decoupled method that facilitates control of the mean diameter and structural quality of the CNTs and enables tuning of the kinetics for efficient growth to forest heights of several millimeters. The growth substrate temperature (T(s)) primarily determines the CNT diameter, whereas independent and rapid thermal treatment (T(p)) of the C(2)H(4)/H(2) reactant mixture significantly changes the growth rate and terminal forest height but does not change the CNT diameter. Synchrotron X-ray scattering is utilized for precise, nondestructive measurement of CNT diameter in large numbers of samples. CNT structural quality monotonically increases with T(s) yet decreases with T(p), and forests grown by this decoupled method have significantly higher quality than those grown using a conventional single-zone tube furnace. Chemical analysis reveals that the thermal treatment generates a broad population of hydrocarbon species, and a nonmonotonic relationship between catalyst lifetime and T(p) suggests that certain carbon species either enhance or inhibit CNT growth. However, the forest height kinetics, as measured in real-time during growth, are self-similar, thereby indicating that a common mechanism of growth termination may be present over a wide range of process conditions.