Two-dimensional, meso-resolved numerical simulations are performed to investigate the complete shock-to-detonation transition (SDT) process in a mixture of liquid nitromethane (NM) and air-filled, circular cavities. The shock-induced initiation behaviors resulting from the cases with neat NM, NM with an array of regularly spaced cavities, and NM with randomly distributed cavities are examined. For the case with randomly distributed cavities, hundreds of cavities are explicitly resolved in the simulations using a diffuse-interface approach to treat two immiscible fluids and GPUenabled parallel computing. Without invoking any empirically calibrated, phenomenological models, the reaction rate in the simulations is governed by Arrhenius kinetics. For the cases with neat NM, the resulting SDT process features a superdetonation that evolves from a thermal explosion after a delay following the passage of the incident shock wave and eventually catches up with the leading shock front. For the cases wherein mesoscale heterogeneities are explicitly considered, a gradual SDT process is captured. These two distinct initiation behaviors for neat NM and heterogeneous NM mixtures agree with experimental findings. Via examining the global reaction rate of the mixture, a unique time scale characterizing the SDT process, i.e., the overtake time, is measured for each simulation. For an input shock pressure less than approximately 9.4 GPa, the overtake time resulting from a heterogeneous mixture is shorter than that for neat NM. This sensitizing effect is more pronounced for lower input shock pressures. A random distribution of cavities is found to be more effective in enhancing the SDT process than a regular array of cavities. Statistical analysis on the meso-resolved simulation data provides more insights into the mechanism of energy release underlying the SDT process. Possible directions towards a quantitatively better agreement between the experimental and meso-resolved simulation results are discussed. arXiv:1905.05727v2 [physics.comp-ph]
The effectiveness of chemotherapy in cancer cell regression is often limited by drug resistance, toxicity, and neoplasia heterogeneity. However, due to the significant complexities entailed by the many cancer growth processes, predicting the impact of interference and symmetry-breaking mechanisms is a difficult problem. To quantify and understand more about cancer drug pharmacodynamics, we combine in vitro with in silico cancer models. The anti-proliferative action of selected cytostatics is interrogated on human colorectal and breast adenocarcinoma cells, while an agent-based computational model is employed to reproduce experiments and shed light on the main therapeutic mechanisms of each chemotherapeutic agent. Multiple drug administration scenarios on each cancer cell line are simulated by varying the drug concentration, while a Bayesian-based method for model parameter optimisation is employed. Our proposed procedure of combining in vitro cancer drug screening with an in silico agent-based model successfully reproduces the impact of chemotherapeutic drugs in cancer growth behaviour, while the mechanisms of action of each drug are characterised through model-derived probabilities of cell apoptosis and division. We suggest that our approach could form the basis for the prospective generation of experimentally-derived and model-optimised pharmacological variables towards personalised cancer therapy.
We present a numerical study of detonation propagation in unconfined explosive charges shaped as an annular arc (rib). Steady detonation in a straight charge propagates at constant speed but when it enters an annular section, it goes through a transition phase and eventually reaches a new steady state of constant angular velocity. This study examines the speed of the detonation wave along the annular charge during the transition phase and at steady state, as well as its dependence on the dimensions of the annulus. The system is modeled using a recently proposed diffuse-interface formulation which allows for the representation of a twophase explosive and of an additional inert material. The explosive considered is the polymer-bonded TATB-based LX-17 and is modeled using two JWL equations of state and the Ignition and Growth reaction rate law. Results show that steady state speeds are in good agreement with experiment. In the transition phase, the evolution of outer detonation speed deviates from the exponential bounded growth function suggested by previous studies. We propose a new description of the transition phase which consists of two regimes. The first is caused by local effects at the outer edge of the annulus and leads to a dependence of outer detonation speed on angular position along the arc. The second regime is induced by effects originating from the inner edge of the annular charge and leads to the deceleration of the outer detonation until steady state is reached. The study concludes with a parametric study where the dependence of the steady state and the transition phase on the dimensions of the annulus is investigated.
Detonators are explosive devices used for the initiation of secondary explosives in commercial and military applications. They are characterized by their initiating capability which is a critical factor for their safe and effective use but challenging to assess accurately. In this two-part study, we employ numerical simulations to investigate the blast wave generated by detonators and examine their initiating capability. The first part follows the European underwater test which evaluates detonators in isolation (direct method). The second part, presented here, investigates detonators placed within a receiving explosive charge (indirect method). Specifically, the detonator is placed inside a booster device which contains secondary explosive and together form an initiating system used to ignite mining blastholes.The physical system is modeled using a multiphysics methodology to accurately capture the response of the materials present in the configuration (explosives, metals and fluids). The reactive model is extended to account for shock desensitization where explosives become more difficult to initiate after the passage of weak shock waves. The variability of the blast wave generated by detonators, observed in the first part of the study, can lead to partial desensitization resulting in pockets of unreacted explosive which inhibit booster initiation and performance. The computational implementation is extensively validated and calibrated against experiment before employed for the study of booster initiation by a range of detonators. Results show that the booster is susceptible to shock desensitization which occurs in varying degrees for different types of detonators and can significantly impact the performance of the initiating system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.