In our work we studied composites of poly(lactic) acid (PLA) and low density polyethylene filled with cellulose fibres. The studied composite materials were manufactured with a twin-screw extruder. The extruded compound was processed in to samples using compression moulding. The content of cellulose in polymer/cellulose composites was varied. Effect of low amounts of cellulose on the rheological and tensile properties was studied. Tensile tests showed that the incorporation of cellulose into PLA matrix lead to stiffer but slightly more brittle and weaker materials, since Young's modulus increases and tensile strength and elongation at break slightly decrease. Mechanical results are in agreement with rheological behaviour: the composites exhibit the improvement in the storage and loss moduli of composites compared with that of matrix polymers. The composite dynamic viscosity increases with cellulose content in the same manner as loss and storage moduli. The processing and material properties of PLA/cellulose composites were compared to the more commonly used low-density-polyethylene/cellulose composites.
Owing to its high conductivity, graphene has been incorporated into polymeric nanofibers to create advanced materials for flexible electronics, sensors and tissue engineering. Typically, these graphenebased nanofibers are prepared by electrospinning synthetic polymers, whereas electrospun graphenebiopolymer nanofibers have been rarely reported due to the poor compatibility of graphene with biopolymers. Herein, we report a new method for the preparation of graphene-biopolymer nanofibers using the judicious combination of an ionic liquid and electrospinning. Cellulose acetate (CA) has been used as the biopolymer, graphene oxide (GO) nanoparticles as the source of graphene and 1-butyl-3methylimidazolium chloride ([BMIM]Cl) as the ionic liquid (IL) to create CA-[BMIM]Cl-GO nanofibers by electrospinning for the first time. Moreover, we developed a new route to convert CA-[BMIM]Cl-GO nanofibers to reduced GO nanofibers using hydrazine vapor under ambient conditions to enhance the conductivity of the hybrid nanofibers. The graphene sheets were shown to be uniformly *
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.