No abstract

A new realization of the International Celestial Reference Frame (ICRF) is presented based on the work achieved by a working group of the International Astronomical Union (IAU) mandated for this purpose. This new realization follows the initial realization of the ICRF completed in 1997 and its successor, ICRF2, adopted as a replacement in 2009. The new frame, referred to as ICRF3, is based on nearly 40 years of data acquired by very long baseline interferometry at the standard geodetic and astrometric radio frequencies (8.4 and 2.3 GHz), supplemented with data collected at higher radio frequencies (24 GHz and dual-frequency 32 and 8.4 GHz) over the past 15 years. State-of-the-art astronomical and geophysical modeling has been used to analyze these data and derive source positions. The modeling integrates, for the first time, the effect of the galactocentric acceleration of the solar system (directly estimated from the data) which, if not considered, induces significant deformation of the frame due to the data span. The new frame includes positions at 8.4 GHz for 4536 extragalactic sources. Of these, 303 sources, uniformly distributed on the sky, are identified as “defining sources” and as such serve to define the axes of the frame. Positions at 8.4 GHz are supplemented with positions at 24 GHz for 824 sources and at 32 GHz for 678 sources. In all, ICRF3 comprises 4588 sources, with three-frequency positions available for 600 of these. Source positions have been determined independently at each of the frequencies in order to preserve the underlying astrophysical content behind such positions. They are reported for epoch 2015.0 and must be propagated for observations at other epochs for the most accurate needs, accounting for the acceleration toward the Galactic center, which results in a dipolar proper motion field of amplitude 0.0058 milliarcsecond yr−1 (mas yr−1). The frame is aligned onto the International Celestial Reference System to within the accuracy of ICRF2 and shows a median positional uncertainty of about 0.1 mas in right ascension and 0.2 mas in declination, with a noise floor of 0.03 mas in the individual source coordinates. A subset of 500 sources is found to have extremely accurate positions, in the range of 0.03–0.06 mas, at the traditional 8.4 GHz frequency. Comparing ICRF3 with the recently released Gaia Celestial Reference Frame 2 in the optical domain, there is no evidence for deformations larger than 0.03 mas between the two frames, in agreement with the ICRF3 noise level. Significant positional offsets between the three ICRF3 frequencies are detected for about 5% of the sources. Moreover, a notable fraction (22%) of the sources shows optical and radio positions that are significantly offset. There are indications that these positional offsets may be the manifestation of extended source structures. This third realization of the ICRF was adopted by the IAU at its 30th General Assembly in August 2018 and replaced the previous realization, ICRF2, on January 1, 2019.

We present the second realization of the International Celestial Reference Frame (ICRF2) at radio wavelengths using nearly 30 years of Very Long Baseline Interferometry observations. ICRF2 contains precise positions of 3414 compact radio astronomical objects and has a positional noise floor of ∼40 μas and a directional stability of the frame axes of ∼10 μas. A set of 295 new "defining" sources was selected on the basis of positional stability and the lack of extensive intrinsic source structure. The positional stability of these 295 defining sources and their more uniform sky distribution eliminates the two greatest weaknesses of the first realization of the International Celestial Reference Frame (ICRF1). Alignment of ICRF2 with the International Celestial Reference System was made using 138 positionally stable sources common to both ICRF2 and ICRF1. The resulting ICRF2 was adopted by the International Astronomical Union as the new fundamental celestial reference frame, replacing ICRF1 as of 2010 January 1.

No abstract

This paper summarizes the creation and technical evolution of atomic time scales, recalling the parallel development of their acceptance and the remaining problems. We consider a consequence of the accuracy of time measurement, i.e. the entry of Einstein's general relativity into metrology and its applications. We give some details about the method of calculation and the characteristics of International Atomic Time, and we show how it is disseminated at the ultimate level of precision.

Context. The very large and increasing number of quasars reckoned from various sky surveys leads to a large quantity of data which brings various and inhomogeneous information in the fields of astrometry, photometry, radioastronomy and spectroscopy. Aims. In this paper, we describe our work that aims to make available a general compilation of the largest number of recorded quasars obtained from all the available catalogues, with their best position estimates, and providing physical information at both optical and radio wavelengths. Thus, we construct a catalogue compilation designated Large Quasar Astrometric Catalogue (LQAC) giving coordinates, multiband photometry, radio fluxes, redshift, luminosity distances and absolute magnitudes. Methods. We gather the 12 largest quasar catalogues (4 from radio interferometry programs, 8 from optical surveys), and we carry out systematic cross-identifications of the objects. Information concerning u, b, v, g, r, i, z, J, K photometry as well as redshift and radio fluxes at 1.4 GHz, 2.3 GHz, 5.0 GHz, 8.4 GHz and 24 GH are given when available. A small proportion of remaining objects, not present in the 12 catalogues and included in the Véron-Cetty & Véron quasar catalogues, are added to the compilation. Results. The LQAC contains 113 666 quasars. We discuss the external homogeneity of the data by comparing the coordinates, the redshifts and the magnitudes of objects belonging to different catalogues. We use up-to-date cosmological parameters as well as recent models for galactic extinction and K-correction in order to evaluate the absolute magnitudes of the objects.

This article reviews the creation and technical evolution of atomic time scales. In particular, we focus our attention on the method of calculation and the characteristics of International Atomic Time (TAI), and show how it is disseminated at the ultimate level of precision.

This paper reviews the present status of the timescales established at the International Bureau of Weights and Measures (BIPM). We focus our attention on the calculation and the characteristics of Coordinated Universal Time (UTC) and present its applications.