No abstract

No abstract

A highly sensitive surface plasmon resonance (SPR) sensor on a dual-core photonic crystal fiber (PCF) for low refractive index (RI) detection is presented in this paper. Plasmonic material silver (Ag) is deposited outside of the fiber structure to detect changes of the surrounding medium's refractive index. To prevent oxidation a thin layer of titanium dioxide (TiO 2) is employed on top of the silver. The sensor shows maximum wavelength sensitivity and amplitude sensitivity of 116,000 nm/RIU and 2452 RIU −1 with corresponding resolutions (R) of 8.62 × 10 −7 and 5.55 × 10 −6 RIU, respectively. A thorough study of the relevant literature yielded that these attained sensitivities in both interrogation methods are the highest among reported PCF-SPR sensors to date. In addition, the sensor possesses a very high figure of merit of 2320 in the sensing range of 1.29 to 1.39. Therefore, it would be a suitable candidate for pharmaceutical inspection, organic chemical sensing, and biosensing and other analytes detection.

No abstract

In this paper, a low-loss, spiral lattice photonic crystal fiber (PCF)-based plasmonic biosensor is proposed for its application in detecting various biomolecules (i.e., sugar, protein, DNA, and mRNA) and biochemicals (i.e., serum and urine). Plasmonic material gold (Au) is employed externally to efficiently generate surface plasmon resonance (SPR) in the outer surface of the PCF. A thin layer of titanium oxide (TiO2) is also introduced, which assists in adhering the Au layer to the silica fiber. The sensing performance is investigated using a mode solver based on the finite element method (FEM). Simulation results show a maximum wavelength sensitivity of 23,000 nm/RIU for a bio-samples refractive index (RI) detection range of 1.32–1.40. This sensor also exhibits a very low confinement loss of 0.22 and 2.87 dB/cm for the analyte at 1.32 and 1.40 RI, respectively. Because of the ultra-low propagation loss, the proposed sensor can be fabricated within several centimeters, which reduces the complexity related to splicing, and so on.

In this work, a highly sensitive dual-core configured microchannel-based plasmonic refractive index (RI) sensor was investigated, which can be used for low RI detection. Both the sensing layer and the plasmonic material layer were built outside of the fiber design to detect the surrounding medium’s RI changes. Additionally, the effects of different plasmonic materials gold (Au), silver (Ag), and copper (Cu) toward sensitivity were investigated for the same structure. An adhesive agent was used in this work, titanium dioxide (TiO2), and was coated on top of the plasmonic material to prevent the oxidation of Ag and Cu. The coupling strength between the fundamental mode and the surface plasmon polariton (SPP) mode was observed to be very strong due to the TiO2 adhesive agent. With a resolution of 7.41 × 10−7 RIU, maximum wavelength sensitivity (WS) of 135,000 nm/RIU and amplitude sensitivity (AS) of 3239 RIU−1 were achieved using the proposed sensor while using Au as a plasmonic material for an analyte RI range of 1.29–1.39. A detailed study of relevant literature revealed that the achieved wavelength sensitivity for plasmonic material gold (Au) is the highest among reported photonic crystal fiber (PCF)-surface plasmon resonance (SPR) sensors to date.

No abstract

In this paper, an extremely sensitive Photonic Crystal Fiber (PCF) based Surface Plasmon Resonance (SPR) sensor having D-shaped structure has been proposed. Gold has been used as the plasmonic material, and it has been coated outside of the fiber on its glassy surface to detect the change in the refractive index of the surrounding medium. Gold has been chosen as it is chemically stable and has no impact on the surrounding aqueous medium. Maximum Wavelength Sensitivity (WS) of 216,000 nm/RIU and Amplitude Sensitivity (AS) of 1680 RIU -1 have been achieved for the analyte refractive index range 1.23 to 1.42 by the proposed sensor. After conducting a detailed literature review in the relevant field, it has been revealed that the proposed sensor possesses the highest wavelength sensitivity among recently reported PCF-SPR sensors to this date. The proposed sensor also exhibits a resolution of 4.63×10 -7 RIU and FOM of 1200. Consequently, the proposed sensor can become an ideal candidate in the field of biomedical sensing, chemical sensing, and other lower RI analytes sensing.