A rectangular plate with a central hole have initiate extensive practical applications in different fields of engineering such as aerospace, marine, automobile and mechanical and is well-known to most engineers. High stress due to discontinuity or abrupt change in geometry is known as stress concentration and is mostly set up at the edges of discontinuity. A stress concentration is typically introduced in plates in the form of circular holes. For the design of plate with a hole, proper knowledge of stresses and stress concentration factor (SCF) at the edge of hole under in plane loading are essential. In this project an attempt is made to review the investigations that have been made on the "stress analysis of a rectangular plate with circular hole". Finite Element simulations using Ansys have been done for stress analysis around the circular hole, made up of different materials. The materials considered are composite material i.e carbon / epoxy and also with mild steel.
In this research work the mechanical and erosion wear behavior of E-Glass fiber reinforced epoxy based hybrid composites were determined. Fillers like coal fly ash (CFA), Coal powder (CP) and mixture of coal fly ash and coal powder (CFA-CP) at different weight proportions of 0wt%, 5wt% and 10wt% were mixed with Epoxy Resin and composites were fabricated by manual hand lay-up technique with 50wt% of Glass Fiber as reinforcement and the prepared composites were cut in to specimens as per ASTM standards for mechanical characterizations like tensile, flexural, ILSS, Impact and Hardness properties and erosion wear behavior. Experimental analysis shows that the tensile strength of unfilled Epoxy-Glass composites is maximum (252.189MPa) where as for 10wt% coal fly ash filled epoxy-glass composites tensile modulus is maximum (7.823 GPA). The flexural strength and ILSS are 750.54 MPa and 25.188 MPa respectively for 10 wt% CP filled hybrid composites. The impact strength and hardness are 2100 J/m and 62Hv for 10wt% CFA-CP filled epoxy composites. Coming to erosion wear behavior of composites filled with CFA-CP have exhibited maximum erosion wear resistance when compared with CFA filled epoxy composites. It is observed that with the increase in weight percentages of the filler material. The mechanical properties and erosion wear resistance of the composites were enhanced. Hence, for structural applications filler materials mixed Glass- Epoxy hybrid composites can be used in place of plain glass fiber reinforced epoxy composites due to the enhanced properties of composites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.