1 Reaktive Brandschutzbeschichtungssysteme Intumeszierende Brandschutzbeschichtungen sind reaktive Brandschutzbeschichtungen, die bei Temperaturbeanspruchung im Brandfall eine wärmedämmende Wirkung entwickeln und so das Trägermaterial schützen. Dabei erhöhen reaktive Brandschutzbeschichtungen sehr effektiv den Feuerwiderstand von Stahl-und Holzkon-Wesentlich für das Sicherheitsniveau und damit die nachhaltige Wettbewerbsfähigkeit des Technologiestandorts Deutschland ist der Brandschutz in Industrieanlagen, in Gebäuden und im Transportwesen. Der vorbeugende bauliche Brandschutz hat u. a. das Ziel, die Brand-und Rauchausbreitung im Brandfall für eine gewisse Zeit zu behindern, damit die erforderlichen Lösch-und Rettungsarbeiten durchgeführt werden können. Dies geschieht u. a. durch Anforderungen an die Feuerwiderstandsfähigkeit brandbeanspruchter Bauteile. Der Feuerwiderstand eines Bauteils ist die Fähigkeit, während eines angegebenen Zeitraums in einer genormten Feuerwiderstandsprüfung bezüglich mechanischer Stabilität und/oder thermischer Isolierung nicht zu versagen. Reaktive Brandschutzbeschichtungen erhöhen für viele Bauteile sehr effektiv den Feuerwiderstand. Die Beschichtungen und die Brandprüfungen müssen jedoch an die immer komplexeren Anwendungen und/oder extremeren Anforderungen angepasst und weiterentwickelt werden. Aktuelle Forschungsschwerpunkte liegen dabei in der Entwicklung neuer Materialien (z. B. Geopolymere, keramisierende Beschichtungen, silikonbasierte Beschichtungen) für extreme Brandszenarien (extreme Temperaturen, lange Beanspruchungszeiten) und in der Realisierung komplexer Funktionalitäten (komplexe Geometrien, bewegliche Komponenten) sowie in der Entwicklung neuer Testmethoden (Feuerwiderstand als Bench-scale-Tests, kostengünstiges Screening, Feuerwiderstand in extremen Brandszenarien). Die Entwicklung geht dabei weg von der präskriptiven Bewertung hin zur leistungsorientierten (performance-based) Bewertung in individuellen Brandszenarien oder von komplexen Bauteilen. Im Rahmen dieser Arbeit werden Lösungsansätze für die neuen Herausforderungen an die reaktiven Brandschutzsysteme unter Extrembedingungen und deren Testmöglichkeiten vorgestellt und diskutiert. Im Mittelpunkt stehen dabei neu entwickelte Benchscale-Testmethoden zum Screening von neuen Beschichtungsmaterialien sowie zur Beurteilung spezieller bzw. materialspezifischer Aspekte des Feuerwiderstands unter Extrembedingungen.New ways: Reactive fire protection coatings for extreme conditions Fire safety in industrial plants, buildings and transportation is essential for the safety level and sustainable competitiveness of Germany as a technology location. The aim of preventative structural fire protection is to prevent fire and smoke propagation in the case of fire for a certain period of time, with the result that required firefighting and rescue operations can be carried out. This is done, among others, by requirements on fire resistance of fire-stressed components. The fire resistance of a component is the ability to keep mechan...
Zur brandschutztechnischen Ertüchtigung von Stahlkonstruktionen werden reaktive Brandschutzsysteme aufgrund der geringen Beschichtungsdicken und der profilfolgenden Applikation in zunehmendem Maße eingesetzt. Da die für Zugstabsysteme eingesetzten Bauteile meist eine stark konvex gekrümmte Oberfläche aufweisen und der Anschlussbereich über eine vergleichsweise komplexe Geometrie verfügt, stellt dies besonders hohe Anforderungen an die Leistungsfähigkeit von reaktiven Brandschutzsystemen. Anhand von realmaßstäblichen Brandversuchen wurden das Aufschäumungs‐ und Rissverhalten, der Einfluss der Trockenschichtdicke, die Erwärmung der einzelnen Stahlbauteile sowie der Einfluss der Bauteilorientierung untersucht. Die Ergebnisse zeigen, dass eine Abnahme der Oberflächenkrümmung oder eine Erhöhung der Massenkonzentration der Stahlbauteile zu einer geringeren Aufheizrate des Stahls führt. Darüber hinaus ist festzustellen, dass die Leistungsfähigkeit des reaktiven Brandschutzsystems von der Bauteilorientierung der Zugstabsysteme beeinflusst wird. Die durchgeführten Brandversuche können zur Entwicklung geeigneter Prüfszenarien für die Beurteilung von reaktiven Brandschutzsystemen auf Zugstabsystemen und deren Anschlusskonstruktionen verwendet werden, wodurch eine Erweiterung des zulassungsbasierten Anwendungsbereichs ermöglicht wird.
Reaktive Brandschutzsysteme werden in zunehmendem Maße zum Schutz von sichtbaren Stahlkonstruktionen eingesetzt, weil mit den relativ geringen Beschichtungsdicken das architektonische Erscheinungsbild der Konstruktionen erhalten bleibt. Die Verwendbarkeit der Systeme wird durch nationale und europäische technische Zulassungen geregelt. Die Zulassungen erlauben eine Anwendung auf zugbeanspruchten Bauteilen nur unter Einschränkungen. Eine Verwendung der Systeme auf Zuggliedern mit Vollquerschnitt ist derzeit nicht abgedeckt. Dieser Beitrag beschreibt die aktuelle Situation zur Anwendung reaktiver Brandschutzsysteme und erläutert die physikalisch‐technischen Hintergründe. Ferner wird anhand eines Beispiels außerhalb des Anwendungsbereiches der Zulassungen gezeigt, wie eine Anwendung auf Zuggliedern mit rundem Vollquerschnitt im Rahmen einer Zustimmung im Einzelfall ermöglicht werden kann. In einem weiteren Abschnitt werden die jüngsten Forschungsergebnisse aus einem durch das Deutsche Institut für Bautechnik geförderten und durch die Bundesanstalt für Materialforschung und ‐prüfung bearbeiteten Vorhabens vorgestellt. Das Forschungsvorhaben verfolgt das Ziel, eine Anwendung reaktiver Brandschutzsysteme auf Zuggliedern mit Vollquerschnitten auf Grundlage von Zulassungen allgemein zu ermöglichen.Application of reactive fire protection systems to steel rods in tension. The application of intumescent coatings for fire protection of steel constructions is increasing. Thanks to the relative thin thickness of the coatings, the typical visual appearance of the structures can be preserved. The applicability of the systems is regulated by the national German as well as European technical approvals. According to the approvals, the application on steel members in tension is only allowed with limitations. Especially, the application on solid steel rods in tension is currently not yet covered. This contribution first explains the actual state of the art of the application of reactive fire protection systems to steel structures. Technical background information is provided. Furthermore, a case study is presented in order to illustrate the limitations in the scope of the approvals and a possible approach to allow the application of intumescent coatings on solid steel rods via an approval for a specific construction project. After that, the latest scientific results of a research project funded by the German National Institute of Building Technology (DIBt) and conducted by the Federal Institute for Materials Research and Testing (BAM) are described. The objective of the project is to enable the application of intumescent coatings on solid steel rods in tension within the scope of approvals in general.
Reaktive Brandschutzsysteme können die Feuerwiderstandsdauer von Stahlbauteilen signifikant erhöhen. Im Brandfall schäumt das reaktive Brandschutzsystem auf und bildet um das Stahlbauteil eine thermische Schutzschicht aus. Dadurch wird die Erwärmung des Stahls verlangsamt und der temperaturbedingte Festigkeitsverlust verzögert. Reaktive Brandschutzsysteme werden überwiegend in drei Bereichen angewendet: Hochbau, Offshore bzw. maritimer Sektor sowie Tank‐ bzw. Behälterbau. Insbesondere bei Stahltanks und ‐behältern sind häufig einfach oder auch doppelt gekrümmte Bauteiloberflächen anzutreffen. Aufgrund des meist begrenzten seitlichen Expansionsvermögens von reaktiven Brandschutzsystemen kann es bei Bauteilen mit konvexer Oberflächenkrümmung zu einer Intensivierung der Rissbildung im Schaum kommen, wodurch sich häufig die thermische Schutzwirkung verschlechtert. Da zum Thema des Einflusses der Oberflächenkrümmung auf die Leistungsfähigkeit reaktiver Brandschutzsysteme bisher kaum Untersuchungen vorliegen, wurden exemplarisch zwei Tankböden mit zwei verschiedenen Trockenschichtdicken eines reaktiven Brandschutzsystems einer Brandprüfung unterzogen. Bei gleicher Trockenschichtdicke des reaktiven Brandschutzsystems zeigten die Tankböden eine wesentlich schnellere Erwärmung als ebene Stahlplatten mit vergleichbarem Profilfaktor. Die Brandprüfungen und die Ergebnisse zum Einfluss der Oberflächenkrümmung werden im Beitrag ausführlich vorgestellt und diskutiert.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.