Mg metal is a promising anode material for next generation rechargeable battery due to its dendrite-free deposition and high capacity. However, the best cathode for rechargeable Mg battery was based on high molecular weight MgxMo3S4, thus rendering full cell energetically uncompetitive. To increase energy density, high capacity cathode material like sulfur is proposed. However, to date, only limited work has been reported on Mg/S system, all plagued by poor reversibility attributed to the formation of electrochemically inactive MgSx species. Here, we report a new strategy, based on the effect of Li(+) in activating MgSx species, to conjugate a dendrite-free Mg anode with a reversible polysulfide cathode and present a truly reversible Mg/S battery with capacity up to 1000 mAh/gs for more than 30 cycles. Mechanistic insights supported by spectroscopic and microscopic characterization strongly suggest that the reversibility arises from chemical reactivation of MgSx by Li(+).

Hierarchical nanostructures have generated great interest in the energy, materials, and chemical sciences due to the synergic properties of their composite architectures. Herein, a hierarchical MnO₂ nanofibril/nanowire array is successfully synthesized. The structure consists of a conformal layer of MnO₂ nanofibrils evenly distributed on the surface of the individual MnO₂ nanowires. The synthetic mechanism of this hierarchical structure is characterized by electrochemical measurements, Raman spectroscopy, EELS, and electron microscopy. This material was then investigated at slow scan rates for its charge storage mechanisms in different solvents. In aqueous electrolyte, the nanofibrils show a capacitance almost purely dedicated to double-layer and surface adsorption processes, while in an acetonitrile electrolyte, the nanofibrils' capacitance comes mainly from a cation insertion process. This material was also tested at high scan rates in aqueous solution for its practical supercapacitor capabilities. The material shows a large capacitance of 298 F/g at 50 mV/s and 174 F/g at 250 mV/s. It also maintains 85.2% of its capacitance after 1000 cycles. The material also displays easily controllable parameters such as nanowire length, nanowire diameter, and amount of nanofibril material which is shown here to affect the capacitance dramatically.

A single nanopore structure that embeds all components of an electrochemical storage device could bring about the ultimate miniaturization in energy storage. Self-alignment of electrodes within each nanopore may enable closer and more controlled spacing between electrodes than in state-of-art batteries. Such an 'all-in-one' nanopore battery array would also present an alternative to interdigitated electrode structures that employ complex three-dimensional geometries with greater spatial heterogeneity. Here, we report a battery composed of an array of nanobatteries connected in parallel, each composed of an anode, a cathode and a liquid electrolyte confined within the nanopores of anodic aluminium oxide, as an all-in-one nanosize device. Each nanoelectrode includes an outer Ru nanotube current collector and an inner nanotube of V₂O₅ storage material, forming a symmetric full nanopore storage cell with anode and cathode separated by an electrolyte region. The V₂O₅ is prelithiated at one end to serve as the anode, with pristine V₂O₅ at the other end serving as the cathode, forming a battery that is asymmetrically cycled between 0.2 V and 1.8 V. The capacity retention of this full cell (relative to 1 C values) is 95% at 5 C and 46% at 150 C, with a 1,000-cycle life. From a fundamental point of view, our all-in-one nanopore battery array unveils an electrochemical regime in which ion insertion and surface charge mechanisms for energy storage become indistinguishable, and offers a testbed for studying ion transport limits in dense nanostructured electrode arrays.

Cellulose fibers with porous structure and electrolyte absorption properties are considered to be a good potential substrate for the deposition of energy material for energy storage devices. Unlike traditional substrates, such as gold or stainless steel, paper prepared from cellulose fibers in this study not only functions as a substrate with large surface area but also acts as an interior electrolyte reservoir, where electrolyte can be absorbed much in the cellulose fibers and is ready to diffuse into an energy storage material. We demonstrated the value of this internal electrolyte reservoir by comparing a series of hierarchical hybrid supercapacitor electrodes based on homemade cellulose paper or polyester textile integrated with carbon nanotubes (CNTs) by simple solution dip and electrodeposited with MnO2. Atomic layer deposition of Al2O3 onto the fiber surface was used to limit electrolyte absorption into the fibers for comparison. Configurations designed with different numbers of ion diffusion pathways were compared to show that cellulose fibers in paper can act as a good interior electrolyte reservoir and provide an effective pathway for ion transport facilitation. Further optimization using an additional CNT coating resulted in an electrode of paper/CNTs/MnO2/CNTs, which has dual ion diffusion and electron transfer pathways and demonstrated superior supercapacitive performance. This paper highlights the merits of the mesoporous cellulose fibers as substrates for supercapacitor electrodes, in which the water-swelling effect of the cellulose fibers can absorb electrolyte, and the mesoporous internal structure of the fibers can provide channels for ions to diffuse to the electrochemical energy storage materials.

Magnesium batteries have been considered to be one of the promising beyond lithium ion technologies due to magnesium's abundance, safety, and high volumetric capacity. However, very few materials show reversible performance as a cathode in magnesium ion systems. We present herein the best reported cycling performances of MnO2 as a magnesium battery cathode material. We show that the previously reported poor Mg(2+) insertion/deinsertion capacities in MnO2 can be greatly improved by synthesizing self-standing nanowires and introducing a small amount of water molecules into the electrolyte. Electrochemical and elemental analysis results revealed that the magnitude of Mg(2+) insertion into MnO2 highly depends on the ratio between water molecules and Mg(2+) ions present in the electrolyte and the highest Mg(2+) insertion capacity was observed at a ratio of 6H2O/Mg(2+) in the electrolyte. We demonstrate for the first time, that MnO2 nanowire electrode can be "activated" for Mg(2+) insertion/deinsertion by cycling in water containing electrolyte resulting in enhanced reversible Mg(2+) insertion/deinsertion even with the absence of water molecules. The MnO2 nanowire electrode cycled in dry Mg electrolyte after activation in water-containing electrolyte showed an initial capacity of 120 mA h g(-1) at a rate of 0.4 C and maintained 72% of its initial capacity after 100 cycles.