Silver nanoparticles were prepared by chemical reduction method using chitosan as stabilizer and ascorbic acid as reducing agent in this work. The silver/chitosan nanocomposites were characterized in terms of their particle sizes and morphology by using UV spectrophotometer, nano-grainsize analyzer, and transmission electron microscopy. Antibacterial activities of these nanocomposites were carried out for Staphylococcus aureus and Escherichia coli. The silver nanoparticles exhibited significantly inhibition capacity towards these bacteria. Detailed studies on the biocompatibility of the silver/chitosan nanocomposites were investigated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and cell adhesion test. The results indicated that these silver/chitosan nanocomposites were benefit for the proliferation and adhesion of L-929 cells, and the biocompatibilities between the nanocomposites and the cells would become better with the culturing days. We anticipated that these silver/chitosan nanocomposites could be a promising candidate as coating material in biomedical engineering and food packing fields wherein antibacterial properties and biocompatibilities are crucial.
Abstract. By mixing macromolecular blowing agent grafted nano-SiO2 with polypropylene (PP) melt, the nanoparticle agglomerates can be pulled apart due to the in-situ bubble-stretching resulting from gasification of the side foaming groups on the grafted polymer. The present work evaluated the interfacial effect in the PP based nanocomposites prepared using the aforesaid technique through introducing rubbery components to the backbone of the grafted polymer chains. The results indicated that deagglomeration of the nanoparticles was not bound to yield the highest properties of the composites. The positive effect of the nanoparticles was brought into full play because of the joint contributions of particles dispersion status and interfacial interaction. An interlayer with proper flexibility ensured an overall enhancement of mechanical properties, especially impact strength, of the nanocomposites. : nanomaterials, processing technologies, nanoparticles, nanocomposites, interfacial effect eXPRESS Polymer Letters Vol.1, No.1 (2007) [2][3][4][5][6][7] Available online at www.expresspolymlett.com DOI: 10.3144/expresspolymlett.2007.2 defoaming of the compounds was not necessary prior to injection molding. It implies that this technique could lead to deagglomeration of the nanoparticles when nanocomposites are being manufactured, without side effect that might deteriorate performance. For polymer-based nanocomposites, an appropriate surface treatment of inorganic nanoparticles should not only improve dispersion of the fillers, but also bring about notable influence on the interfacial characteristics, and subsequently enhance the mechanical properties of the ultimate composites [6]. Considering that graft treatment of nanoparticles leads to specific interfacial structures that can be tailored by changing graft monomers and graft conditions [7], the authors of the present work planned to introduce polymer chain units with relatively higher molecular mobility (i.e., poly(butyl acrylate)) into the aforesaid grafted polymeric foaming agent poly(p-vinylphenylsulfonylhydrazide) through copolymerization. It is hoped that the stiffness of the interlayer in the nanocomposites originally constructed by the grafted poly(p-vinylphenylsulfonylhydrazide) containing rigid phenyl groups can be somewhat balanced. In accordance with this idea, poly(p-vinylphenylsulfonylhydrazide-co-butyl acrylate) grafted nanosilica was synthesized. Afterwards, the treated nanoparticles were melt compounded with PP. With the help of in-situ bubble-stretching effect and the flexible interphase, agglomerated silica nanoparticles should be disconnected from each other and adhered to the matrix polymer via the grafted copolymer chains (Figure 1). In this paper, the feasibility of this technical route was analyzed by characterizing the grafted nano-silica and their influence on the structure and properties of PP based composites. Keywords Experimental MaterialsSilica (Aerosil 200) was supplied by Degussa Co., Germany with an average diameter of 12 nm and ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.