The hydrodynamic performance of ships may be improved by the retrofit of Energy Saving Devices (ESDs). These devices are typically seen in the aft part of the ship hull and act by lowering the ship resistance, conditioning the fluid in front of the propeller and/or recovering energy from the rotational swirl of the fluid leaving the propeller. In the case of a retrofit of an existing ship no straight forward solution exists. In order to find a beneficial design that will improve hydrodynamic performance, a successful and accurate initial assessment of the flow around a hull is of the most importance. Once the flow around the hull is scrutinized in detail, and required flow changes are determined, a ship designer can progress with designing an Energy Saving Device specifically tailored to have a desired effect. This paper presents a high quality numerical evaluation of the flow around a ship hull in the full scale using a sophisticated DES model that was successfully validated against the sea trials. The findings from the numerical analysis will identify the potential improvements in the hydrodynamic performance of the ship that could be achieved by ESD.
Existing recommended practices in the literature do not provide clear and concise guidance for the selection of the most suitable numerical modelling strategy for investigating the boundary layer around a ship at full scale. For example, the International Towing Tank Conference procedure for calculating the nominal wake fields of full-scale ships does not clearly specify which turbulence modelling approach should be used to accurately represent the near-wall flow in the ship’s aft region.This paper presents a numerical approach that can accurately represent the boundary layer of full-scale ships. Three turbulence modelling strategies, suitable for the simulation of ship flows, have been assessed: k-ε, k-ω SST RANS and an IDDES formulation. Results from each method have been compared against the full-scale ship propeller torque data of the MV Regal, a 138m long general cargo vessel. Additionally, the capability of each turbulence strategy to resolve time-dependent features of the flow, such as the bilge vortex and its effect on the boundary layer velocity fields, has been evaluated.The results from this investigation show that the IDDES based numerical model replicated the sea trials measurements with the highest degree of accuracy. Furthermore, this study confirmed that the choice of turbulence strategy has a major impact on the full-scale velocity fields in the aft region of a ship.
This article presents a detailed numerical flow assessment of the boundary layer and wake of a full-scale cargo ship. The assessment was conducted using a sophisticated numerical approach that is able to resolve large turbulent scale vortices contained in the flow. The physical flow features of the boundary layer and wake investigated include mean-velocity, near-wall shear stress and vorticity fields. Also, the evolution of the wake from the thick boundary layer over the stern is displayed and analysed in the highest possible detail. Additionally, the detailed information extracted from the boundary layer and wake was the primary input to assess the overall hydrodynamic efficiency of the full-scale general cargo ship. The analysis method followed during this work has been a determinant factor for fast and efficient design of energy saving devices, propellers or rudders that work within the limits of the boundary layer of a ship. In particular, this thorough analysis avoided the necessity to use the commonly used practice of trial and error that is typically followed in the maritime industry.
Existing recommended practices in the literature do not provide clear and concise guidance for the selection of the most suitable numerical modelling strategy for investigating the boundary layer around a ship at full scale. For example, the International Towing Tank Conference procedure for calculating the nominal wake fields of full-scale ships does not clearly specify which turbulence modelling approach should be used to accurately represent the near-wall flow in the ship's aft region. This paper presents a numerical approach that can accurately represent the boundary layer of fullscale ships. Three turbulence modelling strategies, suitable for the simulation of ship flows, have been assessed: k-ε, k-ω SST RANS and an IDDES formulation. Results from each method have been compared against the full-scale ship propeller torque data of the MV Regal, a 138m long general cargo vessel. Additionally, the capability of each turbulence strategy to resolve time-dependent features of the flow, such as the bilge vortex and its effect on the boundary layer velocity fields, has been evaluated. The results from this investigation show that the IDDES based numerical model replicated the sea trials measurements with the highest degree of accuracy. Furthermore, this study confirmed that the choice of turbulence strategy has a major impact on the full-scale velocity fields in the aft region of a ship.
Global warming and rising sea levels are increasingly causing major problems for low lying Pacific and Indian Ocean island nations. This paper describes a sustainable artificial island, designed for the inhabitants of South Tarawa, a coral atoll in the South Pacific and the capital island of the Republic of Kiribati. Design targets were to improve infrastructure, services and quality of life for the inhabitants, to increase island sustainability and to minimise construction costs. Transition to an artificial island is a feasible option with significant international support, and would enable survival for the population of South Tarawa with minimum disruption to their current lifestyle.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.