The reproducibility and sensitivity of 36 methods for quantifying the genetic signal of SARS-CoV-2 in wastewater was evaluated in a nationwide interlaboratory assessment in the U.S.

In response to COVID-19, the international water community rapidly developed methods to quantify the SARS-CoV-2 genetic signal in untreated wastewater. Wastewater surveillance using such methods has the potential to complement clinical testing in assessing community health. This interlaboratory assessment evaluated the reproducibility and sensitivity of 36 standard operating procedures (SOPs), divided into eight method groups based on sample concentration approach and whether solids were removed. Two raw wastewater samples were collected in August 2020, amended with a matrix spike (betacoronavirus OC43), and distributed to 32 laboratories across the U.S. Replicate samples analyzed in accordance with the project's quality assurance plan showed high reproducibility across the 36 SOPs: 80% of the recovery-corrected results fell within a band of +/- 1.15-log10 genome copies/L with higher reproducibility observed within a single SOP (standard deviation of 0.13-log10). The inclusion of a solids removal step and the selection of a concentration method did not show a clear, systematic impact on the recovery-corrected results. Other methodological variations (e.g., pasteurization, primer set selection, and use of RT-qPCR or RT-dPCR platforms) generally resulted in small differences compared to other sources of variability. These findings suggest that a variety of methods are capable of producing reproducible results, though the same SOP or laboratory should be selected to track SARS-CoV-2 trends at a given facility. The methods showed a 7-log10 range of recovery efficiency and limit of detection highlighting the importance of recovery correction and the need to consider method sensitivity when selecting methods for wastewater surveillance.

No abstract

Chemical disinfectants employed in water and wastewater treatment can produce a variety of transformation products, including carbonyl compounds (e.g., saturated and unsaturated aldehydes and ketones). Experiments conducted under conditions relevant to chlorination at drinking water treatment plants and residual chlorine application in distribution systems indicate that α,β-unsaturated carbonyl compounds readily react with free chlorine and free bromine over a wide pH range but react slowly with combined chlorine (i.e., NH 2 Cl). For nearly all of the 11 α,β-unsaturated carbonyl compounds studied, the apparent second-order rate constants for the reaction with free chlorine increased in a linear manner with hypochlorite (OCl − ) concentrations, yielding species-specific second-order rate constants for the reaction with OCl − ranging from 0.21 to 12 M −1 s −1 . Predictions based on the second-order rate constants indicate that a substantial fraction (i.e., >60%) of several of the more prominent α,β-unsaturated carbonyls (e.g., acrolein, crotonaldehyde) will be transformed to an appreciable extent in distribution systems by free chlorine. Products from the reaction of chlorine with acrolein, crotonaldehyde, and methyl vinyl ketone were tentatively identified using nuclear magnetic resonance (NMR) and gas chromatography coupled to high-resolution time-of-flight mass spectrometry (GC−HRT-MS). These products lacked unsaturated carbons and, in some cases, contained multiple halogens.