Nanocomposites of polypropylene (PP) and PP-grafted-maleic anhydride (PP-g-MA) with and without organophilic vermiculite (OVMT) (5-8%w/w) were evaluated. The nanocomposites and neat PP were submitted to extrusion reprocessing cycles. It was found that the presence of OVMT in PP/PP-g-MA was critical for maintaining thermal stability during reprocessing. The exfoliation/intercalation was confirmed, mainly, in the nanocomposite submitted to reprocessing cycles, by X-ray diffraction. The melt flow index (MFI) values for the 3× and 5× reprocessed PP increased by 40% and 70%, respectively, as compared to the neat PP. The MFI for the 3× and 5× reprocessed PP/PP-g-MA/OVMT decreased 26% and 17%, respectively, as compared to the decrease occurred in the 3× and 5× reprocessed PP, indicating that the presence of 5% (w/w) OVMT was sufficient to allow an increase in viscosity. The reprocessed nanocomposites exhibited values for tensile and flexural strengths and Izod impact, in general, greater than or near to those of PP with the same number of reprocessing cycles. The increase or maintenance of mechanical properties seems to depend on a balance between the extent of intercalation/exfoliation and dispersion of OVMT in the PP matrix, and the degree of degradation of the PP matrix. POLYM. ENG. SCI., 59:2110-2120
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.