Resin akrilik yang dipolimerisasi panas (RAPP) telah banyak digunakan sebagai bahan dasar gigi tiruan karena memiliki kelebihan seperti keadaan biokompatibel, jauh lebih estetis, mudah diproses, tidak memerlukan keahlian laboratorium untuk memperbaiki dan harganya relatif murah. Namun, RAPP adalah bahan dasar gigi tiruan yang mudah patah karena kekuatan impak dan transversal yang rendah. Kekuatan impak dan transversal dapat ditingkatkan dengan penambahan bahan penguat nanopartikel zirkonium oksida (ZrO2). Penelitian ini bertujuan untuk mengetahui pengaruh penambahan nanopartikel ZrO2 konsentrasi 5%, 6% dan 7% pada bahan basis gigi tiruan RAPP terhadap kekuatan impak dan transversal. Nanopartikel ZrO2 dilapisi dengan lapisan trimetoksisilipropilmetrilat (TMSPM) sebelum disonikasi dalam monomer ( MMA) dengan konsentrasi yang berbeda 5%, 6% dan 7% menurut beratnya. Rancangan penelitian ini adalah eksperimental laboratoris. Sampel penelitian ini adalah bentuk persegi panjang dengan ukuran batang uji 80 mm x 10 mm x 4 mm untuk uji kekuatan impak dan 65 mm x 10 mm x 2,5 mm untuk uji kekuatan transversal. Total sampel sebanyak 48 sampel terdiri dari 24 sampel untuk kelompok uji kekuatan impak dan 24 sampel untuk kelompok uji kekuatan transversal. Setiap sampel diuji Amslerotto Walpret Werke GMBH, Jerman untuk uji kekuatan Impak dan Electronic System Universal Testing Machine, Jepang untuk uji kekuatan transversal. Kesimpulan penambahan nanopartikel ZrO2 konsentrasi 5% dan 6% pada bahan basis gigi tiruan dari RAPP dapat meningkatkan kekuatan impak dan transversal namun dapat menurunkan kekuatan impak dan transversal dengan penambahan nanopartikel ZrO2 7% pada bahan basis gigi tiruan RAPP.
Heat polymerized acrylic resin is the most common material used for making denture base because of it’s advantages. However, this material still hasn’t fulfill all the ideal requirements as a denture base. Some disadvantages that need to be fixed are low impact and transverse strength causing an easy base of fracture. Several attempts were made to improve the mechanical properties of heat polymerized acrylic resin materials by adding reinforcing materials. Zirconium oxide is one of chemical group that can be used as a reinforcing material and polypropylene fiber which is including in fiber reinforcing groups. This study aims to determine whether there is a difference in the effect of the addition of 5% ZrO2 nanoparticles and 2% chopped polypropylene fibers 6 mm in length on the impact and transverse strength of heat polymerized acrylic resin denture base material. The design of this study is a laboratory experimental and the number of samples in this study are 60 samples. The result of this study shows the mean value of the impact and transverse strength of heat polymerized acrylic resin with ZrO2 nanoparticles reinforced is greater than the control group and heat polymerized acrylic resin group with polypropylene fiber reinforced with significant difference, and the mean value of impact and transverse strength of heat polymerized acrylic resin with polypropylene fibers reinforced is greater than the control group with significant difference.
Resin akrilik polimerisasi panas banyak digunakan sebagai bahan pembuat basis gigi tiruan karena memiliki beberapa kelebihan diantaranya bersifat biokompatibel, estetis baik, mudah diproses, tanpa membutuhkan tenaga ahli laboratorium dan harganya relatif murah. Namun, resin akrilik polimerisasi panas merupakan bahan basis gigi tiruan yang mudah mengalami fraktur karena memiliki kekuatan impak dan transversal yang kurang memadai. Kekuatan impak dan transversal dapat ditingkatkan dengan penambahan bahan penguat nanopartikel zirkonium oksida dan serat kaca. Penelitian ini bertujuan untuk mengetahui pengaruh penambahan nanopartikel zirkonium oksida konsentrasi 5% dan serat kaca potongan kecil ukuran 6 mm konsentrasi 2% pada bahan basis gigi tiruan resin akrilik polimerisasi panas terhadap kekuatan impak dan transversal. Rancangan penelitian ini adalah eksperimental laboratoris. Penelitian ini dilakukan pada sampel yang berukuran 80 mm x 10 mm x 4 mm untuk uji kekuatan impak dan 65 mm x 10 mm x 2,5 mm untuk uji kekuatan transversal. Jumlah keseluruhan sampel adalah 60 sampel yang terdiri dari 30 sampel untuk kelompok uji kekuatan impak dan 30 sampel untuk kelompok uji kekuatan transversal. Setiap sampel diuji menggunakan alat Amslerotto Walpret Werke GMBH, Germany untuk uji kekuatan impak dan Torsee’s Electronic System Universal Testing Machine untuk uji kekuatan transversal. Hasil penelitian menunjukkan bahwa bahan basis gigi tiruan resin akrilik polimerisasi panas dengan penambahan nanopartikel zirkonium oksida konsentrasi 5% menghasilkan kekuatan impak dan transversal lebih tinggi dan signifikan dari pada penambahan serat kaca potongan kecil ukuran 6 mm konsentrasi 2% dan tanpa penambahan bahan penguat.
Saat prosedur pengambilan cetakan dilakukan, darah dan saliva akan menempel pada hasil cetakan dan hal ini memungkinkan terjadinya infeksi silang. Tujuan penelitian ini adalah untuk mengetahui pengaruh desinfeksi model gipsum tipe III menggunakan sodium hypochlorite dan microwave terhadap kekuatan kompresi dan kekerasan permukaan. Penelitian ini adalah penelitian eksperimental laboratoris dan total sampel pada penelitian ini adalah 60 sampel gipsum tipe III, yang mana 30 sampel digunakan untuk meneliti kekuatan kompresi dan 30 sampel digunakan untuk meneliti kekerasan permukaan yang mana dua kelompok penelitian ini dibagi kepada tiga kelompok yaitu kelompok kontrol ( 10 sampel yang tidak desinfeksi), 10 sampel yang didesinfeksi dengan 0,5% sodium hypochlorite selama 10 menit dan 10 sampel didesinfeksi dengan microwave pada 550 Watt selama 10 menit dan data yang diperoleh dianalisa menggunakan uji ANOVA dan LSD. Hasil penelitian ditunjukkan terdapat perbedaan pengaruh desinfeksi model gipsum tipe III menggunakan 0,5% sodium hypochlorite selama 10 menit dan microwave pada 550 Watt selama 10 menit terhadap kekuatan kompresi dan kekerasan permukaan(p=0,0001<0,05).
Dental impressions often carry microorganisms that may cause cross infection from patients to dental staff. The control of cross infection is an imperative issue when dealing with dental impression materials in
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.