Amaç: Bu çalışmada, eczacılık ve eczane teknikerliği öğrencilerinin meslekler arası simülasyon uygulaması ile bir araya getirilerek birbirlerini tanımaları ve bu uygulamaya ilişkin ilgili görüşlerinin belirlenmesi amaçlanmıştır. Gereç ve Yöntem: Çalışma kapsamında, 27 eczacılık ve 51 eczane teknikerliği öğrencisinin katıldığı standart hasta görüşmeleri gerçekleştirilmiştir. Görüşme sonrasında öğrencilerin yazılı geri bildirimleri alınarak nitel bulgular betimsel analiz aşamalarına uygun bir şekilde, MaxQDA v11 ile analiz edilmiştir. Sonuç ve Tartışma: Bu bulgular doğrultusunda “Eczane içi etkileşim”, “Görev paylaşımı”, “Eğitim çıktıları” ve “Fiziksel imkanlar” temaları ortaya çıkmıştır. Eczacılık alanındaki benzer çalışmalarla örtüşen bulguların elde edildiği bu çalışmada, öğrencilerin değerlendirmelerinin, mezuniyet sonrasındaki teknikerler ile olan işbirliğinin temellerinin atılması açısından önemli olduğu düşünülmektedir. Bununla birlikte, çalışmamızın elde edilen sonuçları ışığında, eğitim programında yapılan güncellemelerin mesleki uygulamalara olumlu katkıları olacağına inanılmaktadır.
Plastics, which have a wide range in terms of production method, have also replaced traditional materials because their chemical and physical properties can be changed in the desired direction. The structural changes that occur when functional filler-additives are used during production cause improvements in many physical properties of the new plastic obtained. The use of boron and boron compounds as additives positively affects the mechanical, thermal, electrical, optical and physical properties of the polymer composite. As it is known, plastics, which are flammable by nature, have a low oxygen index and therefore pose a danger to human life and the environment due to the threat of fire. In this study, the effects of zinc borate, which has flame retardant property, on the physical and morphological properties of polypropylene were investigated. In addition, the effects of aging were investigated by UV aging at 70C for 15 and 30 days on the polymer composites produced in the study. PP/ZnB polymer composites with different concentrations (5, 10, 15, 20%) were produced in a twin screw extruder to provide a more homogeneous mixture. Test samples of polymer composites, which were brought into granule form with the help of a grinder, were successfully molded in the injection machine. Limit oxygen index (LOI) to examine the flaming behavior of the samples, heat deflection temperature (HDT), Vicat softening point, melt flow index (MFI) test to examine the thermal behavior, moisture content and density test to examine the physical properties of the samples were performed. The microstructure examination of polymer composites was made with a scan electron microscope (SEM).
Ülkemizde demir-çelik üretimi esnasında her yıl tonlarca ağırlıkta tufal oluşmaktadır. Son yıllarda demir-çelik tüketim miktarındaki artış, hammadde kaynaklarındaki azalmayı beraberinde getirmiştir ve bu yüzden yapısında yüksek oranda demir barındıran tufale karşı ilgiyi arttırmıştır. Yeniden ergitilme veya redüksiyon gibi farklı uygulamalarda değerlendirilebilen tufalin hammadde olarak kullanımı geri kazanım adına farklı bir alan oluşturmaktadır. Bu çalışmada katkı maddesi olarak kullanılan çelik tufalinin akrilonitril bütadien stiren (ABS) polimer matris üzerindeki fiziksel etkileri incelenmiştir. Tufal, çelik kütük üzerinden püskürtme ile ayrıştırıldığından farklı boyutlarda olurlar. Bu sebeple öğütücü ile toz haline getirilen çelik tufali, ABS ile homojen bir karışım elde etmek için ekstrüde edilmiştir. Standartlara uygun boyutlardaki test numuneleri enjeksiyon makinesinde kalıplanarak kompozitlerin yoğunluk, aşınma, ısıl çarpılma sıcaklığı (HDT), vicat yumuşama sıcaklığı, erime akış indeksi (MFI), nem, sertlik testleri ve taramalı elektron mikroskobu (SEM) ile mikroyapı incelemesi yapılmıştır. Deney sonuçlarına göre; tufal ilavesiyle aşınma oranının düştüğü fakat tufal oranının artışıyla birlikte aşınma oranında bir atış görülmüştür. Ayrıca tufal ilavesi ile yoğunluk, vicat yumuşama sıcaklığını, ısıl çarpılma sıcaklığı değeri artmış buna karşılık nem emme ve erime akış indeksi değerlerinde ise düşüş tespit edilmiştir.
Bu çalışmada; yüksek yoğunluklu polietilen (YYPE) içerisine %5 oranında çinko borat ve farklı oranlarda grafen tozları katılarak bir kompozit üretilmiştir. Kompoziti oluşturan malzemeler çift vidalı ekstrüzyon makinesinde karıştırılarak beş farklı grup elde edilmiştir ve enjeksiyon makinası kullanılarak standart test numuneleri üretilmiştir. Mekanik değerleri belirlemek için çekme, sertlik ve darbe testleri yapılmıştır. Ayrıca çinko borat ve grafenin dağılımlarını belirlemek için taramalı elektron mikroskobisi (SEM) ile fotoğrafları çekilmiştir. Analizler sonucunda YYPE içerisinde çinko borat ve grafen toz ilavesiyle; elastiklik modülü, çekme mukavemeti, kopma mukavemeti ve sertlik değerlerinin arttığı diğer taraftan darbe mukavemeti kopma uzaması ve kopma uzaması değerlerinin ise düştüğü tespit edilmiştir. SEM inceleme sonucu çinko borat ve grafen tozlarının homojen dağıldığı tespit edilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.