A planar inverted F-implantable antenna is designed using the medical implant communications service (MICS) band (402–405MHz).The proposed antenna is designed using microstrip lines and short-circuited pin connecting between the ground plane and the patch. The total size of the proposed antenna is (24×32×2 mm3). The patch dimensions are (16×24 mm2). The calculated bandwidth at a return loss of -10 dB is 1MHz. The S-parameters, the near and far-fields, and the specific absorption rate (SAR) of the antenna is simulated and characterized. The design is carried out using CST Studio.

A flexible antenna of compact size with a dual band elliptical-shape implantable is designed for biomedical purposes. The suggested antenna has an elliptical shape to be more comfortable for being implanted in human tissue. The implantable antenna is printed on RO3010 substrate with 2 mm as a thickness and 10.2 as a dielectric constant. It consists of an active planar C-shaped element and a parasitic planar inverted C-shaped element. The proposed antenna is designed with a major axis radius of 12 mm and a minor axis radius of 8 mm . It operates in dual bands: The Industrial Scientific and Medical band (ISM) [2.4 GHz–3.5 GHz] and Medical Implant Communications Service band (MICS) [394 MHz–407.61 MHz]. A short-circuited pin is used to minimize the antenna’s overall size and for further size reduction a capacitive load is used between the radiator and the ground plane. For biocompatibility, a thin-thickness layer of Alumina is used as a superstrate. The suggested antenna is tested in a multi-layer tissue model and the Specific Absorption Rate (SAR) value is computed. The proposed antenna was fabricated, and the reflection coefficient is measured and compared with simulated results.

In this paper, a compact-size multiple-band planar inverted L-C implantable antenna is proposed. The compact antenna has a size of 20 mm × 12 mm × 2.2 mm and consists of planar inverted C-shaped and L-shaped radiating patches. The designed antenna is employed on the RO3010 substrate (εr = 10.2, tanδ = 0.0023, and thickness = 2 mm). An alumina layer with a thickness of 0.177 mm (εr = 9.4 and tanδ = 0.006) is used as the superstrate. The designed antenna operates at triple-frequency bands with a return loss of −46 dB at 402.5 MHz, −33.55 dB at 2.45 GHz, and −41.4 dB at 2.95 GHz, and provides a size reduction of 51% compared with the conventional dual-band planar inverted F-L implant antenna designed in our previous study. In addition, the SAR values are within the safety limits with a maximum allowable input power (8.43 mW (1 g) and 47.5 mW (10 g) at 402.5 MHz; 12.85 mW (1 g) and 47.8 mW (10 g) at 2.45 GHz; and 11 mW (1 g) and 50.5 mW (10 g) at 2.95 GHz). The proposed antenna operates at low power levels and supports an energy-efficient solution. The simulated gain values are −29.7 dB, −3.1 dB, and −7.3 dB, respectively. The suggested antenna is fabricated and the return loss is measured. Our findings are then compared with the simulated results.

In this work a compact size capacitive load dual band planar inverted-F implant antenna is presented. The suggested antenna is modeled on RO3010 substrate that has a thickness of 2 mm, dielectric constant of 10.2, and tangent loss of 0.0023 to operate at both the Medical Implant Communications Services (MICS) and Industrial, Scientific, and Medical (ISM) bands. A capacitive load is inserted between the patch and the ground plane to get a dual band and compact size implant antenna. The antenna size is 20× 12×2 mm3. The antenna designed in this work operates at 402MHz with a return loss of -23.23dB over a frequency band [397.15-409.4MHz] for MICS band and operates at 2.42GHz with a return loss of -20dB over a frequency band [2.37-3GHz] for ISM band. The simulated gain is -27.52dBi at 402MHz for MICS band and − 1.85dBi at 2.42GHz for ISM band. The proposed antenna has a good performance inside three-layered tissue model. The Computer Simulation Technologies (CST) Microwave studio is used to model and simulate the proposed antenna.

In this work a compact size capacitive load dual band planar inverted-F implant antenna is presented.The suggested antenna is modeled on RO3010 substrate that has a thickness of 2 mm, dielectric constant of 10.2, and tangent loss of 0.0023 to operate at both the Medical Implant Communications Services (MICS) and Industrial, Scienti c, and Medical (ISM) bands. A capacitive load is inserted between the patch and the ground plane to get a dual band and compact size implant antenna. The antenna size is 20× 12×2 mm 3 . The antenna designed in this work operates at 402MHz with a return loss of -23.23dB over a frequency band ] for MICS band and operates at 2.42GHz with a return loss of -20dB over a frequency band [2.37-3GHz] for ISM band. The simulated gain is -27.52dBi at 402MHz for MICS band and − 1.85dBi at 2.42GHz for ISM band. The proposed antenna has a good performance inside three-layered tissue model. The Computer Simulation Technologies (CST) Microwave studio is used to model and simulate the proposed antenna.