A new representation of the viscosity of propane includes a zero-density correlation and an initial-density dependence correlation based on the kinetic theory of dilute gases and on the Rainwater–Friend theory. The higher density contributions of the residual viscosity in the representation are formed by a combination of double polynomials in density and reciprocal temperature, and a free-volume term with a temperature-dependent close-packed density. The full surface correlation is based on a set of primary experimental data selected as a result of a critical assessment of the available information from 37 original viscosity studies. The review refers to 96 citations altogether. The validity of the representation extends from the triple point to 600 K and 100 MPa in accordance with the modified Benedict–Webb–Rubin equation of state. The uncertainty of the representation varies from ±0.4% for the viscosity of the dilute gas phase between room temperature and 600 K, to about ±2.5% for the range 100–475 K up to about 30 MPa, and to about ±4% for points outside this range. Tables of the viscosity according to the representative equations at selected temperatures and pressures and along the saturation line provide easy reference as well as the validation of computer codes.

An ab initio nonadditive three-body potential for argon has been developed using quantum-chemical calculations at the CCSD(T) and CCSDT levels of theory. Applying this potential together with a recent ab initio pair potential from the literature, the third and fourth to seventh pressure virial coefficients of argon were computed by standard numerical integration and the Mayer-sampling Monte Carlo method, respectively, for a wide temperature range. All calculated virial coefficients were fitted separately as polynomials in temperature. The results for the third virial coefficient agree with values evaluated directly from experimental data and with those computed for other nonadditive three-body potentials. We also redetermined the second and third virial coefficients from the best experimental pρT data utilizing the computed higher virial coefficients as constraints. Thus, a significantly closer agreement of the calculated third virial coefficients with the experimental data was achieved. For different orders of the virial expansion, pρT data have been calculated and compared with results from high quality measurements in the gaseous and supercritical region. The theoretically predicted pressures are within the very small experimental errors of ±0.02% for p ≤ 12 MPa in the supercritical region near room temperature, whereas for subcritical temperatures the deviations increase up to +0.3%. The computed pressure at the critical density and temperature is about 1.3% below the experimental value. At pressures between 200 MPa and 1000 MPa and at 373 K, the calculated values deviate by 1% to 9% from the experimental results.

Articles you may be interested in Ab initio potential energy surface for methane and carbon dioxide and application to vapor-liquid coexistence J. Chem. Phys. 141, 064303 (2014) A five-dimensional potential energy surface (PES) for the interaction of a rigid methane molecule with a rigid nitrogen molecule was determined from quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the CCSD(T) level of theory was utilized to compute a total of 743 points on the PES. The interaction energies were calculated using basis sets of up to quadruple-zeta quality with bond functions and were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites for methane and five sites for nitrogen was fitted to the interaction energies. The PES was validated by calculating the cross second virial coefficient as well as the shear viscosity and binary diffusion coefficient in the dilute-gas limit for CH 4 -N 2 mixtures. An improved PES was obtained by adjusting a single parameter of the analytical potential function in such a way that quantitative agreement with the most accurate experimental values of the cross second virial coefficient was achieved. The transport property values obtained with the adjusted PES are in good agreement with the best experimental data. © 2014 AIP Publishing LLC.

No abstract

A six-dimensional potential energy hypersurface (PES) for two interacting rigid hydrogen sulfide molecules was determined from high-level quantum-mechanical ab initio computations. A total of 4016 points for 405 different angular orientations of two molecules were calculated utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory and extrapolating the calculated interaction energies to the complete basis set limit. An analytical site-site potential function with eleven sites per hydrogen sulfide molecule was fitted to the interaction energies. The PES has been validated by computing the second pressure virial coefficient, shear viscosity, thermal conductivity and comparing with the available experimental data. The calculated values of volume viscosity were not used to validate the potential as the low accuracy of the available data precluded such an approach. The second pressure virial coefficient was evaluated by means of the Takahashi and Imada approach, while the transport properties, in the dilute limit, were evaluated by utilizing the classical trajectory method. In general, the agreement with the primary experimental data is within the experimental error for temperatures higher than 300 K. For lower temperatures the lack of reliable data indicates that the values of the second pressure virial coefficient and of the transport properties calculated in this work are currently the most accurate estimates for the thermophysical properties of hydrogen sulfide.