This work aims the development of a compact spinner to be used inside the glove-box chamber to deposition of polymeric thin films used in the build of OLED devices. Initially, ten fans extracted of microcomputers were tested with commercial multi-voltage power supply. Four fans were selected based on the standard deviation of speed. A variable power supply was also built in order to get a more detailed response in terms of electrical current and speed in function of applied voltage. The fan that showed less variation of speed with applied voltage was selected for deposition tests using polymeric photoresist solution on the ITO (indium tin oxide) coated glass. This polymer was deposited by spin-coating at different speeds: 1000, 2000, 3000 and 4000 rpm and dried for the thicknesses measurement revealing good uniformity. Finally, three OLED devices were assembled with 2000 and 3000 rpm and the layers were dried under the same conditions. In the structure of the devices were used the materials deposited layer-by-layer: glass/ITO/PEDOT: PSS/Polyfluorene (PFpf)/Al. The OLED devices revealed blue light electroluminescence. The I-V curves showed better performance for OLED devices mounted at 2000 rpm with higher current density and similar appearance to the diode curve.
INFLUENCE OF DIFFERENT SOLVENTS USED IN FILM DEPOSITION OF POLY(9-VINYLCARBAZOLE) IN OLEDDEVICES. This work studies the influence of the film deposition process on light emission performance and on threshold voltage of OLEDs, with architecture glass/ITO/PEDOT:PSS/PVK/Alq 3 /Al. The commercial PVK was dissolved in different solvents such as: chloroform, tetrahydrofuran, 1,2,4-trichlorobenzene and trimethylpentane. OLEDs were characterized by current-voltage and revealed a significant influence of the solvents, although all devices emitted green electroluminescence. A difference in threshold voltage up to 10 V was observed among OLEDs prepared from different solvents. The 1,2,4-trichlorobenzene showed best performance, presenting lowest treshold voltage (≈ 6 V), followed by tetrahydrofuran (≈ 8 V), trimethylpentane (≈ 14 V) and chloroform (≈ 16 V).Keywords: organic solvent; PVK; OLED. INTRODUÇÃOO fenômeno de emissão de luz, também chamado de eletroluminescência, em dispositivos OLEDs (diodos orgânicos emissores de luz) foi observado pela primeira vez por volta de 1960, em uma experiência envolvendo campos elétricos em cristais de antraceno. 1 Como esses dispositivos apresentavam elevadas tensões de limiar e baixa eficiência, a utilização de materiais orgânicos na fabricação de dispositivos foi praticamente descartada por, pelo menos, duas décadas. Após esse período, a utilização de diferentes estruturas orgânicas na fabricação dos dispositivos voltou a impulsionar as pesquisas relacionadas ao assunto, pois foi verificada uma melhoria na eficiência quando comparado com os dispositivos produzidos anteriormente, dado que a tensão de operação destes foi diminuída significativamente. 2 Paralelamente ao avanço das pesquisas em dispositivos orgânicos ocorrera também o estudo das propriedades eletrônicas de polímeros conjugados, que data do final da década 70, com o advento dos polímeros condutores. 3 Nas décadas seguintes, a descoberta de novos polímeros com propriedades eletrônicas interessantes, sob o ponto de vista comercial, fez com que aumentasse o interesse pela aplicação destes materiais em dispositivos eletroluminescentes. No início da década de 90 surge o primeiro diodo emissor de luz com camada ativa completamente polimérica. Este fato mostrou de modo consolidado o caminho da pesquisa em dispositivos poliméricos. 4 Atualmente, apesar dos avanços alcançados nesta área, alguns pontos específicos ainda não estão completamente esclarecidos, dentre os quais podem ser citados: o mecanismo de transporte e de injeção de portadores de carga elétrica, o processo de recombinação das cargas elétricas para a emissão de luz, os mecanismos de degradação e os fatores que influenciam na eficiência, bem como a influência do processamento de materiais utilizados na construção de um dispositivo OLED.Portanto, o estudo das propriedades eletrônicas destes materiais pode resultar não somente em melhoria no desempenho, como também aprimorar novas configurações de dispositivos.As publicações mais recentes sobre dispositivos OLEDs forne...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.